[Gluster-users] Gluster reexport through NFS problem with FUSE

[Basavanagowda Kanur]

Martin,
   Please configure glusterfs build with '--enable-fuse-client'. You need to
have fuse installed.

--
gowda

On Thu, Nov 6, 2008 at 7:18 PM, Martin Gumbau <mgumbau at iciq.es> wrote:

> Hi,
> I don't obtain succesfully results to reexport NFS from Glusterfs.
> With fuse kernel module that was in SuSE SLES 10 SP2 distribution the
> glusterfs client mount ok.
>
> I read README.NFS (from fuse-2.7.4 or fuse -2.7.3 or fuse-2.7.3glfs10)
> as Avati said to me. Then I compile the fuse module with
> --enable-kernel-module option (previus make clean).
>
> The kernel 2.6.16.60-0.21-smp .config option
> CONFIG_FUSE_FS=m
>
> These are my files:
> NFSSERVER - exports
>
> /mnt/glusterfs *(no_subtree_check,async,no_auth_nlm,no_acl,rw,fsid=10)
>
> GLUSTERFS - command line:
>
> glusterfs --disable-io-mode=none -l/var/log/glusterfs/gfscli.log -LDEBUG
> -f /etc/glusterfs/glusterfs-client.vol /mnt/glusterfs
>
> LOGFILE - gfscli.log
>
> 2008-11-06 14:24:59 D [glusterfs.c:167:get_spec_fp] glusterfs: loading
> spec from /etc/glusterfs/glusterfs-client.vol
> 2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for
> 'sirius00'
> 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
> load file /usr/local/lib/glusterfs/1.3.12/xlator/protocol/client.so
> 2008-11-06 14:24:59 D [spec.y:127:section_type] parser:
> Type:sirius00:protocol/client
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius00:transport-type:tcp/client
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius00:remote-host:10.3.1.200
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius00:remote-subvolume:brick
> 2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:sirius00
> 2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for
> 'sirius01'
> 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
> load file /usr/local/lib/glusterfs/1.3.12/xlator/protocol/client.so
> 2008-11-06 14:24:59 D [spec.y:127:section_type] parser:
> Type:sirius01:protocol/client
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius01:transport-type:tcp/client
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius01:remote-host:10.3.1.201
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius01:remote-subvolume:brick
> 2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:sirius01
> 2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for
> 'mirror0'
> 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
> load file /usr/local/lib/glusterfs/1.3.12/xlator/cluster/afr.so
> 2008-11-06 14:24:59 D [spec.y:127:section_type] parser:
> Type:mirror0:cluster/afr
> 2008-11-06 14:24:59 D [spec.y:196:section_sub] parser:
> child:mirror0->sirius00
> 2008-11-06 14:24:59 D [spec.y:196:section_sub] parser:
> child:mirror0->sirius01
> 2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:mirror0
> 2008-11-06 14:24:59 D [glusterfs.c:128:fuse_graph] glusterfs: setting
> option mount-point to /mnt/glusterfs
> 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
> load file /usr/local/lib/glusterfs/1.3.12/xlator/mount/fuse.so
> 2008-11-06 14:24:59 E [fuse-bridge.c:2699:init] glusterfs-fuse:
> fuse_mount failed (No such file or directory)
>
> 2008-11-06 14:24:59 E [glusterfs.c:547:main] glusterfs: Initializing
> FUSE failed
>
>
>
>
> --
> Martin Gumbau - mgumbau at iciq.es
> Responsable Informatic
> dels grups teorics
> de Quimica Computacional
> del ICIQ
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
>



-- 
hard work often pays off after time, but laziness always pays off now
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20081106/168adb3b/attachment.html>