[Gluster-users] Failures during rebalance on gluster distributed disperse volume

Nithya Balachandran nbalacha at redhat.com
Fri Sep 14 14:59:40 UTC 2018


Hi Mauro,


The rebalance code started using fallocate in 3.10.5 (
https://bugzilla.redhat.com/show_bug.cgi?id=1473132) which works fine on
replicated volumes. However, we neglected to test this with EC volumes on
3.10. Once we discovered the issue, the EC fallocate implementation was
made available in 3.11.

At this point, I'm afraid the only option I see is to upgrade to at least
3.12.

@Sunil, do you have anything to add?

Regards,
Nithya

On 13 September 2018 at 18:34, Mauro Tridici <mauro.tridici at cmcc.it> wrote:

>
> Hi Nithya,
>
> thank you for involving EC group.
> I will wait for your suggestions.
>
> Regards,
> Mauro
>
> Il giorno 13 set 2018, alle ore 13:38, Nithya Balachandran <
> nbalacha at redhat.com> ha scritto:
>
> This looks like an issue because rebalance switched to using fallocate
> which EC did not have implemented at that point.
>
> @Pranith, @Ashish, which version of gluster had support for fallocate in
> EC?
>
>
> Regards,
> Nithya
>
> On 12 September 2018 at 19:24, Mauro Tridici <mauro.tridici at cmcc.it>
> wrote:
>
>> Dear All,
>>
>> I recently added 3 servers (each one with 12 bricks) to an existing
>> Gluster Distributed Disperse Volume.
>> Volume extension has been completed without error and I already executed
>> the rebalance procedure with fix-layout option with no problem.
>> I just launched the rebalance procedure without fix-layout option, but,
>> as you can see in the output below, I noticed that some failures have been
>> detected.
>>
>> [root at s01 glusterfs]# gluster v rebalance tier2 status
>>                                     Node Rebalanced-files          size
>>     scanned      failures       skipped               status  run time in
>> h:m:s
>>                                ---------      -----------   -----------
>> -----------   -----------   -----------         ------------
>> --------------
>>                                localhost            71176         3.2MB
>>     2137557       1530391          8128          in progress       13:59:05
>>                                  s02-stg                0        0Bytes
>>           0             0             0            completed       11:53:28
>>                                  s03-stg                0        0Bytes
>>           0             0             0            completed       11:53:32
>>                                  s04-stg                0        0Bytes
>>           0             0             0            completed        0:00:06
>>                                  s05-stg               15        0Bytes
>>       17055             0            18            completed       10:48:01
>>                                  s06-stg                0        0Bytes
>>           0             0             0            completed        0:00:06
>> Estimated time left for rebalance to complete :        0:46:53
>> volume rebalance: tier2: success
>>
>> In the volume rebalance log file, I detected a lot of error messages
>> similar to the following ones:
>>
>> [2018-09-12 13:15:50.756703] E [MSGID: 0] [dht-rebalance.c:1696:dht_migrate_file]
>> 0-tier2-dht: Create dst failed on - tier2-disperse-6 for file -
>> /CSP/sp1/CESM/archive/sps_200508_003/atm/hist/postproc/sps_
>> 200508_003.cam.h0.2005-12_grid.nc
>> [2018-09-12 13:15:50.757025] E [MSGID: 109023]
>> [dht-rebalance.c:2733:gf_defrag_migrate_single_file] 0-tier2-dht:
>> migrate-data failed for /CSP/sp1/CESM/archive/sps_2005
>> 08_003/atm/hist/postproc/sps_200508_003.cam.h0.2005-12_grid.nc
>> [2018-09-12 13:15:50.759183] E [MSGID: 109023]
>> [dht-rebalance.c:844:__dht_rebalance_create_dst_file] 0-tier2-dht:
>> fallocate failed for /CSP/sp1/CESM/archive/sps_2005
>> 08_003/atm/hist/postproc/sps_200508_003.cam.h0.2005-09_grid.nc on
>> tier2-disperse-9 (Operation not supported)
>> [2018-09-12 13:15:50.759206] E [MSGID: 0] [dht-rebalance.c:1696:dht_migrate_file]
>> 0-tier2-dht: Create dst failed on - tier2-disperse-9 for file -
>> /CSP/sp1/CESM/archive/sps_200508_003/atm/hist/postproc/sps_
>> 200508_003.cam.h0.2005-09_grid.nc
>> [2018-09-12 13:15:50.759536] E [MSGID: 109023]
>> [dht-rebalance.c:2733:gf_defrag_migrate_single_file] 0-tier2-dht:
>> migrate-data failed for /CSP/sp1/CESM/archive/sps_2005
>> 08_003/atm/hist/postproc/sps_200508_003.cam.h0.2005-09_grid.nc
>> [2018-09-12 13:15:50.777219] E [MSGID: 109023]
>> [dht-rebalance.c:844:__dht_rebalance_create_dst_file] 0-tier2-dht:
>> fallocate failed for /CSP/sp1/CESM/archive/sps_2005
>> 08_003/atm/hist/postproc/sps_200508_003.cam.h0.2006-01_grid.nc on
>> tier2-disperse-10 (Operation not supported)
>> [2018-09-12 13:15:50.777241] E [MSGID: 0] [dht-rebalance.c:1696:dht_migrate_file]
>> 0-tier2-dht: Create dst failed on - tier2-disperse-10 for file -
>> /CSP/sp1/CESM/archive/sps_200508_003/atm/hist/postproc/sps_
>> 200508_003.cam.h0.2006-01_grid.nc
>> [2018-09-12 13:15:50.777676] E [MSGID: 109023]
>> [dht-rebalance.c:2733:gf_defrag_migrate_single_file] 0-tier2-dht:
>> migrate-data failed for /CSP/sp1/CESM/archive/sps_2005
>> 08_003/atm/hist/postproc/sps_200508_003.cam.h0.2006-01_grid.nc
>>
>> Could you please help me to understand what is happening and how to solve
>> it?
>>
>> Our Gluster implementation is based on Gluster v.3.10.5
>>
>> Thank you in advance,
>> Mauro
>>
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> https://lists.gluster.org/mailman/listinfo/gluster-users
>>
>
>
>
> -------------------------
> Mauro Tridici
>
> Fondazione CMCC
> CMCC Supercomputing Center
> presso Complesso Ecotekne - Università del Salento -
> Strada Prov.le Lecce - Monteroni sn
> 73100 Lecce  IT
> http://www.cmcc.it
>
> mobile: (+39) 327 5630841
> email: mauro.tridici at cmcc.it
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20180914/b76eb9d5/attachment.html>


More information about the Gluster-users mailing list