[Gluster-users] any one uses all flash GlusterFS setup?

[Arman Khalatyan]

great hints, thanks a lot, going to test all this tomorrow.
I have an appointment with IT department for enabling the LACP bonds on
10gig dual port interfaces, so next will test the latency, and
ssd+xfs+glusterfs.
we did not touch default mtu, i did some tests  with CentOS7.3 on IB with
65k mtu connected mode ipoib, was ok but not stable on the large workloads,
maybe now the situation has been changed.
are there any suggestions on lacp-bonds and mtu sizes?



Strahil Nikolov <hunter86_bg at yahoo.com> schrieb am Mo., 29. März 2021,
19:02:

> I guess there is no need to mention that lattency is the real killer of
> Gluster. What is the DC-to-DC lattency and MTU (ethernet) ?
> Also, if you use SSDs , consider using noop/none I/O schedulers.
>
> Also, you can obtain the tuned profiles used in Red Hat Gluster Storage
> via this source rpm:
>
>
> http://ftp.redhat.com/redhat/linux/enterprise/7Server/en/RHS/SRPMS/redhat-storage-server-3.5.0.0-7.el7rhgs.src.rpm
>
> You can combine the settings from the tuned profile for Hypervisor and
> combine it with the gluster random I/O tuned profile.
>
> Also worth mentioning, RHGS uses 512M shard size, while default in
> upstream gluster is just 64M. Some oVirt users have reported issues and
> suspect is gluster's inability to crwate enough shards.
>
> WARNING: ONCE SHARDING IS ENABLED, NEVER EVER DISABLE IT.
>
> Best Regards,
> Strahil Nikolov
>
> On Mon, Mar 29, 2021 at 11:03, Arman Khalatyan
> <arm2arm at gmail.com> wrote:
> Thanks Strahil,
> good point on choose-local, definitely we will try.
> the connection is: 10Gbit, also FDR Infiniband( ipoib will be used).
> we are still experimenting with 2 buildings and 8 nodes ovirt+ changing
> the bricks number on glusterfs.
>
> Strahil Nikolov <hunter86_bg at yahoo.com> schrieb am So., 28. März 2021,
> 00:35:
>
> It's worth mentioning that if your network bandwidth is smaller than the
> raid bandwidth, you can consider to enable the cluster.choose-local (which
> oVirt's optimizations disable) for faster reads.
>
> Some people would also consider going with JBOD (replica 3) mode. I guess
> you can test both prior moving to prod phase
>
>
> P.S.: Don't forget to align the LVM/FS layer to the hardware raid.
>
> Best Regards,
> Strahil Nikolov
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20210329/a4bdb9f9/attachment.html>