[Gluster-users] [ovirt-users] ovirt 4.1 hosted engine hyper converged on glusterfs 3.8.10 : "engine" storage domain alway complain about "unsynced" elements

Fri Jul 21 18:11:10 UTC 2017

Hi,

Sorry for follow up again, but, checking the ovirt interface I've found
that ovirt report the "engine" volume as an "arbiter" configuration and the
"data" volume as full replicated volume. Check these screenshots:

https://drive.google.com/drive/folders/0ByUV7xQtP1gCTE8tUTFfVmR5aDQ?usp=sharing

But the "gluster volume info" command report that all 2 volume are full
replicated:

*Volume Name: data*
*Type: Replicate*
*Volume ID: c7a5dfc9-3e72-4ea1-843e-c8275d4a7c2d*
*Status: Started*
*Snapshot Count: 0*
*Number of Bricks: 1 x 3 = 3*
*Transport-type: tcp*
*Bricks:*
*Brick1: gdnode01:/gluster/data/brick*
*Brick2: gdnode02:/gluster/data/brick*
*Brick3: gdnode04:/gluster/data/brick*
*Options Reconfigured:*
*nfs.disable: on*
*performance.readdir-ahead: on*
*transport.address-family: inet*
*storage.owner-uid: 36*
*performance.quick-read: off*
*performance.read-ahead: off*
*performance.io-cache: off*
*performance.stat-prefetch: off*
*performance.low-prio-threads: 32*
*network.remote-dio: enable*
*cluster.eager-lock: enable*
*cluster.quorum-type: auto*
*cluster.server-quorum-type: server*
*cluster.data-self-heal-algorithm: full*
*cluster.locking-scheme: granular*
*cluster.shd-max-threads: 8*
*cluster.shd-wait-qlength: 10000*
*features.shard: on*
*user.cifs: off*
*storage.owner-gid: 36*
*features.shard-block-size: 512MB*
*network.ping-timeout: 30*
*performance.strict-o-direct: on*
*cluster.granular-entry-heal: on*
*auth.allow: **
*server.allow-insecure: on*

*Volume Name: engine*
*Type: Replicate*
*Volume ID: d19c19e3-910d-437b-8ba7-4f2a23d17515*
*Status: Started*
*Snapshot Count: 0*
*Number of Bricks: 1 x 3 = 3*
*Transport-type: tcp*
*Bricks:*
*Brick1: gdnode01:/gluster/engine/brick*
*Brick2: gdnode02:/gluster/engine/brick*
*Brick3: gdnode04:/gluster/engine/brick*
*Options Reconfigured:*
*nfs.disable: on*
*performance.readdir-ahead: on*
*transport.address-family: inet*
*storage.owner-uid: 36*
*performance.quick-read: off*
*performance.read-ahead: off*
*performance.io-cache: off*
*performance.stat-prefetch: off*
*performance.low-prio-threads: 32*
*network.remote-dio: off*
*cluster.eager-lock: enable*
*cluster.quorum-type: auto*
*cluster.server-quorum-type: server*
*cluster.data-self-heal-algorithm: full*
*cluster.locking-scheme: granular*
*cluster.shd-max-threads: 8*
*cluster.shd-wait-qlength: 10000*
*features.shard: on*
*user.cifs: off*
*storage.owner-gid: 36*
*features.shard-block-size: 512MB*
*network.ping-timeout: 30*
*performance.strict-o-direct: on*
*cluster.granular-entry-heal: on*
*auth.allow: **

          server.allow-insecure: on

2017-07-21 19:13 GMT+02:00 yayo (j) <jaganz at gmail.com>:

> 2017-07-20 14:48 GMT+02:00 Ravishankar N <ravishankar at redhat.com>:
>
>>
>> But it does  say something. All these gfids of completed heals in the log
>> below are the for the ones that you have given the getfattr output of. So
>> what is likely happening is there is an intermittent connection problem
>> between your mount and the brick process, leading to pending heals again
>> after the heal gets completed, which is why the numbers are varying each
>> time. You would need to check why that is the case.
>> Hope this helps,
>> Ravi
>>
>>
>>
>> *[2017-07-20 09:58:46.573079] I [MSGID: 108026]
>> [afr-self-heal-common.c:1254:afr_log_selfheal] 0-engine-replicate-0:
>> Completed data selfheal on e6dfd556-340b-4b76-b47b-7b6f5bd74327.
>> sources=[0] 1  sinks=2*
>> *[2017-07-20 09:59:22.995003] I [MSGID: 108026]
>> [afr-self-heal-metadata.c:51:__afr_selfheal_metadata_do]
>> 0-engine-replicate-0: performing metadata selfheal on
>> f05b9742-2771-484a-85fc-5b6974bcef81*
>> *[2017-07-20 09:59:22.999372] I [MSGID: 108026]
>> [afr-self-heal-common.c:1254:afr_log_selfheal] 0-engine-replicate-0:
>> Completed metadata selfheal on f05b9742-2771-484a-85fc-5b6974bcef81.
>> sources=[0] 1  sinks=2*
>>
>>
>
> Hi,
>
> following your suggestion, I've checked the "peer" status and I found that
> there is too many name for the hosts, I don't know if this can be the
> problem or part of it:
>
> *gluster peer status on NODE01:*
> *Number of Peers: 2*
>
> *Hostname: dnode02.localdomain.local*
> *Uuid: 7c0ebfa3-5676-4d3f-9bfa-7fff6afea0dd*
> *State: Peer in Cluster (Connected)*
> *Other names:*
> *192.168.10.52*
> *dnode02.localdomain.local*
> *10.10.20.90*
> *10.10.10.20*
>
>
>
>
> *gluster peer status on NODE02:*
> *Number of Peers: 2*
>
> *Hostname: dnode01.localdomain.local*
> *Uuid: a568bd60-b3e4-4432-a9bc-996c52eaaa12*
> *State: Peer in Cluster (Connected)*
> *Other names:*
> *gdnode01*
> *10.10.10.10*
>
> *Hostname: gdnode04*
> *Uuid: ce6e0f6b-12cf-4e40-8f01-d1609dfc5828*
> *State: Peer in Cluster (Connected)*
> *Other names:*
> *192.168.10.54*
> *10.10.10.40*
>
>
> *gluster peer status on NODE04:*
> *Number of Peers: 2*
>
> *Hostname: dnode02.neridom.dom*
> *Uuid: 7c0ebfa3-5676-4d3f-9bfa-7fff6afea0dd*
> *State: Peer in Cluster (Connected)*
> *Other names:*
> *10.10.20.90*
> *gdnode02*
> *192.168.10.52*
> *10.10.10.20*
>
> *Hostname: dnode01.localdomain.local*
> *Uuid: a568bd60-b3e4-4432-a9bc-996c52eaaa12*
> *State: Peer in Cluster (Connected)*
> *Other names:*
> *gdnode01*
> *10.10.10.10*
>
>
>
> All these ip are pingable and hosts resolvible across all 3 nodes but,
> only the 10.10.10.0 network is the decidated network for gluster  (rosolved
> using gdnode* host names) ... You think that remove other entries can fix
> the problem? So, sorry, but, how can I remove other entries?
>
> And, what about the selinux?
>
> Thank you
>
>
>

-- 
Linux User: 369739 http://counter.li.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20170721/dd798c83/attachment.html>