[Gluster-users] [ovirt-users] Re: Gluster problems, cluster performance issues
Krutika Dhananjay
kdhananj at redhat.com
Wed May 30 09:44:42 UTC 2018
The profile seems to suggest very high latencies on the brick at
ovirt1.nwfiber.com:/gluster/brick1/engine
ovirt2.* shows decent numbers. Is everything OK with the brick on ovirt1?
Are the bricks of engine volume on both these servers identical in terms of
their config?
-Krutika
On Wed, May 30, 2018 at 3:07 PM, Jim Kusznir <jim at palousetech.com> wrote:
> Hi:
>
> Thank you. I was finally able to get my cluster minimally functional
> again (its 2am local here; had to be up by 6am). I set the
> cluster.eager-lock off, but I'm still seeing performance issues. Here's
> the engine volume:
>
> Brick: ovirt1.nwfiber.com:/gluster/brick1/engine
> ------------------------------------------------
> Cumulative Stats:
> Block Size: 256b+ 512b+
> 4096b+
> No. of Reads: 702 24
> 772
> No. of Writes: 0 939
> 4802
>
> Block Size: 8192b+ 16384b+
> 32768b+
> No. of Reads: 0 51
> 49
> No. of Writes: 4211 858
> 291
>
> Block Size: 65536b+ 131072b+
> No. of Reads: 49 5232
> No. of Writes: 333 588
> %-latency Avg-latency Min-Latency Max-Latency No. of calls
> Fop
> --------- ----------- ----------- ----------- ------------
> ----
> 0.00 0.00 us 0.00 us 0.00 us 3
> FORGET
> 0.00 0.00 us 0.00 us 0.00 us 1227
> RELEASE
> 0.00 0.00 us 0.00 us 0.00 us 1035
> RELEASEDIR
> 0.00 827.00 us 619.00 us 1199.00 us 10
> READDIRP
> 0.00 98.38 us 30.00 us 535.00 us 144
> ENTRYLK
> 0.00 180.11 us 121.00 us 257.00 us 94
> REMOVEXATTR
> 0.00 208.03 us 23.00 us 1980.00 us 182
> GETXATTR
> 0.00 1212.71 us 35.00 us 29459.00 us 38
> READDIR
> 0.01 260.39 us 172.00 us 552.00 us 376
> XATTROP
> 0.01 305.10 us 45.00 us 144983.00 us 727
> STATFS
> 0.03 1267.23 us 22.00 us 418399.00 us 451
> FLUSH
> 0.04 1164.14 us 86.00 us 437638.00 us 600
> OPEN
> 0.07 2253.75 us 3.00 us 645037.00 us 598
> OPENDIR
> 0.08 17360.97 us 149.00 us 962156.00 us 94
> SETATTR
> 0.12 2733.36 us 50.00 us 1683945.00 us 877
> FSTAT
> 0.21 3041.55 us 29.00 us 1021732.00 us 1368
> INODELK
> 0.24 389.93 us 107.00 us 550203.00 us 11840
> FXATTROP
> 0.34 14820.49 us 38.00 us 1935527.00 us 444
> STAT
> 0.88 3765.77 us 42.00 us 1341978.00 us 4581
> LOOKUP
> 15.06 19624.04 us 26.00 us 6412511.00 us 14971
> FINODELK
> 21.63 59817.26 us 45.00 us 4008832.00 us 7054
> FSYNC
> 23.19 263941.14 us 86.00 us 4130892.00 us 1714
> READ
> 38.10 125578.64 us 207.00 us 7682338.00 us 5919
> WRITE
>
> Duration: 6957 seconds
> Data Read: 694832857 bytes
> Data Written: 192751104 bytes
>
> Interval 0 Stats:
> Block Size: 256b+ 512b+
> 4096b+
> No. of Reads: 702 24
> 772
> No. of Writes: 0 939
> 4802
>
> Block Size: 8192b+ 16384b+
> 32768b+
> No. of Reads: 0 51
> 49
> No. of Writes: 4211 858
> 291
>
> Block Size: 65536b+ 131072b+
> No. of Reads: 49 5232
> No. of Writes: 333 588
> %-latency Avg-latency Min-Latency Max-Latency No. of calls
> Fop
> --------- ----------- ----------- ----------- ------------
> ----
> 0.00 0.00 us 0.00 us 0.00 us 3
> FORGET
> 0.00 0.00 us 0.00 us 0.00 us 1227
> RELEASE
> 0.00 0.00 us 0.00 us 0.00 us 1035
> RELEASEDIR
> 0.00 827.00 us 619.00 us 1199.00 us 10
> READDIRP
> 0.00 98.38 us 30.00 us 535.00 us 144
> ENTRYLK
> 0.00 180.11 us 121.00 us 257.00 us 94
> REMOVEXATTR
> 0.00 208.03 us 23.00 us 1980.00 us 182
> GETXATTR
> 0.00 1212.71 us 35.00 us 29459.00 us 38
> READDIR
> 0.01 260.39 us 172.00 us 552.00 us 376
> XATTROP
> 0.01 305.10 us 45.00 us 144983.00 us 727
> STATFS
> 0.03 1267.23 us 22.00 us 418399.00 us 451
> FLUSH
> 0.04 1164.14 us 86.00 us 437638.00 us 600
> OPEN
> 0.07 2253.75 us 3.00 us 645037.00 us 598
> OPENDIR
> 0.08 17360.97 us 149.00 us 962156.00 us 94
> SETATTR
> 0.12 2733.36 us 50.00 us 1683945.00 us 877
> FSTAT
> 0.21 3041.55 us 29.00 us 1021732.00 us 1368
> INODELK
> 0.24 389.93 us 107.00 us 550203.00 us 11840
> FXATTROP
> 0.34 14820.49 us 38.00 us 1935527.00 us 444
> STAT
> 0.91 3859.75 us 42.00 us 1341978.00 us 4581
> LOOKUP
> 15.05 19622.80 us 26.00 us 6412511.00 us 14971
> FINODELK
> 21.62 59809.04 us 45.00 us 4008832.00 us 7054
> FSYNC
> 23.18 263941.14 us 86.00 us 4130892.00 us 1714
> READ
> 38.09 125562.74 us 207.00 us 7682338.00 us 5919
> WRITE
>
> Duration: 6957 seconds
> Data Read: 694832857 bytes
> Data Written: 192751104 bytes
>
> Brick: ovirt2.nwfiber.com:/gluster/brick1/engine
> ------------------------------------------------
> Cumulative Stats:
> Block Size: 256b+ 512b+
> 1024b+
> No. of Reads: 704 167
> 216
> No. of Writes: 0 939
> 0
>
> Block Size: 2048b+ 4096b+
> 8192b+
> No. of Reads: 424 34918
> 9866
> No. of Writes: 0 4802
> 4211
>
> Block Size: 16384b+ 32768b+
> 65536b+
> No. of Reads: 12695 3290
> 3880
> No. of Writes: 858 291
> 333
>
> Block Size: 131072b+
> No. of Reads: 13718
> No. of Writes: 596
> %-latency Avg-latency Min-Latency Max-Latency No. of calls
> Fop
> --------- ----------- ----------- ----------- ------------
> ----
> 0.00 0.00 us 0.00 us 0.00 us 3
> FORGET
> 0.00 0.00 us 0.00 us 0.00 us 1228
> RELEASE
> 0.00 0.00 us 0.00 us 0.00 us 1041
> RELEASEDIR
> 0.06 74.26 us 21.00 us 915.00 us 144
> ENTRYLK
> 0.07 141.97 us 87.00 us 268.00 us 94
> REMOVEXATTR
> 0.08 370.68 us 22.00 us 1311.00 us 38
> READDIR
> 0.09 184.88 us 108.00 us 316.00 us 94
> SETATTR
> 0.14 56.41 us 21.00 us 540.00 us 451
> FLUSH
> 0.14 139.42 us 18.00 us 3251.00 us 184
> GETXATTR
> 0.31 96.06 us 2.00 us 2293.00 us 598
> OPENDIR
> 0.35 88.76 us 31.00 us 716.00 us 727
> STATFS
> 0.43 131.96 us 59.00 us 784.00 us 600
> OPEN
> 0.44 214.77 us 110.00 us 851.00 us 376
> XATTROP
> 0.44 81.02 us 21.00 us 3029.00 us 998
> STAT
> 0.51 68.57 us 17.00 us 3039.00 us 1368
> INODELK
> 1.26 429.06 us 274.00 us 988.00 us 539
> READDIRP
> 1.89 109.48 us 38.00 us 2492.00 us 3175
> FSTAT
> 5.09 62.48 us 19.00 us 4578.00 us 14967
> FINODELK
> 5.72 229.43 us 32.00 us 979.00 us 4581
> LOOKUP
> 11.48 356.40 us 144.00 us 16222.00 us 5917
> WRITE
> 12.40 192.55 us 87.00 us 4372.00 us 11834
> FXATTROP
> 12.48 325.11 us 33.00 us 10702.00 us 7051
> FSYNC
> 46.61 2063.11 us 131.00 us 193833.00 us 4151
> READ
>
> Duration: 6958 seconds
> Data Read: 2782908225 bytes
> Data Written: 193799680 bytes
>
> Interval 0 Stats:
> Block Size: 256b+ 512b+
> 1024b+
> No. of Reads: 704 167
> 216
> No. of Writes: 0 939
> 0
>
> Block Size: 2048b+ 4096b+
> 8192b+
> No. of Reads: 424 34918
> 9866
> No. of Writes: 0 4802
> 4211
>
> Block Size: 16384b+ 32768b+
> 65536b+
> No. of Reads: 12695 3290
> 3880
> No. of Writes: 858 291
> 333
>
> Block Size: 131072b+
> No. of Reads: 13718
> No. of Writes: 596
> %-latency Avg-latency Min-Latency Max-Latency No. of calls
> Fop
> --------- ----------- ----------- ----------- ------------
> ----
> 0.00 0.00 us 0.00 us 0.00 us 3
> FORGET
> 0.00 0.00 us 0.00 us 0.00 us 1228
> RELEASE
> 0.00 0.00 us 0.00 us 0.00 us 1041
> RELEASEDIR
> 0.06 74.26 us 21.00 us 915.00 us 144
> ENTRYLK
> 0.07 141.97 us 87.00 us 268.00 us 94
> REMOVEXATTR
> 0.08 370.68 us 22.00 us 1311.00 us 38
> READDIR
> 0.09 184.88 us 108.00 us 316.00 us 94
> SETATTR
> 0.14 56.41 us 21.00 us 540.00 us 451
> FLUSH
> 0.14 139.42 us 18.00 us 3251.00 us 184
> GETXATTR
> 0.31 96.06 us 2.00 us 2293.00 us 598
> OPENDIR
> 0.35 88.76 us 31.00 us 716.00 us 727
> STATFS
> 0.43 131.96 us 59.00 us 784.00 us 600
> OPEN
> 0.44 214.77 us 110.00 us 851.00 us 376
> XATTROP
> 0.44 81.02 us 21.00 us 3029.00 us 998
> STAT
> 0.51 68.57 us 17.00 us 3039.00 us 1368
> INODELK
> 1.26 429.06 us 274.00 us 988.00 us 539
> READDIRP
> 1.89 109.51 us 38.00 us 2492.00 us 3175
> FSTAT
> 5.09 62.48 us 19.00 us 4578.00 us 14967
> FINODELK
> 5.72 229.43 us 32.00 us 979.00 us 4581
> LOOKUP
> 11.48 356.40 us 144.00 us 16222.00 us 5917
> WRITE
> 12.40 192.55 us 87.00 us 4372.00 us 11834
> FXATTROP
> 12.48 325.11 us 33.00 us 10702.00 us 7051
> FSYNC
> 46.62 2063.91 us 131.00 us 193833.00 us 4151
> READ
>
> Duration: 6958 seconds
> Data Read: 2782908225 bytes
> Data Written: 193799680 bytes
>
>
>
> gluster> volume info engine
>
> Volume Name: engine
> Type: Replicate
> Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de
> Status: Started
> Snapshot Count: 0
> Number of Bricks: 1 x (2 + 1) = 3
> Transport-type: tcp
> Bricks:
> Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine
> Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine
> Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter)
> Options Reconfigured:
> diagnostics.count-fop-hits: on
> diagnostics.latency-measurement: on
> performance.strict-o-direct: on
> nfs.disable: on
> user.cifs: off
> network.ping-timeout: 30
> cluster.shd-max-threads: 6
> cluster.shd-wait-qlength: 10000
> cluster.locking-scheme: granular
> cluster.data-self-heal-algorithm: full
> performance.low-prio-threads: 32
> features.shard-block-size: 512MB
> features.shard: on
> storage.owner-gid: 36
> storage.owner-uid: 36
> cluster.server-quorum-type: server
> cluster.quorum-type: auto
> network.remote-dio: off
> cluster.eager-lock: off
> performance.stat-prefetch: off
> performance.io-cache: off
> performance.read-ahead: off
> performance.quick-read: off
> performance.readdir-ahead: on
> geo-replication.indexing: on
> geo-replication.ignore-pid-check: on
> changelog.changelog: on
>
>
> On Tue, May 29, 2018 at 9:17 PM, Krutika Dhananjay <kdhananj at redhat.com>
> wrote:
>
>> Adding Ravi to look into the heal issue.
>>
>> As for the fsync hang and subsequent IO errors, it seems a lot like
>> https://bugzilla.redhat.com/show_bug.cgi?id=1497156 and Paolo Bonzini
>> from qemu had pointed out that this would be fixed by the following commit:
>>
>> commit e72c9a2a67a6400c8ef3d01d4c461dbbbfa0e1f0
>> Author: Paolo Bonzini <pbonzini at redhat.com>
>> Date: Wed Jun 21 16:35:46 2017 +0200
>>
>> scsi: virtio_scsi: let host do exception handling
>>
>> virtio_scsi tries to do exception handling after the default 30 seconds
>> timeout expires. However, it's better to let the host control the
>> timeout, otherwise with a heavy I/O load it is likely that an abort will
>> also timeout. This leads to fatal errors like filesystems going
>> offline.
>>
>> Disable the 'sd' timeout and allow the host to do exception handling,
>> following the precedent of the storvsc driver.
>>
>> Hannes has a proposal to introduce timeouts in virtio, but this provides
>> an immediate solution for stable kernels too.
>>
>> [mkp: fixed typo]
>>
>> Reported-by: Douglas Miller <dougmill at linux.vnet.ibm.com>
>> Cc: "James E.J. Bottomley" <jejb at linux.vnet.ibm.com>
>> Cc: "Martin K. Petersen" <martin.petersen at oracle.com>
>> Cc: Hannes Reinecke <hare at suse.de>
>> Cc: linux-scsi at vger.kernel.org
>> Cc: stable at vger.kernel.org
>> Signed-off-by: Paolo Bonzini <pbonzini at redhat.com>
>> Signed-off-by: Martin K. Petersen <martin.petersen at oracle.com>
>>
>>
>> Adding Paolo/Kevin to comment.
>>
>> As for the poor gluster performance, could you disable cluster.eager-lock
>> and see if that makes any difference:
>>
>> # gluster volume set <VOL> cluster.eager-lock off
>>
>> Do also capture the volume profile again if you still see performance
>> issues after disabling eager-lock.
>>
>> -Krutika
>>
>>
>> On Wed, May 30, 2018 at 6:55 AM, Jim Kusznir <jim at palousetech.com> wrote:
>>
>>> I also finally found the following in my system log on one server:
>>>
>>> [10679.524491] INFO: task glusterclogro:14933 blocked for more than 120
>>> seconds.
>>> [10679.525826] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> disables this message.
>>> [10679.527144] glusterclogro D ffff97209832bf40 0 14933 1
>>> 0x00000080
>>> [10679.527150] Call Trace:
>>> [10679.527161] [<ffffffffb9913f79>] schedule+0x29/0x70
>>> [10679.527218] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs]
>>> [10679.527225] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20
>>> [10679.527254] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs]
>>> [10679.527260] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0
>>> [10679.527268] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/
>>> 0x160
>>> [10679.527271] [<ffffffffb944f3d0>] SyS_fsync+0x10/0x20
>>> [10679.527275] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21
>>> [10679.527279] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [10679.527283] INFO: task glusterposixfsy:14941 blocked for more than
>>> 120 seconds.
>>> [10679.528608] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> disables this message.
>>> [10679.529956] glusterposixfsy D ffff972495f84f10 0 14941 1
>>> 0x00000080
>>> [10679.529961] Call Trace:
>>> [10679.529966] [<ffffffffb9913f79>] schedule+0x29/0x70
>>> [10679.530003] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs]
>>> [10679.530008] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20
>>> [10679.530038] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs]
>>> [10679.530042] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0
>>> [10679.530046] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/
>>> 0x160
>>> [10679.530050] [<ffffffffb944f3f3>] SyS_fdatasync+0x13/0x20
>>> [10679.530054] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21
>>> [10679.530058] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [10679.530062] INFO: task glusteriotwr13:15486 blocked for more than 120
>>> seconds.
>>> [10679.531805] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> disables this message.
>>> [10679.533732] glusteriotwr13 D ffff9720a83f0000 0 15486 1
>>> 0x00000080
>>> [10679.533738] Call Trace:
>>> [10679.533747] [<ffffffffb9913f79>] schedule+0x29/0x70
>>> [10679.533799] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs]
>>> [10679.533806] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20
>>> [10679.533846] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs]
>>> [10679.533852] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0
>>> [10679.533858] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/
>>> 0x160
>>> [10679.533863] [<ffffffffb944f3f3>] SyS_fdatasync+0x13/0x20
>>> [10679.533868] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21
>>> [10679.533873] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [10919.512757] INFO: task glusterclogro:14933 blocked for more than 120
>>> seconds.
>>> [10919.514714] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> disables this message.
>>> [10919.516663] glusterclogro D ffff97209832bf40 0 14933 1
>>> 0x00000080
>>> [10919.516677] Call Trace:
>>> [10919.516690] [<ffffffffb9913f79>] schedule+0x29/0x70
>>> [10919.516696] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0
>>> [10919.516703] [<ffffffffb951cc04>] ? blk_finish_plug+0x14/0x40
>>> [10919.516768] [<ffffffffc05e9224>] ? _xfs_buf_ioapply+0x334/0x460 [xfs]
>>> [10919.516774] [<ffffffffb991432d>] wait_for_completion+0xfd/0x140
>>> [10919.516782] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20
>>> [10919.516821] [<ffffffffc05eb0a3>] ? _xfs_buf_read+0x23/0x40 [xfs]
>>> [10919.516859] [<ffffffffc05eafa9>] xfs_buf_submit_wait+0xf9/0x1d0 [xfs]
>>> [10919.516902] [<ffffffffc061b279>] ? xfs_trans_read_buf_map+0x199/0x400
>>> [xfs]
>>> [10919.516940] [<ffffffffc05eb0a3>] _xfs_buf_read+0x23/0x40 [xfs]
>>> [10919.516977] [<ffffffffc05eb1b9>] xfs_buf_read_map+0xf9/0x160 [xfs]
>>> [10919.517022] [<ffffffffc061b279>] xfs_trans_read_buf_map+0x199/0x400
>>> [xfs]
>>> [10919.517057] [<ffffffffc05c8d04>] xfs_da_read_buf+0xd4/0x100 [xfs]
>>> [10919.517091] [<ffffffffc05c8d53>] xfs_da3_node_read+0x23/0xd0 [xfs]
>>> [10919.517126] [<ffffffffc05c9fee>] xfs_da3_node_lookup_int+0x6e/0x2f0
>>> [xfs]
>>> [10919.517160] [<ffffffffc05d5a1d>] xfs_dir2_node_lookup+0x4d/0x170
>>> [xfs]
>>> [10919.517194] [<ffffffffc05ccf5d>] xfs_dir_lookup+0x1bd/0x1e0 [xfs]
>>> [10919.517233] [<ffffffffc05fd8d9>] xfs_lookup+0x69/0x140 [xfs]
>>> [10919.517271] [<ffffffffc05fa018>] xfs_vn_lookup+0x78/0xc0 [xfs]
>>> [10919.517278] [<ffffffffb9425cf3>] lookup_real+0x23/0x60
>>> [10919.517283] [<ffffffffb9426702>] __lookup_hash+0x42/0x60
>>> [10919.517288] [<ffffffffb942d519>] SYSC_renameat2+0x3a9/0x5a0
>>> [10919.517296] [<ffffffffb94d3753>] ? selinux_file_free_security+0x2
>>> 3/0x30
>>> [10919.517304] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [10919.517309] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/
>>> 0x160
>>> [10919.517313] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [10919.517318] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/
>>> 0x160
>>> [10919.517323] [<ffffffffb942e58e>] SyS_renameat2+0xe/0x10
>>> [10919.517328] [<ffffffffb942e5ce>] SyS_rename+0x1e/0x20
>>> [10919.517333] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21
>>> [10919.517339] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [11159.496095] INFO: task glusteriotwr9:15482 blocked for more than 120
>>> seconds.
>>> [11159.497546] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> disables this message.
>>> [11159.498978] glusteriotwr9 D ffff971fa0fa1fa0 0 15482 1
>>> 0x00000080
>>> [11159.498984] Call Trace:
>>> [11159.498995] [<ffffffffb9911f00>] ? bit_wait+0x50/0x50
>>> [11159.498999] [<ffffffffb9913f79>] schedule+0x29/0x70
>>> [11159.499003] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0
>>> [11159.499056] [<ffffffffc05dd9b7>] ? xfs_iext_bno_to_ext+0xa7/0x1a0
>>> [xfs]
>>> [11159.499082] [<ffffffffc05dd43e>] ? xfs_iext_bno_to_irec+0x8e/0xd0
>>> [xfs]
>>> [11159.499090] [<ffffffffb92f7a12>] ? ktime_get_ts64+0x52/0xf0
>>> [11159.499093] [<ffffffffb9911f00>] ? bit_wait+0x50/0x50
>>> [11159.499097] [<ffffffffb991348d>] io_schedule_timeout+0xad/0x130
>>> [11159.499101] [<ffffffffb9913528>] io_schedule+0x18/0x20
>>> [11159.499104] [<ffffffffb9911f11>] bit_wait_io+0x11/0x50
>>> [11159.499107] [<ffffffffb9911ac1>] __wait_on_bit_lock+0x61/0xc0
>>> [11159.499113] [<ffffffffb9393634>] __lock_page+0x74/0x90
>>> [11159.499118] [<ffffffffb92bc210>] ? wake_bit_function+0x40/0x40
>>> [11159.499121] [<ffffffffb9394154>] __find_lock_page+0x54/0x70
>>> [11159.499125] [<ffffffffb9394e85>] grab_cache_page_write_begin+0x
>>> 55/0xc0
>>> [11159.499130] [<ffffffffb9484b76>] iomap_write_begin+0x66/0x100
>>> [11159.499135] [<ffffffffb9484edf>] iomap_write_actor+0xcf/0x1d0
>>> [11159.499140] [<ffffffffb9484e10>] ? iomap_write_end+0x80/0x80
>>> [11159.499144] [<ffffffffb94854e7>] iomap_apply+0xb7/0x150
>>> [11159.499149] [<ffffffffb9485621>] iomap_file_buffered_write+0xa1/0xe0
>>> [11159.499153] [<ffffffffb9484e10>] ? iomap_write_end+0x80/0x80
>>> [11159.499182] [<ffffffffc05f025d>] xfs_file_buffered_aio_write+0x12d/0x2c0
>>> [xfs]
>>> [11159.499213] [<ffffffffc05f057d>] xfs_file_aio_write+0x18d/0x1b0 [xfs]
>>> [11159.499217] [<ffffffffb941a533>] do_sync_write+0x93/0xe0
>>> [11159.499222] [<ffffffffb941b010>] vfs_write+0xc0/0x1f0
>>> [11159.499225] [<ffffffffb941c002>] SyS_pwrite64+0x92/0xc0
>>> [11159.499230] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/
>>> 0x160
>>> [11159.499234] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21
>>> [11159.499238] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [11279.488720] INFO: task xfsaild/dm-10:1134 blocked for more than 120
>>> seconds.
>>> [11279.490197] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> disables this message.
>>> [11279.491665] xfsaild/dm-10 D ffff9720a8660fd0 0 1134 2
>>> 0x00000000
>>> [11279.491671] Call Trace:
>>> [11279.491682] [<ffffffffb92a3a2e>] ? try_to_del_timer_sync+0x5e/0x90
>>> [11279.491688] [<ffffffffb9913f79>] schedule+0x29/0x70
>>> [11279.491744] [<ffffffffc060de36>] _xfs_log_force+0x1c6/0x2c0 [xfs]
>>> [11279.491750] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20
>>> [11279.491783] [<ffffffffc0619fec>] ? xfsaild+0x16c/0x6f0 [xfs]
>>> [11279.491817] [<ffffffffc060df5c>] xfs_log_force+0x2c/0x70 [xfs]
>>> [11279.491849] [<ffffffffc0619e80>] ? xfs_trans_ail_cursor_first+0x90/0x90
>>> [xfs]
>>> [11279.491880] [<ffffffffc0619fec>] xfsaild+0x16c/0x6f0 [xfs]
>>> [11279.491913] [<ffffffffc0619e80>] ? xfs_trans_ail_cursor_first+0x90/0x90
>>> [xfs]
>>> [11279.491919] [<ffffffffb92bb161>] kthread+0xd1/0xe0
>>> [11279.491926] [<ffffffffb92bb090>] ? insert_kthread_work+0x40/0x40
>>> [11279.491932] [<ffffffffb9920677>] ret_from_fork_nospec_begin+0x2
>>> 1/0x21
>>> [11279.491936] [<ffffffffb92bb090>] ? insert_kthread_work+0x40/0x40
>>> [11279.491976] INFO: task glusterclogfsyn:14934 blocked for more than
>>> 120 seconds.
>>> [11279.493466] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> disables this message.
>>> [11279.494952] glusterclogfsyn D ffff97209832af70 0 14934 1
>>> 0x00000080
>>> [11279.494957] Call Trace:
>>> [11279.494979] [<ffffffffc0309839>] ? __split_and_process_bio+0x2e9/0x520
>>> [dm_mod]
>>> [11279.494983] [<ffffffffb9913f79>] schedule+0x29/0x70
>>> [11279.494987] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0
>>> [11279.494997] [<ffffffffc0309d98>] ? dm_make_request+0x128/0x1a0
>>> [dm_mod]
>>> [11279.495001] [<ffffffffb991348d>] io_schedule_timeout+0xad/0x130
>>> [11279.495005] [<ffffffffb99145ad>] wait_for_completion_io+0xfd/0x140
>>> [11279.495010] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20
>>> [11279.495016] [<ffffffffb951e574>] blkdev_issue_flush+0xb4/0x110
>>> [11279.495049] [<ffffffffc06064b9>] xfs_blkdev_issue_flush+0x19/0x20
>>> [xfs]
>>> [11279.495079] [<ffffffffc05eec40>] xfs_file_fsync+0x1b0/0x1e0 [xfs]
>>> [11279.495086] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0
>>> [11279.495090] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/
>>> 0x160
>>> [11279.495094] [<ffffffffb944f3d0>] SyS_fsync+0x10/0x20
>>> [11279.495098] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21
>>> [11279.495102] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [11279.495105] INFO: task glusterposixfsy:14941 blocked for more than
>>> 120 seconds.
>>> [11279.496606] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> disables this message.
>>> [11279.498114] glusterposixfsy D ffff972495f84f10 0 14941 1
>>> 0x00000080
>>> [11279.498118] Call Trace:
>>> [11279.498134] [<ffffffffc0309839>] ? __split_and_process_bio+0x2e9/0x520
>>> [dm_mod]
>>> [11279.498138] [<ffffffffb9913f79>] schedule+0x29/0x70
>>> [11279.498142] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0
>>> [11279.498152] [<ffffffffc0309d98>] ? dm_make_request+0x128/0x1a0
>>> [dm_mod]
>>> [11279.498156] [<ffffffffb991348d>] io_schedule_timeout+0xad/0x130
>>> [11279.498160] [<ffffffffb99145ad>] wait_for_completion_io+0xfd/0x140
>>> [11279.498165] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20
>>> [11279.498169] [<ffffffffb951e574>] blkdev_issue_flush+0xb4/0x110
>>> [11279.498202] [<ffffffffc06064b9>] xfs_blkdev_issue_flush+0x19/0x20
>>> [xfs]
>>> [11279.498231] [<ffffffffc05eec40>] xfs_file_fsync+0x1b0/0x1e0 [xfs]
>>> [11279.498238] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0
>>> [11279.498242] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/
>>> 0x160
>>> [11279.498246] [<ffffffffb944f3f3>] SyS_fdatasync+0x13/0x20
>>> [11279.498250] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21
>>> [11279.498254] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [11279.498257] INFO: task glusteriotwr1:14950 blocked for more than 120
>>> seconds.
>>> [11279.499789] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> disables this message.
>>> [11279.501343] glusteriotwr1 D ffff97208b6daf70 0 14950 1
>>> 0x00000080
>>> [11279.501348] Call Trace:
>>> [11279.501353] [<ffffffffb9913f79>] schedule+0x29/0x70
>>> [11279.501390] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs]
>>> [11279.501396] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20
>>> [11279.501428] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs]
>>> [11279.501432] [<ffffffffb944ef3f>] generic_write_sync+0x4f/0x70
>>> [11279.501461] [<ffffffffc05f0545>] xfs_file_aio_write+0x155/0x1b0 [xfs]
>>> [11279.501466] [<ffffffffb941a533>] do_sync_write+0x93/0xe0
>>> [11279.501471] [<ffffffffb941b010>] vfs_write+0xc0/0x1f0
>>> [11279.501475] [<ffffffffb941c002>] SyS_pwrite64+0x92/0xc0
>>> [11279.501479] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/
>>> 0x160
>>> [11279.501483] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21
>>> [11279.501489] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [11279.501493] INFO: task glusteriotwr4:14953 blocked for more than 120
>>> seconds.
>>> [11279.503047] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> disables this message.
>>> [11279.504630] glusteriotwr4 D ffff972499f2bf40 0 14953 1
>>> 0x00000080
>>> [11279.504635] Call Trace:
>>> [11279.504640] [<ffffffffb9913f79>] schedule+0x29/0x70
>>> [11279.504676] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs]
>>> [11279.504681] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20
>>> [11279.504710] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs]
>>> [11279.504714] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0
>>> [11279.504718] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/
>>> 0x160
>>> [11279.504722] [<ffffffffb944f3d0>] SyS_fsync+0x10/0x20
>>> [11279.504725] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21
>>> [11279.504730] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/
>>> 0x160
>>> [12127.466494] perf: interrupt took too long (8263 > 8150), lowering
>>> kernel.perf_event_max_sample_rate to 24000
>>>
>>> --------------------
>>> I think this is the cause of the massive ovirt performance issues
>>> irrespective of gluster volume. At the time this happened, I was also
>>> ssh'ed into the host, and was doing some rpm querry commands. I had just
>>> run rpm -qa |grep glusterfs (to verify what version was actually
>>> installed), and that command took almost 2 minutes to return! Normally it
>>> takes less than 2 seconds. That is all pure local SSD IO, too....
>>>
>>> I'm no expert, but its my understanding that anytime a software causes
>>> these kinds of issues, its a serious bug in the software, even if its
>>> mis-handled exceptions. Is this correct?
>>>
>>> --Jim
>>>
>>> On Tue, May 29, 2018 at 3:01 PM, Jim Kusznir <jim at palousetech.com>
>>> wrote:
>>>
>>>> I think this is the profile information for one of the volumes that
>>>> lives on the SSDs and is fully operational with no down/problem disks:
>>>>
>>>> [root at ovirt2 yum.repos.d]# gluster volume profile data info
>>>> Brick: ovirt2.nwfiber.com:/gluster/brick2/data
>>>> ----------------------------------------------
>>>> Cumulative Stats:
>>>> Block Size: 256b+ 512b+
>>>> 1024b+
>>>> No. of Reads: 983 2696
>>>> 1059
>>>> No. of Writes: 0 1113
>>>> 302
>>>>
>>>> Block Size: 2048b+ 4096b+
>>>> 8192b+
>>>> No. of Reads: 852 88608
>>>> 53526
>>>> No. of Writes: 522 812340
>>>> 76257
>>>>
>>>> Block Size: 16384b+ 32768b+
>>>> 65536b+
>>>> No. of Reads: 54351 241901
>>>> 15024
>>>> No. of Writes: 21636 8656
>>>> 8976
>>>>
>>>> Block Size: 131072b+
>>>> No. of Reads: 524156
>>>> No. of Writes: 296071
>>>> %-latency Avg-latency Min-Latency Max-Latency No. of calls
>>>> Fop
>>>> --------- ----------- ----------- ----------- ------------
>>>> ----
>>>> 0.00 0.00 us 0.00 us 0.00 us 4189
>>>> RELEASE
>>>> 0.00 0.00 us 0.00 us 0.00 us 1257
>>>> RELEASEDIR
>>>> 0.00 46.19 us 12.00 us 187.00 us 69
>>>> FLUSH
>>>> 0.00 147.00 us 78.00 us 367.00 us 86
>>>> REMOVEXATTR
>>>> 0.00 223.46 us 24.00 us 1166.00 us 149
>>>> READDIR
>>>> 0.00 565.34 us 76.00 us 3639.00 us 88
>>>> FTRUNCATE
>>>> 0.00 263.28 us 20.00 us 28385.00 us 228
>>>> LK
>>>> 0.00 98.84 us 2.00 us 880.00 us 1198
>>>> OPENDIR
>>>> 0.00 91.59 us 26.00 us 10371.00 us 3853
>>>> STATFS
>>>> 0.00 494.14 us 17.00 us 193439.00 us 1171
>>>> GETXATTR
>>>> 0.00 299.42 us 35.00 us 9799.00 us 2044
>>>> READDIRP
>>>> 0.00 1965.31 us 110.00 us 382258.00 us 321
>>>> XATTROP
>>>> 0.01 113.40 us 24.00 us 61061.00 us 8134
>>>> STAT
>>>> 0.01 755.38 us 57.00 us 607603.00 us 3196
>>>> DISCARD
>>>> 0.05 2690.09 us 58.00 us 2704761.00 us 3206
>>>> OPEN
>>>> 0.10 119978.25 us 97.00 us 9406684.00 us 154
>>>> SETATTR
>>>> 0.18 101.73 us 28.00 us 700477.00 us 313379
>>>> FSTAT
>>>> 0.23 1059.84 us 25.00 us 2716124.00 us 38255
>>>> LOOKUP
>>>> 0.47 1024.11 us 54.00 us 6197164.00 us 81455
>>>> FXATTROP
>>>> 1.72 2984.00 us 15.00 us 37098954.00 us 103020
>>>> FINODELK
>>>> 5.92 44315.32 us 51.00 us 24731536.00 us 23957
>>>> FSYNC
>>>> 13.27 2399.78 us 25.00 us 22089540.00 us 991005
>>>> READ
>>>> 37.00 5980.43 us 52.00 us 22099889.00 us 1108976
>>>> WRITE
>>>> 41.04 5452.75 us 13.00 us 22102452.00 us 1349053
>>>> INODELK
>>>>
>>>> Duration: 10026 seconds
>>>> Data Read: 80046027759 bytes
>>>> Data Written: 44496632320 bytes
>>>>
>>>> Interval 1 Stats:
>>>> Block Size: 256b+ 512b+
>>>> 1024b+
>>>> No. of Reads: 983 2696
>>>> 1059
>>>> No. of Writes: 0 838
>>>> 185
>>>>
>>>> Block Size: 2048b+ 4096b+
>>>> 8192b+
>>>> No. of Reads: 852 85856
>>>> 51575
>>>> No. of Writes: 382 705802
>>>> 57812
>>>>
>>>> Block Size: 16384b+ 32768b+
>>>> 65536b+
>>>> No. of Reads: 52673 232093
>>>> 14984
>>>> No. of Writes: 13499 4908
>>>> 4242
>>>>
>>>> Block Size: 131072b+
>>>> No. of Reads: 460040
>>>> No. of Writes: 6411
>>>> %-latency Avg-latency Min-Latency Max-Latency No. of calls
>>>> Fop
>>>> --------- ----------- ----------- ----------- ------------
>>>> ----
>>>> 0.00 0.00 us 0.00 us 0.00 us 2093
>>>> RELEASE
>>>> 0.00 0.00 us 0.00 us 0.00 us 1093
>>>> RELEASEDIR
>>>> 0.00 53.38 us 26.00 us 111.00 us 16
>>>> FLUSH
>>>> 0.00 145.14 us 78.00 us 367.00 us 71
>>>> REMOVEXATTR
>>>> 0.00 190.96 us 114.00 us 298.00 us 71
>>>> SETATTR
>>>> 0.00 213.38 us 24.00 us 1145.00 us 90
>>>> READDIR
>>>> 0.00 263.28 us 20.00 us 28385.00 us 228
>>>> LK
>>>> 0.00 101.76 us 2.00 us 880.00 us 1093
>>>> OPENDIR
>>>> 0.01 93.60 us 27.00 us 10371.00 us 3090
>>>> STATFS
>>>> 0.02 537.47 us 17.00 us 193439.00 us 1038
>>>> GETXATTR
>>>> 0.03 297.44 us 35.00 us 9799.00 us 1990
>>>> READDIRP
>>>> 0.03 2357.28 us 110.00 us 382258.00 us 253
>>>> XATTROP
>>>> 0.04 385.93 us 58.00 us 47593.00 us 2091
>>>> OPEN
>>>> 0.04 114.86 us 24.00 us 61061.00 us 7715
>>>> STAT
>>>> 0.06 444.59 us 57.00 us 333240.00 us 3053
>>>> DISCARD
>>>> 0.42 316.24 us 25.00 us 290728.00 us 29823
>>>> LOOKUP
>>>> 0.73 257.92 us 54.00 us 344812.00 us 63296
>>>> FXATTROP
>>>> 1.37 98.30 us 28.00 us 67621.00 us 313172
>>>> FSTAT
>>>> 1.58 2124.69 us 51.00 us 849200.00 us 16717
>>>> FSYNC
>>>> 5.73 162.46 us 52.00 us 748492.00 us 794079
>>>> WRITE
>>>> 7.19 2065.17 us 16.00 us 37098954.00 us 78381
>>>> FINODELK
>>>> 36.44 886.32 us 25.00 us 2216436.00 us 925421
>>>> READ
>>>> 46.30 1178.04 us 13.00 us 1700704.00 us 884635
>>>> INODELK
>>>>
>>>> Duration: 7485 seconds
>>>> Data Read: 71250527215 bytes
>>>> Data Written: 5119903744 bytes
>>>>
>>>> Brick: ovirt3.nwfiber.com:/gluster/brick2/data
>>>> ----------------------------------------------
>>>> Cumulative Stats:
>>>> Block Size: 1b+
>>>> No. of Reads: 0
>>>> No. of Writes: 3264419
>>>> %-latency Avg-latency Min-Latency Max-Latency No. of calls
>>>> Fop
>>>> --------- ----------- ----------- ----------- ------------
>>>> ----
>>>> 0.00 0.00 us 0.00 us 0.00 us 90
>>>> FORGET
>>>> 0.00 0.00 us 0.00 us 0.00 us 9462
>>>> RELEASE
>>>> 0.00 0.00 us 0.00 us 0.00 us 4254
>>>> RELEASEDIR
>>>> 0.00 50.52 us 13.00 us 190.00 us 71
>>>> FLUSH
>>>> 0.00 186.97 us 87.00 us 713.00 us 86
>>>> REMOVEXATTR
>>>> 0.00 79.32 us 33.00 us 189.00 us 228
>>>> LK
>>>> 0.00 220.98 us 129.00 us 513.00 us 86
>>>> SETATTR
>>>> 0.01 259.30 us 26.00 us 2632.00 us 137
>>>> READDIR
>>>> 0.02 322.76 us 145.00 us 2125.00 us 321
>>>> XATTROP
>>>> 0.03 109.55 us 2.00 us 1258.00 us 1193
>>>> OPENDIR
>>>> 0.05 70.21 us 21.00 us 431.00 us 3196
>>>> DISCARD
>>>> 0.05 169.26 us 21.00 us 2315.00 us 1545
>>>> GETXATTR
>>>> 0.12 176.85 us 63.00 us 2844.00 us 3206
>>>> OPEN
>>>> 0.61 303.49 us 90.00 us 3085.00 us 9633
>>>> FSTAT
>>>> 2.44 305.66 us 28.00 us 3716.00 us 38230
>>>> LOOKUP
>>>> 4.52 266.22 us 55.00 us 53424.00 us 81455
>>>> FXATTROP
>>>> 6.96 1397.99 us 51.00 us 64822.00 us 23889
>>>> FSYNC
>>>> 16.48 84.74 us 25.00 us 6917.00 us 932592
>>>> WRITE
>>>> 30.16 106.90 us 13.00 us 3920189.00 us 1353046
>>>> INODELK
>>>> 38.55 1794.52 us 14.00 us 16210553.00 us 103039
>>>> FINODELK
>>>>
>>>> Duration: 66562 seconds
>>>> Data Read: 0 bytes
>>>> Data Written: 3264419 bytes
>>>>
>>>> Interval 1 Stats:
>>>> Block Size: 1b+
>>>> No. of Reads: 0
>>>> No. of Writes: 794080
>>>> %-latency Avg-latency Min-Latency Max-Latency No. of calls
>>>> Fop
>>>> --------- ----------- ----------- ----------- ------------
>>>> ----
>>>> 0.00 0.00 us 0.00 us 0.00 us 2093
>>>> RELEASE
>>>> 0.00 0.00 us 0.00 us 0.00 us 1093
>>>> RELEASEDIR
>>>> 0.00 70.31 us 26.00 us 125.00 us 16
>>>> FLUSH
>>>> 0.00 193.10 us 103.00 us 713.00 us 71
>>>> REMOVEXATTR
>>>> 0.01 227.32 us 133.00 us 513.00 us 71
>>>> SETATTR
>>>> 0.01 79.32 us 33.00 us 189.00 us 228
>>>> LK
>>>> 0.01 259.83 us 35.00 us 1138.00 us 89
>>>> READDIR
>>>> 0.03 318.26 us 145.00 us 2047.00 us 253
>>>> XATTROP
>>>> 0.04 112.67 us 3.00 us 1258.00 us 1093
>>>> OPENDIR
>>>> 0.06 167.98 us 23.00 us 1951.00 us 1014
>>>> GETXATTR
>>>> 0.08 70.97 us 22.00 us 431.00 us 3053
>>>> DISCARD
>>>> 0.13 183.78 us 66.00 us 2844.00 us 2091
>>>> OPEN
>>>> 1.01 303.82 us 90.00 us 3085.00 us 9610
>>>> FSTAT
>>>> 3.27 316.59 us 30.00 us 3716.00 us 29820
>>>> LOOKUP
>>>> 5.83 265.79 us 59.00 us 53424.00 us 63296
>>>> FXATTROP
>>>> 7.95 1373.89 us 51.00 us 64822.00 us 16717
>>>> FSYNC
>>>> 23.17 851.99 us 14.00 us 16210553.00 us 78555
>>>> FINODELK
>>>> 24.04 87.44 us 27.00 us 6917.00 us 794081
>>>> WRITE
>>>> 34.36 111.91 us 14.00 us 984871.00 us 886790
>>>> INODELK
>>>>
>>>> Duration: 7485 seconds
>>>> Data Read: 0 bytes
>>>> Data Written: 794080 bytes
>>>>
>>>>
>>>> -----------------------
>>>> Here is the data from the volume that is backed by the SHDDs and has
>>>> one failed disk:
>>>> [root at ovirt2 yum.repos.d]# gluster volume profile data-hdd info
>>>> Brick: 172.172.1.12:/gluster/brick3/data-hdd
>>>> --------------------------------------------
>>>> Cumulative Stats:
>>>> Block Size: 256b+ 512b+
>>>> 1024b+
>>>> No. of Reads: 1702 86
>>>> 16
>>>> No. of Writes: 0 767
>>>> 71
>>>>
>>>> Block Size: 2048b+ 4096b+
>>>> 8192b+
>>>> No. of Reads: 19 51841
>>>> 2049
>>>> No. of Writes: 76 60668
>>>> 35727
>>>>
>>>> Block Size: 16384b+ 32768b+
>>>> 65536b+
>>>> No. of Reads: 1744 639
>>>> 1088
>>>> No. of Writes: 8524 2410
>>>> 1285
>>>>
>>>> Block Size: 131072b+
>>>> No. of Reads: 771999
>>>> No. of Writes: 29584
>>>> %-latency Avg-latency Min-Latency Max-Latency No. of calls
>>>> Fop
>>>> --------- ----------- ----------- ----------- ------------
>>>> ----
>>>> 0.00 0.00 us 0.00 us 0.00 us 2902
>>>> RELEASE
>>>> 0.00 0.00 us 0.00 us 0.00 us 1517
>>>> RELEASEDIR
>>>> 0.00 197.00 us 197.00 us 197.00 us 1
>>>> FTRUNCATE
>>>> 0.00 70.24 us 16.00 us 758.00 us 51
>>>> FLUSH
>>>> 0.00 143.93 us 82.00 us 305.00 us 57
>>>> REMOVEXATTR
>>>> 0.00 178.63 us 105.00 us 712.00 us 60
>>>> SETATTR
>>>> 0.00 67.30 us 19.00 us 572.00 us 555
>>>> LK
>>>> 0.00 322.80 us 23.00 us 4673.00 us 138
>>>> READDIR
>>>> 0.00 336.56 us 106.00 us 11994.00 us 237
>>>> XATTROP
>>>> 0.00 84.70 us 28.00 us 1071.00 us 3469
>>>> STATFS
>>>> 0.01 387.75 us 2.00 us 146017.00 us 1467
>>>> OPENDIR
>>>> 0.01 148.59 us 21.00 us 64374.00 us 4454
>>>> STAT
>>>> 0.02 783.02 us 16.00 us 93502.00 us 1902
>>>> GETXATTR
>>>> 0.03 1516.10 us 17.00 us 210690.00 us 1364
>>>> ENTRYLK
>>>> 0.03 2555.47 us 300.00 us 674454.00 us 1064
>>>> READDIRP
>>>> 0.07 85.74 us 19.00 us 68340.00 us 62849
>>>> FSTAT
>>>> 0.07 1978.12 us 59.00 us 202596.00 us 2729
>>>> OPEN
>>>> 0.22 708.57 us 15.00 us 394799.00 us 25447
>>>> LOOKUP
>>>> 5.94 2331.74 us 15.00 us 1099530.00 us 207534
>>>> FINODELK
>>>> 7.31 8311.75 us 58.00 us 1800216.00 us 71668
>>>> FXATTROP
>>>> 12.49 7735.19 us 51.00 us 3595513.00 us 131642
>>>> WRITE
>>>> 17.70 957.08 us 16.00 us 13700466.00 us 1508160
>>>> INODELK
>>>> 24.55 2546.43 us 26.00 us 5077347.00 us 786060
>>>> READ
>>>> 31.56 49699.15 us 47.00 us 3746331.00 us 51777
>>>> FSYNC
>>>>
>>>> Duration: 10101 seconds
>>>> Data Read: 101562897361 bytes
>>>> Data Written: 4834450432 bytes
>>>>
>>>> Interval 0 Stats:
>>>> Block Size: 256b+ 512b+
>>>> 1024b+
>>>> No. of Reads: 1702 86
>>>> 16
>>>> No. of Writes: 0 767
>>>> 71
>>>>
>>>> Block Size: 2048b+ 4096b+
>>>> 8192b+
>>>> No. of Reads: 19 51841
>>>> 2049
>>>> No. of Writes: 76 60668
>>>> 35727
>>>>
>>>> Block Size: 16384b+ 32768b+
>>>> 65536b+
>>>> No. of Reads: 1744 639
>>>> 1088
>>>> No. of Writes: 8524 2410
>>>> 1285
>>>>
>>>> Block Size: 131072b+
>>>> No. of Reads: 771999
>>>> No. of Writes: 29584
>>>> %-latency Avg-latency Min-Latency Max-Latency No. of calls
>>>> Fop
>>>> --------- ----------- ----------- ----------- ------------
>>>> ----
>>>> 0.00 0.00 us 0.00 us 0.00 us 2902
>>>> RELEASE
>>>> 0.00 0.00 us 0.00 us 0.00 us 1517
>>>> RELEASEDIR
>>>> 0.00 197.00 us 197.00 us 197.00 us 1
>>>> FTRUNCATE
>>>> 0.00 70.24 us 16.00 us 758.00 us 51
>>>> FLUSH
>>>> 0.00 143.93 us 82.00 us 305.00 us 57
>>>> REMOVEXATTR
>>>> 0.00 178.63 us 105.00 us 712.00 us 60
>>>> SETATTR
>>>> 0.00 67.30 us 19.00 us 572.00 us 555
>>>> LK
>>>> 0.00 322.80 us 23.00 us 4673.00 us 138
>>>> READDIR
>>>> 0.00 336.56 us 106.00 us 11994.00 us 237
>>>> XATTROP
>>>> 0.00 84.70 us 28.00 us 1071.00 us 3469
>>>> STATFS
>>>> 0.01 387.75 us 2.00 us 146017.00 us 1467
>>>> OPENDIR
>>>> 0.01 148.59 us 21.00 us 64374.00 us 4454
>>>> STAT
>>>> 0.02 783.02 us 16.00 us 93502.00 us 1902
>>>> GETXATTR
>>>> 0.03 1516.10 us 17.00 us 210690.00 us 1364
>>>> ENTRYLK
>>>> 0.03 2555.47 us 300.00 us 674454.00 us 1064
>>>> READDIRP
>>>> 0.07 85.73 us 19.00 us 68340.00 us 62849
>>>> FSTAT
>>>> 0.07 1978.12 us 59.00 us 202596.00 us 2729
>>>> OPEN
>>>> 0.22 708.57 us 15.00 us 394799.00 us 25447
>>>> LOOKUP
>>>> 5.94 2334.57 us 15.00 us 1099530.00 us 207534
>>>> FINODELK
>>>> 7.31 8311.49 us 58.00 us 1800216.00 us 71668
>>>> FXATTROP
>>>> 12.49 7735.32 us 51.00 us 3595513.00 us 131642
>>>> WRITE
>>>> 17.71 957.08 us 16.00 us 13700466.00 us 1508160
>>>> INODELK
>>>> 24.56 2546.42 us 26.00 us 5077347.00 us 786060
>>>> READ
>>>> 31.54 49651.63 us 47.00 us 3746331.00 us 51777
>>>> FSYNC
>>>>
>>>> Duration: 10101 seconds
>>>> Data Read: 101562897361 bytes
>>>> Data Written: 4834450432 bytes
>>>>
>>>>
>>>> On Tue, May 29, 2018 at 2:55 PM, Jim Kusznir <jim at palousetech.com>
>>>> wrote:
>>>>
>>>>> Thank you for your response.
>>>>>
>>>>> I have 4 gluster volumes. 3 are replica 2 + arbitrator. replica
>>>>> bricks are on ovirt1 and ovirt2, arbitrator on ovirt3. The 4th volume is
>>>>> replica 3, with a brick on all three ovirt machines.
>>>>>
>>>>> The first 3 volumes are on an SSD disk; the 4th is on a Seagate SSHD
>>>>> (same in all three machines). On ovirt3, the SSHD has reported hard IO
>>>>> failures, and that brick is offline. However, the other two replicas are
>>>>> fully operational (although they still show contents in the heal info
>>>>> command that won't go away, but that may be the case until I replace the
>>>>> failed disk).
>>>>>
>>>>> What is bothering me is that ALL 4 gluster volumes are showing
>>>>> horrible performance issues. At this point, as the bad disk has been
>>>>> completely offlined, I would expect gluster to perform at normal speed, but
>>>>> that is definitely not the case.
>>>>>
>>>>> I've also noticed that the performance hits seem to come in waves:
>>>>> things seem to work acceptably (but slow) for a while, then suddenly, its
>>>>> as if all disk IO on all volumes (including non-gluster local OS disk
>>>>> volumes for the hosts) pause for about 30 seconds, then IO resumes again.
>>>>> During those times, I start getting VM not responding and host not
>>>>> responding notices as well as the applications having major issues.
>>>>>
>>>>> I've shut down most of my VMs and am down to just my essential core
>>>>> VMs (shedded about 75% of my VMs). I still am experiencing the same issues.
>>>>>
>>>>> Am I correct in believing that once the failed disk was brought
>>>>> offline that performance should return to normal?
>>>>>
>>>>> On Tue, May 29, 2018 at 1:27 PM, Alex K <rightkicktech at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> I would check disks status and accessibility of mount points where
>>>>>> your gluster volumes reside.
>>>>>>
>>>>>> On Tue, May 29, 2018, 22:28 Jim Kusznir <jim at palousetech.com> wrote:
>>>>>>
>>>>>>> On one ovirt server, I'm now seeing these messages:
>>>>>>> [56474.239725] blk_update_request: 63 callbacks suppressed
>>>>>>> [56474.239732] blk_update_request: I/O error, dev dm-2, sector 0
>>>>>>> [56474.240602] blk_update_request: I/O error, dev dm-2, sector
>>>>>>> 3905945472
>>>>>>> [56474.241346] blk_update_request: I/O error, dev dm-2, sector
>>>>>>> 3905945584
>>>>>>> [56474.242236] blk_update_request: I/O error, dev dm-2, sector 2048
>>>>>>> [56474.243072] blk_update_request: I/O error, dev dm-2, sector
>>>>>>> 3905943424
>>>>>>> [56474.243997] blk_update_request: I/O error, dev dm-2, sector
>>>>>>> 3905943536
>>>>>>> [56474.247347] blk_update_request: I/O error, dev dm-2, sector 0
>>>>>>> [56474.248315] blk_update_request: I/O error, dev dm-2, sector
>>>>>>> 3905945472
>>>>>>> [56474.249231] blk_update_request: I/O error, dev dm-2, sector
>>>>>>> 3905945584
>>>>>>> [56474.250221] blk_update_request: I/O error, dev dm-2, sector 2048
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Tue, May 29, 2018 at 11:59 AM, Jim Kusznir <jim at palousetech.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> I see in messages on ovirt3 (my 3rd machine, the one upgraded to
>>>>>>>> 4.2):
>>>>>>>>
>>>>>>>> May 29 11:54:41 ovirt3 ovs-vsctl: ovs|00001|db_ctl_base|ERR|unix:/var/run/openvswitch/db.sock:
>>>>>>>> database connection failed (No such file or directory)
>>>>>>>> May 29 11:54:51 ovirt3 ovs-vsctl: ovs|00001|db_ctl_base|ERR|unix:/var/run/openvswitch/db.sock:
>>>>>>>> database connection failed (No such file or directory)
>>>>>>>> May 29 11:55:01 ovirt3 ovs-vsctl: ovs|00001|db_ctl_base|ERR|unix:/var/run/openvswitch/db.sock:
>>>>>>>> database connection failed (No such file or directory)
>>>>>>>> (appears a lot).
>>>>>>>>
>>>>>>>> I also found on the ssh session of that, some sysv warnings about
>>>>>>>> the backing disk for one of the gluster volumes (straight replica 3). The
>>>>>>>> glusterfs process for that disk on that machine went offline. Its my
>>>>>>>> understanding that it should continue to work with the other two machines
>>>>>>>> while I attempt to replace that disk, right? Attempted writes (touching an
>>>>>>>> empty file) can take 15 seconds, repeating it later will be much faster.
>>>>>>>>
>>>>>>>> Gluster generates a bunch of different log files, I don't know what
>>>>>>>> ones you want, or from which machine(s).
>>>>>>>>
>>>>>>>> How do I do "volume profiling"?
>>>>>>>>
>>>>>>>> Thanks!
>>>>>>>>
>>>>>>>> On Tue, May 29, 2018 at 11:53 AM, Sahina Bose <sabose at redhat.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Do you see errors reported in the mount logs for the volume? If
>>>>>>>>> so, could you attach the logs?
>>>>>>>>> Any issues with your underlying disks. Can you also attach output
>>>>>>>>> of volume profiling?
>>>>>>>>>
>>>>>>>>> On Wed, May 30, 2018 at 12:13 AM, Jim Kusznir <jim at palousetech.com
>>>>>>>>> > wrote:
>>>>>>>>>
>>>>>>>>>> Ok, things have gotten MUCH worse this morning. I'm getting
>>>>>>>>>> random errors from VMs, right now, about a third of my VMs have been paused
>>>>>>>>>> due to storage issues, and most of the remaining VMs are not performing
>>>>>>>>>> well.
>>>>>>>>>>
>>>>>>>>>> At this point, I am in full EMERGENCY mode, as my production
>>>>>>>>>> services are now impacted, and I'm getting calls coming in with problems...
>>>>>>>>>>
>>>>>>>>>> I'd greatly appreciate help...VMs are running VERY slowly (when
>>>>>>>>>> they run), and they are steadily getting worse. I don't know why. I was
>>>>>>>>>> seeing CPU peaks (to 100%) on several VMs, in perfect sync, for a few
>>>>>>>>>> minutes at a time (while the VM became unresponsive and any VMs I was
>>>>>>>>>> logged into that were linux were giving me the CPU stuck messages in my
>>>>>>>>>> origional post). Is all this storage related?
>>>>>>>>>>
>>>>>>>>>> I also have two different gluster volumes for VM storage, and
>>>>>>>>>> only one had the issues, but now VMs in both are being affected at the same
>>>>>>>>>> time and same way.
>>>>>>>>>>
>>>>>>>>>> --Jim
>>>>>>>>>>
>>>>>>>>>> On Mon, May 28, 2018 at 10:50 PM, Sahina Bose <sabose at redhat.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> [Adding gluster-users to look at the heal issue]
>>>>>>>>>>>
>>>>>>>>>>> On Tue, May 29, 2018 at 9:17 AM, Jim Kusznir <
>>>>>>>>>>> jim at palousetech.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hello:
>>>>>>>>>>>>
>>>>>>>>>>>> I've been having some cluster and gluster performance issues
>>>>>>>>>>>> lately. I also found that my cluster was out of date, and was trying to
>>>>>>>>>>>> apply updates (hoping to fix some of these), and discovered the ovirt 4.1
>>>>>>>>>>>> repos were taken completely offline. So, I was forced to begin an upgrade
>>>>>>>>>>>> to 4.2. According to docs I found/read, I needed only add the new repo, do
>>>>>>>>>>>> a yum update, reboot, and be good on my hosts (did the yum update, the
>>>>>>>>>>>> engine-setup on my hosted engine). Things seemed to work relatively well,
>>>>>>>>>>>> except for a gluster sync issue that showed up.
>>>>>>>>>>>>
>>>>>>>>>>>> My cluster is a 3 node hyperconverged cluster. I upgraded the
>>>>>>>>>>>> hosted engine first, then engine 3. When engine 3 came back up, for some
>>>>>>>>>>>> reason one of my gluster volumes would not sync. Here's sample output:
>>>>>>>>>>>>
>>>>>>>>>>>> [root at ovirt3 ~]# gluster volume heal data-hdd info
>>>>>>>>>>>> Brick 172.172.1.11:/gluster/brick3/data-hdd
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/48d7ecb8-7ac5-4
>>>>>>>>>>>> 725-bca5-b3519681cf2f/0d6080b0-7018-4fa3-bb82-1dd9ef07d9b9
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/647be733-f153-4
>>>>>>>>>>>> cdc-85bd-ba72544c2631/b453a300-0602-4be1-8310-8bd5abe00971
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/6da854d1-b6be-4
>>>>>>>>>>>> 46b-9bf0-90a0dbbea830/3c93bd1f-b7fa-4aa2-b445-6904e31839ba
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/7f647567-d18c-4
>>>>>>>>>>>> 4f1-a58e-9b8865833acb/f9364470-9770-4bb1-a6b9-a54861849625
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/f3c8e7aa-6ef2-4
>>>>>>>>>>>> 2a7-93d4-e0a4df6dd2fa/2eb0b1ad-2606-44ef-9cd3-ae59610a504b
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/b1ea3f62-0f05-4
>>>>>>>>>>>> ded-8c82-9c91c90e0b61/d5d6bf5a-499f-431d-9013-5453db93ed32
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/8c8b5147-e9d6-4
>>>>>>>>>>>> 810-b45b-185e3ed65727/16f08231-93b0-489d-a2fd-687b6bf88eaa
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/12924435-b9c2-4
>>>>>>>>>>>> aab-ba19-1c1bc31310ef/07b3db69-440e-491e-854c-bbfa18a7cff2
>>>>>>>>>>>> Status: Connected
>>>>>>>>>>>> Number of entries: 8
>>>>>>>>>>>>
>>>>>>>>>>>> Brick 172.172.1.12:/gluster/brick3/data-hdd
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/48d7ecb8-7ac5-4
>>>>>>>>>>>> 725-bca5-b3519681cf2f/0d6080b0-7018-4fa3-bb82-1dd9ef07d9b9
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/647be733-f153-4
>>>>>>>>>>>> cdc-85bd-ba72544c2631/b453a300-0602-4be1-8310-8bd5abe00971
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/b1ea3f62-0f05-4
>>>>>>>>>>>> ded-8c82-9c91c90e0b61/d5d6bf5a-499f-431d-9013-5453db93ed32
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/6da854d1-b6be-4
>>>>>>>>>>>> 46b-9bf0-90a0dbbea830/3c93bd1f-b7fa-4aa2-b445-6904e31839ba
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/7f647567-d18c-4
>>>>>>>>>>>> 4f1-a58e-9b8865833acb/f9364470-9770-4bb1-a6b9-a54861849625
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/8c8b5147-e9d6-4
>>>>>>>>>>>> 810-b45b-185e3ed65727/16f08231-93b0-489d-a2fd-687b6bf88eaa
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/12924435-b9c2-4
>>>>>>>>>>>> aab-ba19-1c1bc31310ef/07b3db69-440e-491e-854c-bbfa18a7cff2
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/f3c8e7aa-6ef2-4
>>>>>>>>>>>> 2a7-93d4-e0a4df6dd2fa/2eb0b1ad-2606-44ef-9cd3-ae59610a504b
>>>>>>>>>>>> Status: Connected
>>>>>>>>>>>> Number of entries: 8
>>>>>>>>>>>>
>>>>>>>>>>>> Brick 172.172.1.13:/gluster/brick3/data-hdd
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/b1ea3f62-0f05-4
>>>>>>>>>>>> ded-8c82-9c91c90e0b61/d5d6bf5a-499f-431d-9013-5453db93ed32
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/8c8b5147-e9d6-4
>>>>>>>>>>>> 810-b45b-185e3ed65727/16f08231-93b0-489d-a2fd-687b6bf88eaa
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/12924435-b9c2-4
>>>>>>>>>>>> aab-ba19-1c1bc31310ef/07b3db69-440e-491e-854c-bbfa18a7cff2
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/f3c8e7aa-6ef2-4
>>>>>>>>>>>> 2a7-93d4-e0a4df6dd2fa/2eb0b1ad-2606-44ef-9cd3-ae59610a504b
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/647be733-f153-4
>>>>>>>>>>>> cdc-85bd-ba72544c2631/b453a300-0602-4be1-8310-8bd5abe00971
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/48d7ecb8-7ac5-4
>>>>>>>>>>>> 725-bca5-b3519681cf2f/0d6080b0-7018-4fa3-bb82-1dd9ef07d9b9
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/6da854d1-b6be-4
>>>>>>>>>>>> 46b-9bf0-90a0dbbea830/3c93bd1f-b7fa-4aa2-b445-6904e31839ba
>>>>>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/7f647567-d18c-4
>>>>>>>>>>>> 4f1-a58e-9b8865833acb/f9364470-9770-4bb1-a6b9-a54861849625
>>>>>>>>>>>> Status: Connected
>>>>>>>>>>>> Number of entries: 8
>>>>>>>>>>>>
>>>>>>>>>>>> ---------
>>>>>>>>>>>> Its been in this state for a couple days now, and bandwidth
>>>>>>>>>>>> monitoring shows no appreciable data moving. I've tried repeatedly
>>>>>>>>>>>> commanding a full heal from all three clusters in the node. Its always the
>>>>>>>>>>>> same files that need healing.
>>>>>>>>>>>>
>>>>>>>>>>>> When running gluster volume heal data-hdd statistics, I see
>>>>>>>>>>>> sometimes different information, but always some number of "heal failed"
>>>>>>>>>>>> entries. It shows 0 for split brain.
>>>>>>>>>>>>
>>>>>>>>>>>> I'm not quite sure what to do. I suspect it may be due to
>>>>>>>>>>>> nodes 1 and 2 still being on the older ovirt/gluster release, but I'm
>>>>>>>>>>>> afraid to upgrade and reboot them until I have a good gluster sync (don't
>>>>>>>>>>>> need to create a split brain issue). How do I proceed with this?
>>>>>>>>>>>>
>>>>>>>>>>>> Second issue: I've been experiencing VERY POOR performance on
>>>>>>>>>>>> most of my VMs. To the tune that logging into a windows 10 vm via remote
>>>>>>>>>>>> desktop can take 5 minutes, launching quickbooks inside said vm can easily
>>>>>>>>>>>> take 10 minutes. On some linux VMs, I get random messages like this:
>>>>>>>>>>>> Message from syslogd at unifi at May 28 20:39:23 ...
>>>>>>>>>>>> kernel:[6171996.308904] NMI watchdog: BUG: soft lockup - CPU#0
>>>>>>>>>>>> stuck for 22s! [mongod:14766]
>>>>>>>>>>>>
>>>>>>>>>>>> (the process and PID are often different)
>>>>>>>>>>>>
>>>>>>>>>>>> I'm not quite sure what to do about this either. My initial
>>>>>>>>>>>> thought was upgrad everything to current and see if its still there, but I
>>>>>>>>>>>> cannot move forward with that until my gluster is healed...
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks!
>>>>>>>>>>>> --Jim
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Users mailing list -- users at ovirt.org
>>>>>>>>>>>> To unsubscribe send an email to users-leave at ovirt.org
>>>>>>>>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>>>>>>>>>>> oVirt Code of Conduct: https://www.ovirt.org/communit
>>>>>>>>>>>> y/about/community-guidelines/
>>>>>>>>>>>> List Archives: https://lists.ovirt.org/archiv
>>>>>>>>>>>> es/list/users at ovirt.org/message/3LEV6ZQ3JV2XLAL7NYBTXOYMYUOT
>>>>>>>>>>>> IRQF/
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list -- users at ovirt.org
>>>>>>> To unsubscribe send an email to users-leave at ovirt.org
>>>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>>>>>> oVirt Code of Conduct: https://www.ovirt.org/communit
>>>>>>> y/about/community-guidelines/
>>>>>>> List Archives: https://lists.ovirt.org/archiv
>>>>>>> es/list/users at ovirt.org/message/ACO7RFSLBSRBAIONIC2HQ6Z24ZDES5MF/
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list -- users at ovirt.org
>>> To unsubscribe send an email to users-leave at ovirt.org
>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>> oVirt Code of Conduct: https://www.ovirt.org/communit
>>> y/about/community-guidelines/
>>> List Archives: https://lists.ovirt.org/archiv
>>> es/list/users at ovirt.org/message/3DEQQLJM3WHQNZJ7KEMRZVFZ52MTIL74/
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20180530/3e37c345/attachment.html>
More information about the Gluster-users
mailing list