[Gluster-users] Very slow performance on Sharded GlusterFS

Mon Jul 10 14:29:09 UTC 2017

Hi Krutika,

May I kindly ping to you and ask that If you have any idea yet or figured out whats the issue may?

I am awaiting your reply with four eyes :)

Apologies for the ping :)

-Gencer.

From: gluster-users-bounces at gluster.org [mailto:gluster-users-bounces at gluster.org] On Behalf Of gencer at gencgiyen.com
Sent: Thursday, July 6, 2017 11:06 AM
To: 'Krutika Dhananjay' <kdhananj at redhat.com>
Cc: 'gluster-user' <gluster-users at gluster.org>
Subject: Re: [Gluster-users] Very slow performance on Sharded GlusterFS

Hi Krutika,

I also did one more test. I re-created another volume (single volume. Old one destroyed-deleted) then do 2 dd tests. One for 1GB other for 2GB. Both are 32MB shard and eager-lock off.

Samples:

sr:~# gluster volume profile testvol start

Starting volume profile on testvol has been successful

sr:~# dd if=/dev/zero of=/testvol/dtestfil0xb bs=1G count=1

1+0 records in

1+0 records out

1073741824 bytes (1.1 GB, 1.0 GiB) copied, 12.2708 s, 87.5 MB/s

sr:~# gluster volume profile testvol info > /32mb_shard_and_1gb_dd.log

sr:~# gluster volume profile testvol stop

Stopping volume profile on testvol has been successful

sr:~# gluster volume profile testvol start

Starting volume profile on testvol has been successful

sr:~# dd if=/dev/zero of=/testvol/dtestfil0xb bs=1G count=2

2+0 records in

2+0 records out

2147483648 bytes (2.1 GB, 2.0 GiB) copied, 23.5457 s, 91.2 MB/s

sr:~# gluster volume profile testvol info > /32mb_shard_and_2gb_dd.log

sr:~# gluster volume profile testvol stop

Stopping volume profile on testvol has been successful

Also here is volume info:

sr:~# gluster volume info testvol

Volume Name: testvol

Type: Distributed-Replicate

Volume ID: 3cc06d95-06e9-41f8-8b26-e997886d7ba1

Status: Started

Snapshot Count: 0

Number of Bricks: 10 x 2 = 20

Transport-type: tcp

Bricks:

Brick1: sr-09-loc-50-14-18:/bricks/brick1

Brick2: sr-10-loc-50-14-18:/bricks/brick1

Brick3: sr-09-loc-50-14-18:/bricks/brick2

Brick4: sr-10-loc-50-14-18:/bricks/brick2

Brick5: sr-09-loc-50-14-18:/bricks/brick3

Brick6: sr-10-loc-50-14-18:/bricks/brick3

Brick7: sr-09-loc-50-14-18:/bricks/brick4

Brick8: sr-10-loc-50-14-18:/bricks/brick4

Brick9: sr-09-loc-50-14-18:/bricks/brick5

Brick10: sr-10-loc-50-14-18:/bricks/brick5

Brick11: sr-09-loc-50-14-18:/bricks/brick6

Brick12: sr-10-loc-50-14-18:/bricks/brick6

Brick13: sr-09-loc-50-14-18:/bricks/brick7

Brick14: sr-10-loc-50-14-18:/bricks/brick7

Brick15: sr-09-loc-50-14-18:/bricks/brick8

Brick16: sr-10-loc-50-14-18:/bricks/brick8

Brick17: sr-09-loc-50-14-18:/bricks/brick9

Brick18: sr-10-loc-50-14-18:/bricks/brick9

Brick19: sr-09-loc-50-14-18:/bricks/brick10

Brick20: sr-10-loc-50-14-18:/bricks/brick10

Options Reconfigured:

cluster.eager-lock: off

features.shard-block-size: 32MB

features.shard: on

transport.address-family: inet

nfs.disable: on

See attached results and sorry for the multiple e-mails. I just want to make sure that I provided correct results for the tests.

Thanks,

Gencer.

From: gluster-users-bounces at gluster.org <mailto:gluster-users-bounces at gluster.org>  [mailto:gluster-users-bounces at gluster.org] On Behalf Of gencer at gencgiyen.com <mailto:gencer at gencgiyen.com> 
Sent: Thursday, July 6, 2017 10:34 AM
To: 'Krutika Dhananjay' <kdhananj at redhat.com <mailto:kdhananj at redhat.com> >
Cc: 'gluster-user' <gluster-users at gluster.org <mailto:gluster-users at gluster.org> >
Subject: Re: [Gluster-users] Very slow performance on Sharded GlusterFS

Krutika, I’m sorry I forgot to add logs. I attached them now.

Thanks,

Gencer.

From: gluster-users-bounces at gluster.org <mailto:gluster-users-bounces at gluster.org>  [mailto:gluster-users-bounces at gluster.org] On Behalf Of gencer at gencgiyen.com <mailto:gencer at gencgiyen.com> 
Sent: Thursday, July 6, 2017 10:27 AM
To: 'Krutika Dhananjay' <kdhananj at redhat.com <mailto:kdhananj at redhat.com> >
Cc: 'gluster-user' <gluster-users at gluster.org <mailto:gluster-users at gluster.org> >
Subject: Re: [Gluster-users] Very slow performance on Sharded GlusterFS

Ki Krutika,

After that setting:

$ dd if=/dev/zero of=/mnt/ddfile bs=1G count=1

1+0 records in

1+0 records out

1073741824 bytes (1.1 GB, 1.0 GiB) copied, 11.7351 s, 91.5 MB/s

$ dd if=/dev/zero of=/mnt/ddfile2 bs=2G count=1

0+1 records in

0+1 records out

2147479552 bytes (2.1 GB, 2.0 GiB) copied, 23.7351 s, 90.5 MB/s

$ dd if=/dev/zero of=/mnt/ddfile3  bs=1G count=1

1+0 records in

1+0 records out

1073741824 bytes (1.1 GB, 1.0 GiB) copied, 12.1202 s, 88.6 MB/s

$ dd if=/dev/zero of=/mnt/ddfile4 bs=1G count=2

2+0 records in

2+0 records out

2147483648 bytes (2.1 GB, 2.0 GiB) copied, 24.7695 s, 86.7 MB/s

I see improvements (from 70-75mb to 90-100mb per second) after eager-lock off setting. Also, I monitoring the bandwidth between two nodes. I see up to 102MB/s.

Is there anything I can do to optimize more? Or is it last stop?

Note: I deleted all files again and reformat then re-create volume with shard then mount it. Tried with 16MB, 32MB and 512MB shard sizes. Results are equal.

Thanks,

Gencer.

From: Krutika Dhananjay [mailto:kdhananj at redhat.com] 
Sent: Thursday, July 6, 2017 3:30 AM
To: gencer at gencgiyen.com <mailto:gencer at gencgiyen.com> 
Cc: gluster-user <gluster-users at gluster.org <mailto:gluster-users at gluster.org> >
Subject: Re: [Gluster-users] Very slow performance on Sharded GlusterFS

What if you disabled eager lock and run your test again on the sharded configuration along with the profile output?

# gluster volume set <VOL> cluster.eager-lock off

-Krutika

On Tue, Jul 4, 2017 at 9:03 PM, Krutika Dhananjay <kdhananj at redhat.com <mailto:kdhananj at redhat.com> > wrote:

Thanks. I think reusing the same volume was the cause of lack of IO distribution.

The latest profile output looks much more realistic and in line with i would expect.

Let me analyse the numbers a bit and get back.

-Krutika

On Tue, Jul 4, 2017 at 12:55 PM, <gencer at gencgiyen.com <mailto:gencer at gencgiyen.com> > wrote:

Hi Krutika,

Thank you so much for myour reply. Let me answer all:

1.	I have no idea why it did not get distributed over all bricks.
2.	Hm.. This is really weird.

And others;

No. I use only one volume. When I tested sharded and striped volumes, I manually stopped volume, deleted volume, purged data (data inside of bricks/disks) and re-create by using this command:

sudo gluster volume create testvol replica 2 sr-09-loc-50-14-18:/bricks/brick1 sr-10-loc-50-14-18:/bricks/brick1 sr-09-loc-50-14-18:/bricks/brick2 sr-10-loc-50-14-18:/bricks/brick2 sr-09-loc-50-14-18:/bricks/brick3 sr-10-loc-50-14-18:/bricks/brick3 sr-09-loc-50-14-18:/bricks/brick4 sr-10-loc-50-14-18:/bricks/brick4 sr-09-loc-50-14-18:/bricks/brick5 sr-10-loc-50-14-18:/bricks/brick5 sr-09-loc-50-14-18:/bricks/brick6 sr-10-loc-50-14-18:/bricks/brick6 sr-09-loc-50-14-18:/bricks/brick7 sr-10-loc-50-14-18:/bricks/brick7 sr-09-loc-50-14-18:/bricks/brick8 sr-10-loc-50-14-18:/bricks/brick8 sr-09-loc-50-14-18:/bricks/brick9 sr-10-loc-50-14-18:/bricks/brick9 sr-09-loc-50-14-18:/bricks/brick10 sr-10-loc-50-14-18:/bricks/brick10 force

and of course after that volume start executed. If shard enabled, I enable that feature BEFORE I start the sharded volume than mount.

I tried converting from one to another but then I saw documentation says clean voluje should be better. So I tried clean method. Still same performance.

Testfile grows from 1GB to 5GB. And tests are dd. See this example:

dd if=/dev/zero of=/mnt/testfile bs=1G count=5

5+0 records in

5+0 records out

5368709120 bytes (5.4 GB, 5.0 GiB) copied, 66.7978 s, 80.4 MB/s

>> dd if=/dev/zero of=/mnt/testfile bs=5G count=1

This also gives same result. (bs and count reversed)

And this example have generated a profile which I also attached to this e-mail.

Is there anything that I can try? I am open to all kind of suggestions.

Thanks,

Gencer.

From: Krutika Dhananjay [mailto:kdhananj at redhat.com <mailto:kdhananj at redhat.com> ] 
Sent: Tuesday, July 4, 2017 9:39 AM

To: gencer at gencgiyen.com <mailto:gencer at gencgiyen.com> 
Cc: gluster-user <gluster-users at gluster.org <mailto:gluster-users at gluster.org> >
Subject: Re: [Gluster-users] Very slow performance on Sharded GlusterFS

Hi Gencer,

I just checked the volume-profile attachments.

Things that seem really odd to me as far as the sharded volume is concerned:

1. Only the replica pair having bricks 5 and 6 on both nodes 09 and 10 seems to have witnessed all the IO. No other bricks witnessed any write operations. This is unacceptable for a volume that has 8 other replica sets. Why didn't the shards get distributed across all of these sets?

2. For replica set consisting of bricks 5 and 6 of node 09, I see that the brick 5 is spending 99% of its time in FINODELK fop, when the fop that should have dominated its profile should have been in fact WRITE.

Could you throw some more light on your setup from gluster standpoint?
* For instance, are you using two different gluster volumes to gather these numbers - one distributed-replicated-striped and another distributed-replicated-sharded? Or are you merely converting a single volume from one type to another?

* And if there are indeed two volumes, could you share both their `volume info` outputs to eliminate any confusion?

* If there's just one volume, are you taking care to remove all data from the mount point of this volume before converting it?

* What is the size the test file grew to?

* These attached profiles are against dd runs? Or the file download test?

-Krutika

On Mon, Jul 3, 2017 at 8:42 PM, <gencer at gencgiyen.com <mailto:gencer at gencgiyen.com> > wrote:

Hi Krutika,

Have you be able to look out my profiles? Do you have any clue, idea or suggestion?

Thanks,

-Gencer

From: Krutika Dhananjay [mailto:kdhananj at redhat.com <mailto:kdhananj at redhat.com> ] 
Sent: Friday, June 30, 2017 3:50 PM

To: gencer at gencgiyen.com <mailto:gencer at gencgiyen.com> 
Cc: gluster-user <gluster-users at gluster.org <mailto:gluster-users at gluster.org> >
Subject: Re: [Gluster-users] Very slow performance on Sharded GlusterFS

Just noticed that the way you have configured your brick order during volume-create makes both replicas of every set reside on the same machine.

That apart, do you see any difference if you change shard-block-size to 512MB? Could you try that?

If it doesn't help, could you share the volume-profile output for both the tests (separate)?

Here's what you do:

1. Start profile before starting your test - it could be dd or it could be file download.

# gluster volume profile <VOL> start

2. Run your test - again either dd or file-download.

3. Once the test has completed, run `gluster volume profile <VOL> info` and redirect its output to a tmp file.

4. Stop profile

# gluster volume profile <VOL> stop

And attach the volume-profile output file that you saved at a temporary location in step 3.

-Krutika

On Fri, Jun 30, 2017 at 5:33 PM, <gencer at gencgiyen.com <mailto:gencer at gencgiyen.com> > wrote:

Hi Krutika,

Sure, here is volume info:

root at sr-09-loc-50-14-18:/# gluster volume info testvol

Volume Name: testvol

Type: Distributed-Replicate

Volume ID: 30426017-59d5-4091-b6bc-279a905b704a

Status: Started

Snapshot Count: 0

Number of Bricks: 10 x 2 = 20

Transport-type: tcp

Bricks:

Brick1: sr-09-loc-50-14-18:/bricks/brick1

Brick2: sr-09-loc-50-14-18:/bricks/brick2

Brick3: sr-09-loc-50-14-18:/bricks/brick3

Brick4: sr-09-loc-50-14-18:/bricks/brick4

Brick5: sr-09-loc-50-14-18:/bricks/brick5

Brick6: sr-09-loc-50-14-18:/bricks/brick6

Brick7: sr-09-loc-50-14-18:/bricks/brick7

Brick8: sr-09-loc-50-14-18:/bricks/brick8

Brick9: sr-09-loc-50-14-18:/bricks/brick9

Brick10: sr-09-loc-50-14-18:/bricks/brick10

Brick11: sr-10-loc-50-14-18:/bricks/brick1

Brick12: sr-10-loc-50-14-18:/bricks/brick2

Brick13: sr-10-loc-50-14-18:/bricks/brick3

Brick14: sr-10-loc-50-14-18:/bricks/brick4

Brick15: sr-10-loc-50-14-18:/bricks/brick5

Brick16: sr-10-loc-50-14-18:/bricks/brick6

Brick17: sr-10-loc-50-14-18:/bricks/brick7

Brick18: sr-10-loc-50-14-18:/bricks/brick8

Brick19: sr-10-loc-50-14-18:/bricks/brick9

Brick20: sr-10-loc-50-14-18:/bricks/brick10

Options Reconfigured:

features.shard-block-size: 32MB

features.shard: on

transport.address-family: inet

nfs.disable: on

-Gencer.

From: Krutika Dhananjay [mailto:kdhananj at redhat.com <mailto:kdhananj at redhat.com> ] 
Sent: Friday, June 30, 2017 2:50 PM
To: gencer at gencgiyen.com <mailto:gencer at gencgiyen.com> 
Cc: gluster-user <gluster-users at gluster.org <mailto:gluster-users at gluster.org> >
Subject: Re: [Gluster-users] Very slow performance on Sharded GlusterFS

Could you please provide the volume-info output?

-Krutika

On Fri, Jun 30, 2017 at 4:23 PM, <gencer at gencgiyen.com <mailto:gencer at gencgiyen.com> > wrote:

Hi,

I have an 2 nodes with 20 bricks in total (10+10).

First test: 

2 Nodes with Distributed – Striped – Replicated (2 x 2)

10GbE Speed between nodes

“dd” performance: 400mb/s and higher

Downloading a large file from internet and directly to the gluster: 250-300mb/s

Now same test without Stripe but with sharding. This results are same when I set shard size 4MB or 32MB. (Again 2x Replica here)

Dd performance: 70mb/s

Download directly to the gluster performance : 60mb/s

Now, If we do this test twice at the same time (two dd or two doewnload at the same time) it goes below 25/mb each or slower.

I thought sharding is at least equal or a little slower (maybe?) but these results are terribly slow.

I tried tuning (cache, window-size etc..). Nothing helps.

GlusterFS 3.11 and Debian 9 used. Kernel also tuned. Disks are “xfs” and 4TB each.

Is there any tweak/tuning out there to make it fast?

Or is this an expected behavior? If its, It is unacceptable. So slow. I cannot use this on production as it is terribly slow. 

The reason behind I use shard instead of stripe is i would like to eleminate files that bigger than brick size.

Thanks,

Gencer.

_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> 
http://lists.gluster.org/mailman/listinfo/gluster-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20170710/6a695500/attachment.html>