[Gluster-users] Failed to get quota limits
Hari Gowtham
hgowtham at redhat.com
Tue Feb 13 10:49:28 UTC 2018
Yes, I need the log files in that duration, the log rotated file after
hitting the
issue aren't necessary, but the ones before hitting the issues are needed
(not just when you hit it, the ones even before you hit it).
Yes, you have to do a stat from the client through fuse mount.
On Tue, Feb 13, 2018 at 3:56 PM, mabi <mabi at protonmail.ch> wrote:
> Thank you for your answer. This problem seem to have started since last week, so should I also send you the same log files but for last week? I think logrotate rotates them on a weekly basis.
>
> The only two quota commands we use are the following:
>
> gluster volume quota myvolume limit-usage /directory 10GB
> gluster volume quota myvolume list
>
> basically to set a new quota or to list the current quotas. The quota list was working in the past yes but we already had a similar issue where the quotas disappeared last August 2017:
>
> http://lists.gluster.org/pipermail/gluster-users/2017-August/031946.html
>
> In the mean time the only thing we did is to upgrade from 3.8 to 3.10.
>
> There are actually no errors to be seen using any gluster commands. The "quota myvolume list" returns simply nothing.
>
> In order to lookup the directories should I run a "stat" on them? and if yes should I do that on a client through the fuse mount?
>
>
> -------- Original Message --------
> On February 13, 2018 10:58 AM, Hari Gowtham <hgowtham at redhat.com> wrote:
>
>>The log provided are from 11th, you have seen the issue a while before
>> that itself.
>>
>> The logs help us to know if something has actually went wrong.
>> once something goes wrong the output might get affected and i need to know what
>> went wrong. Which means i need the log from the beginning.
>>
>> and i need to know a few more things,
>> Was the quota list command was working as expected at the beginning?
>> If yes, what were the commands issued, before you noticed this problem.
>> Is there any other error that you see other than this?
>>
>> And can you try looking up the directories the limits are set on and
>> check if that fixes the error?
>>
>>>-------- Original Message --------
>>> On February 13, 2018 10:44 AM, mabi mabi at protonmail.ch wrote:
>>>>Hi Hari,
>>>>Sure no problem, I will send you in a minute another mail where you can download all the relevant log files including the quota.conf binary file. Let me know if you need anything else. In the mean time here below is the output of a volume status.
>>>>Best regards,
>>>> M.
>>>>Status of volume: myvolume
>>>> Gluster process TCP Port RDMA Port Online Pid
>>>>Brick gfs1a.domain.local:/data/myvolume
>>>> /brick 49153 0 Y 3214
>>>> Brick gfs1b.domain.local:/data/myvolume
>>>> /brick 49154 0 Y 3256
>>>> Brick gfs1c.domain.local:/srv/glusterf
>>>> s/myvolume/brick 49153 0 Y 515
>>>> Self-heal Daemon on localhost N/A N/A Y 3186
>>>> Quota Daemon on localhost N/A N/A Y 3195
>>>> Self-heal Daemon on gfs1b.domain.local N/A N/A Y 3217
>>>> Quota Daemon on gfs1b.domain.local N/A N/A Y 3229
>>>> Self-heal Daemon on gfs1c.domain.local N/A N/A Y 486
>>>> Quota Daemon on gfs1c.domain.local N/A N/A Y 495
>>>>Task Status of Volume myvolume
>>>>There are no active volume tasks
>>>>-------- Original Message --------
>>>> On February 13, 2018 10:09 AM, Hari Gowtham hgowtham at redhat.com wrote:
>>>>>Hi,
>>>>> A part of the log won't be enough to debug the issue.
>>>>> Need the whole log messages till date.
>>>>> You can send it as attachments.
>>>>> Yes the quota.conf is a binary file.
>>>>> And I need the volume status output too.
>>>>> On Tue, Feb 13, 2018 at 1:56 PM, mabi mabi at protonmail.ch wrote:
>>>>>>Hi Hari,
>>>>>> Sorry for not providing you more details from the start. Here below you will
>>>>>> find all the relevant log entries and info. Regarding the quota.conf file I
>>>>>> have found one for my volume but it is a binary file. Is it supposed to be
>>>>>> binary or text?
>>>>>> Regards,
>>>>>> M.
>>>>>> *** gluster volume info myvolume ***
>>>>>> Volume Name: myvolume
>>>>>> Type: Replicate
>>>>>> Volume ID: e7a40a1b-45c9-4d3c-bb19-0c59b4eceec5
>>>>>> Status: Started
>>>>>> Snapshot Count: 0
>>>>>> Number of Bricks: 1 x (2 + 1) = 3
>>>>>> Transport-type: tcp
>>>>>> Bricks:
>>>>>> Brick1: gfs1a.domain.local:/data/myvolume/brick
>>>>>> Brick2: gfs1b.domain.local:/data/myvolume/brick
>>>>>> Brick3: gfs1c.domain.local:/srv/glusterfs/myvolume/brick (arbiter)
>>>>>> Options Reconfigured:
>>>>>> server.event-threads: 4
>>>>>> client.event-threads: 4
>>>>>> performance.readdir-ahead: on
>>>>>> nfs.disable: on
>>>>>> features.quota: on
>>>>>> features.inode-quota: on
>>>>>> features.quota-deem-statfs: on
>>>>>> transport.address-family: inet
>>>>>> *** /var/log/glusterfs/glusterd.log ***
>>>>>> [2018-02-13 08:16:09.929568] E [MSGID: 101042] [compat.c:569:gf_umount_lazy]
>>>>>> 0-management: Lazy unmount of /var/run/gluster/myvolume_quota_list/
>>>>>> [2018-02-13 08:16:28.596527] I [MSGID: 106499]
>>>>>> [glusterd-handler.c:4363:__glusterd_handle_status_volume] 0-management:
>>>>>> Received status volume req for volume myvolume
>>>>>> [2018-02-13 08:16:28.601097] I [MSGID: 106419]
>>>>>> [glusterd-utils.c:6110:glusterd_add_inode_size_to_dict] 0-management: the
>>>>>> brick on data/myvolume (zfs) uses dynamic inode sizes
>>>>>> *** /var/log/glusterfs/cmd_history.log ***
>>>>>> [2018-02-13 08:16:28.605478] : volume status myvolume detail : SUCCESS
>>>>>> *** /var/log/glusterfs/quota-mount-myvolume.log ***
>>>>>> [2018-02-13 08:16:09.934117] I [MSGID: 100030] [glusterfsd.c:2503:main]
>>>>>> 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.10.7
>>>>>> (args: /usr/sbin/glusterfs --volfile-server localhost --volfile-id myvolume
>>>>>> -l /var/log/glusterfs/quota-mount-myvolume.log -p
>>>>>> /var/run/gluster/myvolume_quota_list.pid --client-pid -5
>>>>>> /var/run/gluster/myvolume_quota_list/)
>>>>>> [2018-02-13 08:16:09.940432] I [MSGID: 101190]
>>>>>> [event-epoll.c:629:event_dispatch_epoll_worker] 0-epoll: Started thread with
>>>>>> index 1
>>>>>> [2018-02-13 08:16:09.940491] E [socket.c:2327:socket_connect_finish]
>>>>>> 0-glusterfs: connection to ::1:24007 failed (Connection refused);
>>>>>> disconnecting socket
>>>>>> [2018-02-13 08:16:09.940519] I [glusterfsd-mgmt.c:2134:mgmt_rpc_notify]
>>>>>> 0-glusterfsd-mgmt: disconnected from remote-host: localhost
>>>>>> [2018-02-13 08:16:13.943827] I [afr.c:94:fix_quorum_options]
>>>>>> 0-myvolume-replicate-0: reindeer: incoming qtype = none
>>>>>> [2018-02-13 08:16:13.943857] I [afr.c:116:fix_quorum_options]
>>>>>> 0-myvolume-replicate-0: reindeer: quorum_count = 2147483647
>>>>>> [2018-02-13 08:16:13.945194] I [MSGID: 101190]
>>>>>> [event-epoll.c:629:event_dispatch_epoll_worker] 0-epoll: Started thread with
>>>>>> index 2
>>>>>> [2018-02-13 08:16:13.945237] I [MSGID: 101190]
>>>>>> [event-epoll.c:629:event_dispatch_epoll_worker] 0-epoll: Started thread with
>>>>>> index 4
>>>>>> [2018-02-13 08:16:13.945247] I [MSGID: 101190]
>>>>>> [event-epoll.c:629:event_dispatch_epoll_worker] 0-epoll: Started thread with
>>>>>> index 3
>>>>>> [2018-02-13 08:16:13.945941] W [MSGID: 101174]
>>>>>> [graph.c:361:_log_if_unknown_option] 0-myvolume-readdir-ahead: option
>>>>>> 'parallel-readdir' is not recognized
>>>>>> [2018-02-13 08:16:13.946342] I [MSGID: 114020] [client.c:2352:notify]
>>>>>> 0-myvolume-client-0: parent translators are ready, attempting connect on
>>>>>> transport
>>>>>> [2018-02-13 08:16:13.946789] I [MSGID: 114020] [client.c:2352:notify]
>>>>>> 0-myvolume-client-1: parent translators are ready, attempting connect on
>>>>>> transport
>>>>>> [2018-02-13 08:16:13.947151] I [rpc-clnt.c:2000:rpc_clnt_reconfig]
>>>>>> 0-myvolume-client-0: changing port to 49153 (from 0)
>>>>>> [2018-02-13 08:16:13.947846] I [MSGID: 114057]
>>>>>> [client-handshake.c:1451:select_server_supported_programs]
>>>>>> 0-myvolume-client-0: Using Program GlusterFS 3.3, Num (1298437), Version
>>>>>> (330)
>>>>>> [2018-02-13 08:16:13.948073] I [MSGID: 114020] [client.c:2352:notify]
>>>>>> 0-myvolume-client-2: parent translators are ready, attempting connect on
>>>>>> transport
>>>>>> [2018-02-13 08:16:13.948579] I [rpc-clnt.c:2000:rpc_clnt_reconfig]
>>>>>> 0-myvolume-client-1: changing port to 49154 (from 0)
>>>>>> [2018-02-13 08:16:13.948699] I [MSGID: 114046]
>>>>>> [client-handshake.c:1216:client_setvolume_cbk] 0-myvolume-client-0:
>>>>>> Connected to myvolume-client-0, attached to remote volume
>>>>>> '/data/myvolume/brick'.
>>>>>> [2018-02-13 08:16:13.948747] I [MSGID: 114047]
>>>>>> [client-handshake.c:1227:client_setvolume_cbk] 0-myvolume-client-0: Server
>>>>>> and Client lk-version numbers are not same, reopening the fds
>>>>>> [2018-02-13 08:16:13.948842] I [MSGID: 108005]
>>>>>> [afr-common.c:4813:afr_notify] 0-myvolume-replicate-0: Subvolume
>>>>>> 'myvolume-client-0' came back up; going online.
>>>>>> Final graph:
>>>>>> +------------------------------------------------------------------------------+
>>>>>> 1: volume myvolume-client-0
>>>>>> 2: type protocol/client
>>>>>> 3: option opversion 31004
>>>>>> 4: option clnt-lk-version 1
>>>>>> 5: option volfile-checksum 0
>>>>>> 6: option volfile-key myvolume
>>>>>> 7: option client-version 3.10.7
>>>>>> 8: option process-uuid
>>>>>> gfs1a-14348-2018/02/13-08:16:09:933625-myvolume-client-0-0-0
>>>>>> 9: option fops-version 1298437
>>>>>> 10: option ping-timeout 42
>>>>>> 11: option remote-host gfs1a.domain.local
>>>>>> 12: option remote-subvolume /data/myvolume/brick
>>>>>> 13: option transport-type socket
>>>>>> 14: option transport.address-family inet
>>>>>> 15: option username bea3e634-e174-4bb3-a1d6-25b09d03b536
>>>>>> 16: option password 3a6f98bd-795e-4ec4-adfe-42c61ccfa0a6
>>>>>> 17: option event-threads 4
>>>>>> 18: option transport.tcp-user-timeout 0
>>>>>> 19: option transport.socket.keepalive-time 20
>>>>>> 20: option transport.socket.keepalive-interval 2
>>>>>> 21: option transport.socket.keepalive-count 9
>>>>>> [2018-02-13 08:16:13.949147] I [MSGID: 114035]
>>>>>> [client-handshake.c:202:client_set_lk_version_cbk] 0-myvolume-client-0:
>>>>>> Server lk version = 1
>>>>>> 22: option send-gids true
>>>>>> 23: end-volume
>>>>>> 24:
>>>>>> 25: volume myvolume-client-1
>>>>>> 26: type protocol/client
>>>>>> 27: option ping-timeout 42
>>>>>> 28: option remote-host gfs1b.domain.local
>>>>>> 29: option remote-subvolume /data/myvolume/brick
>>>>>> 30: option transport-type socket
>>>>>> 31: option transport.address-family inet
>>>>>> 32: option username bea3e634-e174-4bb3-a1d6-25b09d03b536
>>>>>> 33: option password 3a6f98bd-795e-4ec4-adfe-42c61ccfa0a6
>>>>>> 34: option event-threads 4
>>>>>> 35: option transport.tcp-user-timeout 0
>>>>>> 36: option transport.socket.keepalive-time 20
>>>>>> 37: option transport.socket.keepalive-interval 2
>>>>>> 38: option transport.socket.keepalive-count 9
>>>>>> 39: option send-gids true
>>>>>> 40: end-volume
>>>>>> 41:
>>>>>> 42: volume myvolume-client-2
>>>>>> 43: type protocol/client
>>>>>> 44: option ping-timeout 42
>>>>>> 45: option remote-host gfs1c.domain.local
>>>>>> 46: option remote-subvolume /srv/glusterfs/myvolume/brick
>>>>>> 47: option transport-type socket
>>>>>> 48: option transport.address-family inet
>>>>>> 49: option username bea3e634-e174-4bb3-a1d6-25b09d03b536
>>>>>> 50: option password 3a6f98bd-795e-4ec4-adfe-42c61ccfa0a6
>>>>>> 51: option event-threads 4
>>>>>> 52: option transport.tcp-user-timeout 0
>>>>>> 53: option transport.socket.keepalive-time 20
>>>>>> 54: option transport.socket.keepalive-interval 2
>>>>>> 55: option transport.socket.keepalive-count 9
>>>>>> 56: option send-gids true
>>>>>> 57: end-volume
>>>>>> 58:
>>>>>> 59: volume myvolume-replicate-0
>>>>>> 60: type cluster/replicate
>>>>>> 61: option afr-pending-xattr
>>>>>> myvolume-client-0,myvolume-client-1,myvolume-client-2
>>>>>> 62: option arbiter-count 1
>>>>>> 63: option use-compound-fops off
>>>>>> 64: subvolumes myvolume-client-0 myvolume-client-1 myvolume-client-2
>>>>>> 65: end-volume
>>>>>> [2018-02-13 08:16:13.949442] I [rpc-clnt.c:2000:rpc_clnt_reconfig]
>>>>>> 0-myvolume-client-2: changing port to 49153 (from 0)
>>>>>> 66:
>>>>>> 67: volume myvolume-dht
>>>>>> 68: type cluster/distribute
>>>>>> 69: option lock-migration off
>>>>>> 70: subvolumes myvolume-replicate-0
>>>>>> 71: end-volume
>>>>>> 72:
>>>>>> 73: volume myvolume-write-behind
>>>>>> 74: type performance/write-behind
>>>>>> 75: subvolumes myvolume-dht
>>>>>> 76: end-volume
>>>>>> 77:
>>>>>> 78: volume myvolume-read-ahead
>>>>>> 79: type performance/read-ahead
>>>>>> 80: subvolumes myvolume-write-behind
>>>>>> 81: end-volume
>>>>>> 82:
>>>>>> 83: volume myvolume-readdir-ahead
>>>>>> 84: type performance/readdir-ahead
>>>>>> 85: option parallel-readdir off
>>>>>> 86: option rda-request-size 131072
>>>>>> 87: option rda-cache-limit 10MB
>>>>>> 88: subvolumes myvolume-read-ahead
>>>>>> 89: end-volume
>>>>>> 90:
>>>>>> 91: volume myvolume-io-cache
>>>>>> 92: type performance/io-cache
>>>>>> 93: subvolumes myvolume-readdir-ahead
>>>>>> 94: end-volume
>>>>>> 95:
>>>>>> 96: volume myvolume-quick-read
>>>>>> 97: type performance/quick-read
>>>>>> 98: subvolumes myvolume-io-cache
>>>>>> 99: end-volume
>>>>>> 100:
>>>>>> 101: volume myvolume-open-behind
>>>>>> 102: type performance/open-behind
>>>>>> 103: subvolumes myvolume-quick-read
>>>>>> 104: end-volume
>>>>>> 105:
>>>>>> 106: volume myvolume-md-cache
>>>>>> 107: type performance/md-cache
>>>>>> 108: subvolumes myvolume-open-behind
>>>>>> 109: end-volume
>>>>>> 110:
>>>>>> 111: volume myvolume
>>>>>> 112: type debug/io-stats
>>>>>> 113: option log-level INFO
>>>>>> 114: option latency-measurement off
>>>>>> 115: option count-fop-hits off
>>>>>> 116: subvolumes myvolume-md-cache
>>>>>> 117: end-volume
>>>>>> 118:
>>>>>> 119: volume meta-autoload
>>>>>> 120: type meta
>>>>>> 121: subvolumes myvolume
>>>>>> 122: end-volume
>>>>>> 123:
>>>>>> +------------------------------------------------------------------------------+
>>>>>> [2018-02-13 08:16:13.949813] I [MSGID: 114057]
>>>>>> [client-handshake.c:1451:select_server_supported_programs]
>>>>>> 0-myvolume-client-1: Using Program GlusterFS 3.3, Num (1298437), Version
>>>>>> (330)
>>>>>> [2018-02-13 08:16:13.950686] I [MSGID: 114057]
>>>>>> [client-handshake.c:1451:select_server_supported_programs]
>>>>>> 0-myvolume-client-2: Using Program GlusterFS 3.3, Num (1298437), Version
>>>>>> (330)
>>>>>> [2018-02-13 08:16:13.950698] I [MSGID: 114046]
>>>>>> [client-handshake.c:1216:client_setvolume_cbk] 0-myvolume-client-1:
>>>>>> Connected to myvolume-client-1, attached to remote volume
>>>>>> '/data/myvolume/brick'.
>>>>>> [2018-02-13 08:16:13.950759] I [MSGID: 114047]
>>>>>> [client-handshake.c:1227:client_setvolume_cbk] 0-myvolume-client-1: Server
>>>>>> and Client lk-version numbers are not same, reopening the fds
>>>>>> [2018-02-13 08:16:13.951009] I [MSGID: 114035]
>>>>>> [client-handshake.c:202:client_set_lk_version_cbk] 0-myvolume-client-1:
>>>>>> Server lk version = 1
>>>>>> [2018-02-13 08:16:13.951320] I [MSGID: 114046]
>>>>>> [client-handshake.c:1216:client_setvolume_cbk] 0-myvolume-client-2:
>>>>>> Connected to myvolume-client-2, attached to remote volume
>>>>>> '/srv/glusterfs/myvolume/brick'.
>>>>>> [2018-02-13 08:16:13.951348] I [MSGID: 114047]
>>>>>> [client-handshake.c:1227:client_setvolume_cbk] 0-myvolume-client-2: Server
>>>>>> and Client lk-version numbers are not same, reopening the fds
>>>>>> [2018-02-13 08:16:13.952626] I [MSGID: 114035]
>>>>>> [client-handshake.c:202:client_set_lk_version_cbk] 0-myvolume-client-2:
>>>>>> Server lk version = 1
>>>>>> [2018-02-13 08:16:13.952704] I [fuse-bridge.c:4138:fuse_init]
>>>>>> 0-glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.24 kernel
>>>>>> 7.23
>>>>>> [2018-02-13 08:16:13.952742] I [fuse-bridge.c:4823:fuse_graph_sync] 0-fuse:
>>>>>> switched to graph 0
>>>>>> [2018-02-13 08:16:13.954337] I [MSGID: 108031]
>>>>>> [afr-common.c:2357:afr_local_discovery_cbk] 0-myvolume-replicate-0:
>>>>>> selecting local read_child myvolume-client-0
>>>>>> [2018-02-13 08:16:14.020681] I [fuse-bridge.c:5081:fuse_thread_proc] 0-fuse:
>>>>>> unmounting /var/run/gluster/myvolume_quota_list/
>>>>>> [2018-02-13 08:16:14.020981] W [glusterfsd.c:1360:cleanup_and_exit]
>>>>>> (-->/lib/x86_64-linux-gnu/libpthread.so.0(+0x8064) [0x7f92aaeef064]
>>>>>> -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5) [0x55d8ddb85f75]
>>>>>> -->/usr/sbin/glusterfs(cleanup_and_exit+0x57) [0x55d8ddb85d97] ) 0-:
>>>>>> received signum (15), shutting down
>>>>>> [2018-02-13 08:16:14.021017] I [fuse-bridge.c:5804:fini] 0-fuse: Unmounting
>>>>>> '/var/run/gluster/myvolume_quota_list/'.
>>>>>> *** /var/log/glusterfs/quotad.log ***
>>>>>> [2018-02-13 08:16:14.023519] W [MSGID: 108027]
>>>>>> [afr-common.c:2718:afr_discover_done] 0-myvolume-replicate-0: no read
>>>>>> subvols for (null)
>>>>>> [2018-02-13 08:16:14.064410] W [dict.c:599:dict_unref]
>>>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x1f3d)
>>>>>> [0x7f63153e7f3d]
>>>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x2d72)
>>>>>> [0x7f63153e8d72]
>>>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>>>>> [0x7f631b9bd870] ) 0-dict: dict is NULL [Invalid argument]
>>>>>> [2018-02-13 08:16:14.074683] W [dict.c:599:dict_unref]
>>>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x1f3d)
>>>>>> [0x7f63153e7f3d]
>>>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x2d72)
>>>>>> [0x7f63153e8d72]
>>>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>>>>> [0x7f631b9bd870] ) 0-dict: dict is NULL [Invalid argument]
>>>>>> [2018-02-13 08:16:14.082040] W [dict.c:599:dict_unref]
>>>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x1f3d)
>>>>>> [0x7f63153e7f3d]
>>>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x2d72)
>>>>>> [0x7f63153e8d72]
>>>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>>>>> [0x7f631b9bd870] ) 0-dict: dict is NULL [Invalid argument]
>>>>>> [2018-02-13 08:16:14.086950] W [dict.c:599:dict_unref]
>>>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x1f3d)
>>>>>> [0x7f63153e7f3d]
>>>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x2d72)
>>>>>> [0x7f63153e8d72]
>>>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>>>>> [0x7f631b9bd870] ) 0-dict: dict is NULL [Invalid argument]
>>>>>> [2018-02-13 08:16:14.087939] W [dict.c:599:dict_unref]
>>>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x1f3d)
>>>>>> [0x7f63153e7f3d]
>>>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x2d72)
>>>>>> [0x7f63153e8d72]
>>>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>>>>> [0x7f631b9bd870] ) 0-dict: dict is NULL [Invalid argument]
>>>>>> [2018-02-13 08:16:14.089775] W [dict.c:599:dict_unref]
>>>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x1f3d)
>>>>>> [0x7f63153e7f3d]
>>>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x2d72)
>>>>>> [0x7f63153e8d72]
>>>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>>>>> [0x7f631b9bd870] ) 0-dict: dict is NULL [Invalid argument]
>>>>>> [2018-02-13 08:16:14.092937] W [dict.c:599:dict_unref]
>>>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x1f3d)
>>>>>> [0x7f63153e7f3d]
>>>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.10.7/xlator/features/quotad.so(+0x2d72)
>>>>>> [0x7f63153e8d72]
>>>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>>>>> [0x7f631b9bd870] ) 0-dict: dict is NULL [Invalid argument]
>>>>>> The message "W [MSGID: 108027] [afr-common.c:2718:afr_discover_done]
>>>>>> 0-myvolume-replicate-0: no read subvols for (null)" repeated 34 times
>>>>>> between [2018-02-13 08:16:14.023519] and [2018-02-13 08:17:26.560943]
>>>>>> *** /var/log/glusterfs/cli.log ***
>>>>>> [2018-02-13 08:16:14.064404] E
>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>> quota limits for 3df709ee-641d-46a2-bd61-889583e3033c
>>>>>> [2018-02-13 08:16:14.074693] E
>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>> quota limits for a27818fe-0248-40fe-bb23-d43d61010478
>>>>>> [2018-02-13 08:16:14.082067] E
>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>> quota limits for daf97388-bcec-4cc0-a8ef-5b93f05b30f6
>>>>>> [2018-02-13 08:16:14.086929] E
>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>> quota limits for 3c768b36-2625-4509-87ef-fe5214cb9b01
>>>>>> [2018-02-13 08:16:14.087905] E
>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>> quota limits for f8cf47d4-4f54-43c5-ab0d-75b45b4677a3
>>>>>> [2018-02-13 08:16:14.089788] E
>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>> quota limits for b4c81a39-2152-45c5-95d3-b796d88226fe
>>>>>> [2018-02-13 08:16:14.092919] E
>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>> quota limits for 16ac4cde-a5d4-451f-adcc-422a542fea24
>>>>>> [2018-02-13 08:16:14.092980] I [input.c:31:cli_batch] 0-: Exiting with: 0
>>>>>> *** /var/log/glusterfs/bricks/data-myvolume-brick.log ***
>>>>>> [2018-02-13 08:16:13.948065] I [addr.c:182:gf_auth] 0-/data/myvolume/brick:
>>>>>> allowed = "*", received addr = "127.0.0.1"
>>>>>> [2018-02-13 08:16:13.948105] I [login.c:76:gf_auth] 0-auth/login: allowed
>>>>>> user names: bea3e634-e174-4bb3-a1d6-25b09d03b536
>>>>>> [2018-02-13 08:16:13.948125] I [MSGID: 115029]
>>>>>> [server-handshake.c:695:server_setvolume] 0-myvolume-server: accepted client
>>>>>> from gfs1a-14348-2018/02/13-08:16:09:933625-myvolume-client-0-0-0 (version:
>>>>>> 3.10.7)
>>>>>> [2018-02-13 08:16:14.022257] I [MSGID: 115036]
>>>>>> [server.c:559:server_rpc_notify] 0-myvolume-server: disconnecting connection
>>>>>> from gfs1a-14348-2018/02/13-08:16:09:933625-myvolume-client-0-0-0
>>>>>> [2018-02-13 08:16:14.022465] I [MSGID: 101055]
>>>>>> [client_t.c:436:gf_client_unref] 0-myvolume-server: Shutting down connection
>>>>>> gfs1a-14348-2018/02/13-08:16:09:933625-myvolume-client-0-0-0
>>>>>> -------- Original Message --------
>>>>>> On February 13, 2018 12:47 AM, Hari Gowtham hgowtham at redhat.com wrote:
>>>>>> Hi,
>>>>>> Can you provide more information like, the volume configuration, quota.conf
>>>>>> file and the log files.
>>>>>> On Sat, Feb 10, 2018 at 1:05 AM, mabi mabi at protonmail.ch wrote:
>>>>>>>Hello,
>>>>>>> I am running GlusterFS 3.10.7 and just noticed by doing a "gluster volume
>>>>>>> quota <volname> list" that my quotas on that volume are broken. The command
>>>>>>> returns no output and no errors but by looking in /var/log/glusterfs.cli I
>>>>>>> found the following errors:
>>>>>>> [2018-02-09 19:31:24.242324] E
>>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>>> quota limits for 3df709ee-641d-46a2-bd61-889583e3033c
>>>>>>> [2018-02-09 19:31:24.249790] E
>>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>>> quota limits for a27818fe-0248-40fe-bb23-d43d61010478
>>>>>>> [2018-02-09 19:31:24.252378] E
>>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>>> quota limits for daf97388-bcec-4cc0-a8ef-5b93f05b30f6
>>>>>>> [2018-02-09 19:31:24.256775] E
>>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>>> quota limits for 3c768b36-2625-4509-87ef-fe5214cb9b01
>>>>>>> [2018-02-09 19:31:24.257434] E
>>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>>> quota limits for f8cf47d4-4f54-43c5-ab0d-75b45b4677a3
>>>>>>> [2018-02-09 19:31:24.259126] E
>>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>>> quota limits for b4c81a39-2152-45c5-95d3-b796d88226fe
>>>>>>> [2018-02-09 19:31:24.261664] E
>>>>>>> [cli-cmd-volume.c:1674:cli_cmd_quota_handle_list_all] 0-cli: Failed to get
>>>>>>> quota limits for 16ac4cde-a5d4-451f-adcc-422a542fea24
>>>>>>> [2018-02-09 19:31:24.261719] I [input.c:31:cli_batch] 0-: Exiting with: 0
>>>>>>> How can I fix my quota on that volume again? I had around 30 quotas set on
>>>>>>> different directories of that volume.
>>>>>>> Thanks in advance.
>>>>>>> Regards,
>>>>>>> M.
>>>>>>> Gluster-users mailing list
>>>>>>>Gluster-users at gluster.org
>>>>>>>http://lists.gluster.org/mailman/listinfo/gluster-users
>>>>>>> Regards,
>>>>>>> Hari Gowtham.
>>>>>>> Regards,
>>>>>>> Hari Gowtham.
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>>
>>
>>
>>Regards,
>> Hari Gowtham.
>>
>
--
Regards,
Hari Gowtham.
More information about the Gluster-users
mailing list