[Gluster-users] Replica 3 - how to replace failed node (peer)

[David Spisla]

Hello Martin,

look here:
https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.4/pdf/administration_guide/Red_Hat_Gluster_Storage-3.4-Administration_Guide-en-US.pdf
on page 324. There is a manual how to replace a brick in case of a hardware
failure

Regards
David Spisla

Am Mi., 10. Apr. 2019 um 11:42 Uhr schrieb Martin Toth <snowmailer at gmail.com
>:

> Hi all,
>
> I am running replica 3 gluster with 3 bricks. One of my servers failed -
> all disks are showing errors and raid is in fault state.
>
> Type: Replicate
> Volume ID: 41d5c283-3a74-4af8-a55d-924447bfa59a
> Status: Started
> Number of Bricks: 1 x 3 = 3
> Transport-type: tcp
> Bricks:
> Brick1: node1.san:/tank/gluster/gv0imagestore/brick1
> Brick2: node2.san:/tank/gluster/gv0imagestore/brick1 <— this brick is down
> Brick3: node3.san:/tank/gluster/gv0imagestore/brick1
>
> So one of my bricks is totally failed (node2). It went down and all data
> are lost (failed raid on node2). Now I am running only two bricks on 2
> servers out from 3.
> This is really critical problem for us, we can lost all data. I want to
> add new disks to node2, create new raid array on them and try to replace
> failed brick on this node.
>
> What is the procedure of replacing Brick2 on node2, can someone advice? I
> can’t find anything relevant in documentation.
>
> Thanks in advance,
> Martin
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> https://lists.gluster.org/mailman/listinfo/gluster-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20190410/718e869f/attachment.html>