[Gluster-users] Erroneous "No space left on device." messages
Pat Haley
phaley at mit.edu
Tue Mar 10 19:47:49 UTC 2020
Hi,
If I understand this, to remove the "No space left on device" error I
either have to clear up 10% space on each brick, or clean-up a lesser
amount and reset cluster.min-free. Is this correct?
I have found the following command for resetting the cluster.min-free
*
gluster volume set <volume> cluster.min-free-disk <value>
Can this be done while the volume is live? Does the <value> need to be
an integer?
Thanks
Pat
On 3/10/20 2:45 PM, Pat Haley wrote:
>
> Hi,
>
> I get the following
>
> [root at mseas-data2 bricks]# gluster volume get data-volume all | grep
> cluster.min-free
> cluster.min-free-disk 10%
> cluster.min-free-inodes 5%
>
>
> On 3/10/20 2:34 PM, Strahil Nikolov wrote:
>> On March 10, 2020 8:14:41 PM GMT+02:00, Pat Haley <phaley at mit.edu>
>> wrote:
>>> HI,
>>>
>>> After some more poking around in the logs (specifically the brick logs)
>>>
>>> * brick1 & brick2 have both been recording "No space left on device"
>>> messages today (as recently at 15 minutes ago)
>>> * brick3 last recorded a "No space left on device" message last night
>>> around 10:30pm
>>> * brick4 has no such messages in its log file
>>>
>>> Note brick1 & brick2 are on one server, brick3 and brick4 are on the
>>> second server.
>>>
>>> Pat
>>>
>>>
>>> On 3/10/20 11:51 AM, Pat Haley wrote:
>>>> Hi,
>>>>
>>>> We have developed a problem with Gluster reporting "No space left on
>>>> device." even though "df" of both the gluster filesystem and the
>>>> underlying bricks show space available (details below). Our inode
>>>> usage is between 1-3%. We are running gluster 3.7.11 in a
>>> distributed
>>>> volume across 2 servers (2 bricks each). We have followed the thread
>>>>
>>> https://lists.gluster.org/pipermail/gluster-users/2020-March/037821.html
>>>
>>>
>>>> but haven't found a solution yet.
>>>>
>>>> Last night we ran a rebalance which appeared successful (and have
>>>> since cleared up some more space which seems to have mainly been on
>>>> one brick). There were intermittent erroneous "No space..." messages
>>>> last night, but they have become much more frequent today.
>>>>
>>>> Any help would be greatly appreciated.
>>>>
>>>> Thanks
>>>>
>>>> ---------------------------
>>>> [root at mseas-data2 ~]# df -h
>>>> ---------------------------
>>>> Filesystem Size Used Avail Use% Mounted on
>>>> /dev/sdb 164T 164T 324G 100% /mnt/brick2
>>>> /dev/sda 164T 164T 323G 100% /mnt/brick1
>>>> ---------------------------
>>>> [root at mseas-data2 ~]# df -i
>>>> ---------------------------
>>>> Filesystem Inodes IUsed IFree IUse% Mounted on
>>>> /dev/sdb 1375470800 31207165 1344263635 3% /mnt/brick2
>>>> /dev/sda 1384781520 28706614 1356074906 3% /mnt/brick1
>>>>
>>>> ---------------------------
>>>> [root at mseas-data3 ~]# df -h
>>>> ---------------------------
>>>> /dev/sda 91T 91T 323G 100% /export/sda/brick3
>>>> /dev/mapper/vg_Data4-lv_Data4
>>>> 91T 88T 3.4T 97% /export/sdc/brick4
>>>> ---------------------------
>>>> [root at mseas-data3 ~]# df -i
>>>> ---------------------------
>>>> /dev/sda 679323496 9822199 669501297 2%
>>>> /export/sda/brick3
>>>> /dev/mapper/vg_Data4-lv_Data4
>>>> 3906272768 11467484 3894805284 1%
>>>> /export/sdc/brick4
>>>>
>>>>
>>>>
>>>> ---------------------------------------
>>>> [root at mseas-data2 ~]# gluster --version
>>>> ---------------------------------------
>>>> glusterfs 3.7.11 built on Apr 27 2016 14:09:22
>>>> Repository revision: git://git.gluster.com/glusterfs.git
>>>> Copyright (c) 2006-2011 Gluster Inc. <http://www.gluster.com>
>>>> GlusterFS comes with ABSOLUTELY NO WARRANTY.
>>>> You may redistribute copies of GlusterFS under the terms of the GNU
>>>> General Public License.
>>>>
>>>>
>>>>
>>>> -----------------------------------------
>>>> [root at mseas-data2 ~]# gluster volume info
>>>> -----------------------------------------
>>>> Volume Name: data-volume
>>>> Type: Distribute
>>>> Volume ID: c162161e-2a2d-4dac-b015-f31fd89ceb18
>>>> Status: Started
>>>> Number of Bricks: 4
>>>> Transport-type: tcp
>>>> Bricks:
>>>> Brick1: mseas-data2:/mnt/brick1
>>>> Brick2: mseas-data2:/mnt/brick2
>>>> Brick3: mseas-data3:/export/sda/brick3
>>>> Brick4: mseas-data3:/export/sdc/brick4
>>>> Options Reconfigured:
>>>> nfs.export-volumes: off
>>>> nfs.disable: on
>>>> performance.readdir-ahead: on
>>>> diagnostics.brick-sys-log-level: WARNING
>>>> nfs.exports-auth-enable: on
>>>> server.allow-insecure: on
>>>> auth.allow: *
>>>> disperse.eager-lock: off
>>>> performance.open-behind: off
>>>> performance.md-cache-timeout: 60
>>>> network.inode-lru-limit: 50000
>>>> diagnostics.client-log-level: ERROR
>>>>
>>>>
>>>>
>>>> --------------------------------------------------------------
>>>> [root at mseas-data2 ~]# gluster volume status data-volume detail
>>>> --------------------------------------------------------------
>>>> Status of volume: data-volume
>>>>
>>> ------------------------------------------------------------------------------
>>>
>>>
>>>> Brick : Brick mseas-data2:/mnt/brick1
>>>> TCP Port : 49154
>>>> RDMA Port : 0
>>>> Online : Y
>>>> Pid : 4601
>>>> File System : xfs
>>>> Device : /dev/sda
>>>> Mount Options : rw
>>>> Inode Size : 256
>>>> Disk Space Free : 318.8GB
>>>> Total Disk Space : 163.7TB
>>>> Inode Count : 1365878288
>>>> Free Inodes : 1337173596
>>>>
>>> ------------------------------------------------------------------------------
>>>
>>>
>>>> Brick : Brick mseas-data2:/mnt/brick2
>>>> TCP Port : 49155
>>>> RDMA Port : 0
>>>> Online : Y
>>>> Pid : 7949
>>>> File System : xfs
>>>> Device : /dev/sdb
>>>> Mount Options : rw
>>>> Inode Size : 256
>>>> Disk Space Free : 319.8GB
>>>> Total Disk Space : 163.7TB
>>>> Inode Count : 1372421408
>>>> Free Inodes : 1341219039
>>>>
>>> ------------------------------------------------------------------------------
>>>
>>>
>>>> Brick : Brick mseas-data3:/export/sda/brick3
>>>> TCP Port : 49153
>>>> RDMA Port : 0
>>>> Online : Y
>>>> Pid : 4650
>>>> File System : xfs
>>>> Device : /dev/sda
>>>> Mount Options : rw
>>>> Inode Size : 512
>>>> Disk Space Free : 325.3GB
>>>> Total Disk Space : 91.0TB
>>>> Inode Count : 692001992
>>>> Free Inodes : 682188893
>>>>
>>> ------------------------------------------------------------------------------
>>>
>>>
>>>> Brick : Brick mseas-data3:/export/sdc/brick4
>>>> TCP Port : 49154
>>>> RDMA Port : 0
>>>> Online : Y
>>>> Pid : 23772
>>>> File System : xfs
>>>> Device : /dev/mapper/vg_Data4-lv_Data4
>>>> Mount Options : rw
>>>> Inode Size : 256
>>>> Disk Space Free : 3.4TB
>>>> Total Disk Space : 90.9TB
>>>> Inode Count : 3906272768
>>>> Free Inodes : 3894809903
>>>>
>> Hi Pat,
>>
>> What is the output of:
>> gluster volume get data-volume all | grep cluster.min-free
>>
>> 1% of 164 T is 1640G , but in your case you have only 324G which is
>> way lower.
>>
>> Best Regards,
>> Strahil Nikolov
>
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Pat Haley Email: phaley at mit.edu
Center for Ocean Engineering Phone: (617) 253-6824
Dept. of Mechanical Engineering Fax: (617) 253-8125
MIT, Room 5-213 http://web.mit.edu/phaley/www/
77 Massachusetts Avenue
Cambridge, MA 02139-4301
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20200310/c1484ce2/attachment.html>
More information about the Gluster-users
mailing list