[Gluster-users] Geo-replication status always on 'Created'

[Sunny Kumar]

Hey you can start a fresh I think you are not following proper setup steps.

Please follow these steps [1] to create geo-rep session, you can
delete the old one and do a fresh start. Or alternative you can use
this tool[2] to setup geo-rep.


[1]. https://docs.gluster.org/en/latest/Administrator%20Guide/Geo%20Replication/
[2]. http://aravindavk.in/blog/gluster-georep-tools/


/Sunny

On Thu, Mar 21, 2019 at 11:28 AM Maurya M <mauryam at gmail.com> wrote:
>
> Hi Sunil,
>  I did run the on the slave node :
>  /usr/libexec/glusterfs/set_geo_rep_pem_keys.sh azureuser vol_041afbc53746053368a1840607636e97 vol_a5aee81a873c043c99a938adcb5b5781
> getting this message "/home/azureuser/common_secret.pem.pub not present. Please run geo-replication command on master with push-pem option to generate the file"
>
> So went back and created the session again, no change, so manually copied the common_secret.pem.pub to /home/azureuser/ but still the set_geo_rep_pem_keys.sh is looking the pem file in different name :  COMMON_SECRET_PEM_PUB=${master_vol}_${slave_vol}_common_secret.pem.pub , change the name of pem , ran the command again :
>
>  /usr/libexec/glusterfs/set_geo_rep_pem_keys.sh azureuser vol_041afbc53746053368a1840607636e97 vol_a5aee81a873c043c99a938adcb5b5781
> Successfully copied file.
> Command executed successfully.
>
>
> - went back and created the session , start the geo-replication , still seeing the  same error in logs. Any ideas ?
>
> thanks,
> Maurya
>
>
>
> On Wed, Mar 20, 2019 at 11:07 PM Sunny Kumar <sunkumar at redhat.com> wrote:
>>
>> Hi Maurya,
>>
>> I guess you missed last trick to distribute keys in slave node. I see
>> this is non-root geo-rep setup so please try this:
>>
>>
>> Run the following command as root in any one of Slave node.
>>
>> /usr/local/libexec/glusterfs/set_geo_rep_pem_keys.sh  <slave_user>
>> <master_volume> <slave_volume>
>>
>> - Sunny
>>
>> On Wed, Mar 20, 2019 at 10:47 PM Maurya M <mauryam at gmail.com> wrote:
>> >
>> > Hi all,
>> >  Have setup a 3 master nodes - 3 slave nodes (gluster 4.1) for geo-replication, but once have the geo-replication configure the status is always on "Created',
>> > even after have force start the session.
>> >
>> > On close inspect of the logs on the master node seeing this error:
>> >
>> > "E [syncdutils(monitor):801:errlog] Popen: command returned error   cmd=ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret.pem -p 22 azureuser at xxxxx.xxxx..xxx. gluster --xml --remote-host=localhost volume info vol_a5ae34341a873c043c99a938adcb5b5781      error=255"
>> >
>> > Any ideas what is issue?
>> >
>> > thanks,
>> > Maurya
>> >
>> > _______________________________________________
>> > Gluster-users mailing list
>> > Gluster-users at gluster.org
>> > https://lists.gluster.org/mailman/listinfo/gluster-users