[Gluster-users] RDMA transport problems in GLUSTER on host with MIC

[Anoop C S]

On Fri, 2017-01-20 at 11:53 +0100, Fedele Stabile wrote:
> Thank you for your help, 
> I will answer to your questions:
> 
> Il giorno ven, 20/01/2017 alle 12.58 +0530, Anoop C S ha scritto:
> > On Wed, 2017-01-18 at 12:56 +0100, Fedele Stabile wrote:
> > > Hi,
> > > it happens that RDMA gluster transport does not works anymore
> > > after I have configured ibscif virtual connector for Infiniband in
> > > a
> > > server with a XeonPHI coprocessor.
> > > 
> > > I have CentOS 6.6 and GLUSTER 3.8.5, OFED 3.12-1 MPSS 3.5.2 and I
> > > have
> > > followed the installation instructions of MPSS_Users_Guide
> > > (Revision
> > > 3.5) that suggested to remove
> > > compat-rdma-devel and compat-rdma packages.
> > > 
> > 
> > It would help if you could somehow clearly understand the reason for
> > removing those packages. May be
> > they are critical and not intended to be removed. Please ask for help
> > from OFED.
> > 
> 
> Files of ackages compat-rdma-devel and compat-rdma are substituted by
> others from MPSS package that contains all the Software Stack for
> server and MIC card including ofed drivers.
> 
> > > I have noticed that running the command:
> > > ib_send_bw
> > > gives the following error:
> > > 
> > > # ib_send_bw
> > > 
> > > ************************************
> > > * Waiting for client to connect... *
> > > ************************************
> > > -----------------------------------------------------------------
> > > ----
> > > ------------------
> > >                     Send BW Test
> > >  Dual-port       : OFF        Device         : scif0
> > >  Number of qps   : 1        Transport type : IW
> > >  Connection type : RC        Using SRQ      : OFF
> > >  RX depth        : 512
> > >  CQ Moderation   : 100
> > >  Mtu             : 2048[B]
> > >  Link type       : Ethernet
> > >  Gid index       : 0
> > >  Max inline data : 0[B]
> > >  rdma_cm QPs     : OFF
> > >  Data ex. method : Ethernet
> > > -----------------------------------------------------------------
> > > ----
> > > ------------------
> > >  local address: LID 0x3e8 QPN 0x0003 PSN 0x123123
> > >  GID: 76:121:186:102:03:119:00:00:00:00:00:00:00:00:00:00
> > > ethernet_read_keys: Couldn't read remote address
> > >  Unable to read to socket/rdam_cm
> > > Failed to exchange data between server and clients
> > > 
> > 
> > The above error have nothing to do with GlusterFS. Can you please
> > give more context on what failed
> > for you while trying out GlusterFS with RDMA transport?
> 
> In glusterd.vol.log when I start glusterd I see:
> [rdma.c:4837:gf_rdma_listen] 0-rdma.management: rdma option set failed
> [Funzione non implementata]
> But RDMA is correctly working on qib0 device as you can see below:

Can you please make sure that glusterfs-rdma package is installed on the system? For example:
$ rpm -qa | grep glusterfs-rdma

> > 
> > > Instead using the output of the command
> > > 
> > > ib_send_bw -d qib0
> > > 
> > > gives correct results:
> > > 
> > > # ib_send_bw -d qib0
> > > 
> > > ************************************
> > > * Waiting for client to connect... *
> > > ************************************
> > > -----------------------------------------------------------------
> > > ----
> > > ------------------
> > >                     Send BW Test
> > >  Dual-port       : OFF        Device         : qib0
> > >  Number of qps   : 1        Transport type : IB
> > >  Connection type : RC        Using SRQ      : OFF
> > >  RX depth        : 512
> > >  CQ Moderation   : 100
> > >  Mtu             : 2048[B]
> > >  Link type       : IB
> > >  Max inline data : 0[B]
> > >  rdma_cm QPs     : OFF
> > >  Data ex. method : Ethernet
> > > -----------------------------------------------------------------
> > > ----
> > > ------------------
> > >  local address: LID 0x0a QPN 0x0169 PSN 0xe0b768
> > >  remote address: LID 0x20 QPN 0x28b280 PSN 0xc3008c
> > > -----------------------------------------------------------------
> > > ----
> > > ------------------
> > >  #bytes     #iterations    BW peak[MB/sec]    BW
> > > average[MB/sec]   MsgRate[Mpps]
> > >  65536      1000             0.00               2160.87           0
> > > .034
> > > 574
> > > -----------------------------------------------------------------
> > > ----
> > > ------------------
> > > _______________________________________________
> > > Gluster-users mailing list
> > > Gluster-users at gluster.org
> > > http://lists.gluster.org/mailman/listinfo/gluster-users
> > 
> > 
> 
>