[Gluster-users] Failure to copy read-only files to gluster volume

Lana Deere lana.deere at gmail.com
Tue Nov 30 15:33:04 UTC 2010


After I sent the previous mail, bug 2046 was updated to indicate that
it is very similar in symptom to bug 2058.  2058 is marked fixed in
3.1.1, so I'm going to try upgrading even though you indicated it
didn't work for you.

For what it's worth, I also have rdma installed but I'm actually using
it as my transport (Infiniband).

.. Lana (lana.deere at gmail.com)






On Tue, Nov 30, 2010 at 10:01 AM, isdtor <isdtor at gmail.com> wrote:
> On 30 November 2010 12:57, Lana Deere <lana.deere at gmail.com> wrote:
>> To me, this looks very similar to bug #2046
>>   http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2046
>>
>> I can confirm I have the same symptom as you are seeing when I follow
>> your instructions about ps (on 3.1.0).
>>
>> $ ls -l /bin/ps
>> -r-xr-xr-x 1 root root 83696 Jan 21  2009 /bin/ps*
>> $ cp -p /bin/ps .
>> cp: writing `./ps': Permission denied
>> cp: closing `./ps': Permission denied
>>
>> I also have CentOS 5.5 servers and 5.4 clients.
>>
>> I would be curious if you get the same symptom for the tarfile from
>> 2046, because that doesn't seem to be reproducing in the gluster lab.
>
> Yes, I get the same for your tar file. Works fine for root, but not non-root.
>
> I'm wondering if this is related to rdma somehow. The rdma rpm is
> installed, but I
> was under the impression that it is only used for 10Gig ethernet?
> Should I remove
> the rdma rpms? The volume/bricks were explicitly configured for tcp.
>
> [2010-11-20 22:36:31.673830] I [glusterd.c:274:init] management: Using
> /etc/glusterd as working directory
> [2010-11-20 22:36:31.844164] C [rdma.c:3817:rdma_init]
> rpc-transport/rdma: No IB devices found
> [2010-11-20 22:36:31.844178] E [rdma.c:4744:init] rdma.management:
> Failed to initialize IB Device
> [2010-11-20 22:36:31.844185] E
> [rpc-transport.c:965:rpc_transport_load] rpc-transport: 'rdma'
> initialization failed
> [2010-11-20 22:36:31.869124] I [glusterd.c:86:glusterd_uuid_init]
> glusterd: retrieved UUID: 08e8e15b-0fa1-4064-90c6-2ba4ca7c9e4f
>
> and
>
> [2010-11-30 20:20:38.548621] I [fuse-bridge.c:2817:fuse_init]
> glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.13
> kernel 7.10
> [2010-11-30 20:20:50.849901] W [fuse-bridge.c:1757:fuse_writev_cbk]
> glusterfs-fuse: 74: WRITE => -1 (Permission denied)
> [2010-11-30 20:20:50.869463] W [fuse-bridge.c:827:fuse_err_cbk]
> glusterfs-fuse: 75: FLUSH() ERR => -1 (Permission denied)
>
> Both logs from the client.
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>



More information about the Gluster-users mailing list