[Gluster-users] Fwd: Added bricks with wrong name and now need to remove them without destroying volume.
Jim Kinney
jim.kinney at gmail.com
Thu Feb 28 19:18:32 UTC 2019
Orig file structure to share with gluster is /foo
Volname is testvol
Data exists in foo . You have 2 copies, one on machine a, another on b.
When you create the testvol in gluster, it creates a folder /foo/.glusterfs and writes all gluster metadata there. There's config data written in gluster only space like var.
When users write files into gluster volumes, gluster manages the writes to the actual filesystem in /foo on both a & b. It tracks writes in .glusterfs on both a & b.
If you "un gluster", the user files in /foo on a & b are untouched. The /foo/.glusterfs folder is deleted on a &b.
On February 28, 2019 10:14:05 AM EST, Tami Greene <tmgreene364 at gmail.com> wrote:
>I'm missing some information about how the cluster volume creates the
>metadata allowing it to see and find the data on the bricks. I've been
>told not to write anything to the bricks directly as the glusterfs
>cannot
>create the metadata and therefore the data doesn't exist in the cluster
>world.
>
>So, if I destroy the current gluster volume, leaving the data on the
>hardware RAID volume, correct the names of the new empty bricks,
>recreate
>the cluster volume, import bricks, how does the metadata get created so
>the
>new cluster volume can find and access the data? It seems like I would
>be
>laying the glusterfs on top on hardware and "hiding" the data.
>
>
>
>On Wed, Feb 27, 2019 at 5:08 PM Jim Kinney <jim.kinney at gmail.com>
>wrote:
>
>> It sounds like new bricks were added and they mounted over the top of
>> existing bricks.
>>
>> gluster volume status <volume> detail
>>
>> This will give the data you need to find where the real files are.
>You can
>> look in those to see the data should be intact.
>>
>> Stopping the gluster volume is a good first step. Then as a safe
>guard you
>> can unmount the filesystem that holds the data you want. Now remove
>the
>> gluster volume(s) that are the problem - all if needed. Remount the
>real
>> filesystem(s). Create new gluster volumes with correct names.
>>
>> On Wed, 2019-02-27 at 16:56 -0500, Tami Greene wrote:
>>
>> That makes sense. System is made of four data arrays with a hardware
>RAID
>> 6 and then the distributed volume on top. I honestly don't know how
>that
>> works, but the previous administrator said we had redundancy. I'm
>hoping
>> there is a way to bypass the safeguard of migrating data when
>removing a
>> brick from the volume, which in my beginner's mind, would be a
>> straight-forward way of remedying the problem. Hopefully once the
>empty
>> bricks are removed, the "missing" data will be visible again in the
>volume.
>>
>> On Wed, Feb 27, 2019 at 3:59 PM Jim Kinney <jim.kinney at gmail.com>
>wrote:
>>
>> Keep in mind that gluster is a metadata process. It doesn't really
>touch
>> the actual volume files. The exception is the .glusterfs and
>.trashcan
>> folders in the very top directory of the gluster volume.
>>
>> When you create a gluster volume from brick, it doesn't format the
>> filesystem. It uses what's already there.
>>
>> So if you remove a volume and all it's bricks, you've not deleted
>data.
>>
>> That said, if you are using anything but replicated bricks, which is
>what
>> I use exclusively for my needs, then reassembling them into a new
>volume
>> with correct name might be tricky. By listing the bricks in the exact
>same
>> order as they were listed when creating the wrong name volume when
>making
>> the correct named volume, it should use the same method to put data
>on the
>> drives as previously and not scramble anything.
>>
>> On Wed, 2019-02-27 at 14:24 -0500, Tami Greene wrote:
>>
>> I sent this and realized I hadn't registered. My apologies for the
>> duplication
>>
>> Subject: Added bricks with wrong name and now need to remove them
>without
>> destroying volume.
>> To: <gluster-users at gluster.org>
>>
>>
>>
>> Yes, I broke it. Now I need help fixing it.
>>
>>
>>
>> I have an existing Gluster Volume, spread over 16 bricks and 4
>servers;
>> 1.5P space with 49% currently used . Added an additional 4 bricks
>and
>> server as we expect large influx of data in the next 4 to 6 months.
>The
>> system had been established by my predecessor, who is no longer here.
>>
>>
>>
>> First solo addition of bricks to gluster.
>>
>>
>>
>> Everything went smoothly until “gluster volume add-brick Volume
>> newserver:/bricks/dataX/vol.name"
>>
>> (I don’t have the exact response as I worked on this
>for
>> almost 5 hours last night) Unable to add-brick as “it is already
>mounted”
>> or something to that affect.
>>
>> Double checked my instructions, the name of the
>bricks.
>> Everything seemed correct. Tried to add again adding “force.”
>Again,
>> “unable to add-brick”
>>
>> Because of the keyword (in my mind) “mounted” in the
>> error, I checked /etc/fstab, where the name of the mount point is
>simply
>> /bricks/dataX.
>>
>> This convention was the same across all servers, so I thought I had
>> discovered an error in my notes and changed the name to
>> newserver:/bricks/dataX.
>>
>> Still had to use force, but the bricks were added.
>>
>> Restarted the gluster volume vol.name. No errors.
>>
>> Rebooted; but /vol.name did not mount on reboot as the /etc/fstab
>> instructs. So I attempted to mount manually and discovered a had a
>big mess
>> on my hands.
>>
>> “Transport endpoint not connected” in
>> addition to other messages.
>>
>> Discovered an issue between certificates and the
>> auth.ssl-allow list because of the hostname of new server. I made
>> correction and /vol.name mounted.
>>
>> However, df -h indicated the 4 new bricks were not
>being
>> seen as 400T were missing from what should have been available.
>>
>>
>>
>> Thankfully, I could add something to vol.name on one machine and see
>it
>> on another machine and I wrongly assumed the volume was operational,
>even
>> if the new bricks were not recognized.
>>
>> So I tried to correct the main issue by,
>>
>> gluster volume remove vol.name
>newserver/bricks/dataX/
>>
>> received prompt, data will be migrated before brick
>is
>> removed continue (or something to that) and I started the process,
>think
>> this won’t take long because there is no data.
>>
>> After 10 minutes and no apparent progress on the
>process,
>> I did panic, thinking worse case scenario – it is writing zeros over
>my
>> data.
>>
>> Executed the stop command and there was still no
>progress,
>> and I assume it was due to no data on the brick to be remove causing
>the
>> program to hang.
>>
>> Found the process ID and killed it.
>>
>>
>> This morning, while all clients and servers can access /vol.name; not
>all
>> of the data is present. I can find it under cluster, but users
>cannot
>> reach it. I am, again, assume it is because of the 4 bricks that
>have been
>> added, but aren't really a part of the volume because of their
>incorrect
>> name.
>>
>>
>>
>> So – how do I proceed from here.
>>
>>
>> 1. Remove the 4 empty bricks from the volume without damaging data.
>>
>> 2. Correctly clear any metadata about these 4 bricks ONLY so they may
>be
>> added correctly.
>>
>>
>> If this doesn't restore the volume to full functionality, I'll write
>> another post if I cannot find answer in the notes or on line.
>>
>>
>> Tami--
>>
>>
>> _______________________________________________
>>
>> Gluster-users mailing list
>>
>> Gluster-users at gluster.org
>>
>>
>> https://lists.gluster.org/mailman/listinfo/gluster-users
>>
>> --
>>
>>
>> James P. Kinney III
>>
>>
>> Every time you stop a school, you will have to build a jail. What you
>>
>> gain at one end you lose at the other. It's like feeding a dog on his
>>
>> own tail. It won't fatten the dog.
>>
>> - Speech 11/23/1900 Mark Twain
>>
>>
>> http://heretothereideas.blogspot.com/
>>
>>
>>
>>
>> --
>>
>> James P. Kinney III Every time you stop a school, you will have to
>build a
>> jail. What you gain at one end you lose at the other. It's like
>feeding a
>> dog on his own tail. It won't fatten the dog. - Speech 11/23/1900
>Mark
>> Twain http://heretothereideas.blogspot.com/
>>
>>
>
>--
>Tami
--
Sent from my Android device with K-9 Mail. All tyopes are thumb related and reflect authenticity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20190228/fd5fbe7f/attachment.html>
More information about the Gluster-users
mailing list