[Gluster-users] Quotas not working after adding arbiter brick to replica 2

Mon Aug 7 08:54:03 UTC 2017

It will be fixed in 3.11

On Fri, Aug 4, 2017 at 7:30 PM, mabi <mabi at protonmail.ch> wrote:

> Thank you very much Sanoj, I ran your script once and it worked. I now
> have quotas again...
>
> Question: do you know in which release this issue will be fixed?
>
>
>
> -------- Original Message --------
> Subject: Re: [Gluster-users] Quotas not working after adding arbiter brick
> to replica 2
> Local Time: August 4, 2017 3:28 PM
> UTC Time: August 4, 2017 1:28 PM
> From: sunnikri at redhat.com
> To: mabi <mabi at protonmail.ch>
> Gluster Users <gluster-users at gluster.org>
>
> Hi mabi,
> This is a likely issue where the last gfid entry in the quota.conf file is
> stale (because the directory was deleted with quota limit on it being
> removed)
> (https://review.gluster.org/#/c/16507/)
>
> To fix the issue, we need to remove the last entry (last 17 bytes/ 16bytes
> based on quota version) in the file.
> Please use the below work around for the same until next upgrade.
> you only need to change $vol to the name of volume.
>
> ===============================
> vol=<v5>
> qconf=/var/lib/glusterd/vols/$vol/quota.conf
> qconf_bk="$qconf".bk
> cp $qconf $qconf_bk
>
> grep "GlusterFS Quota conf | version: v1.2" /var/lib/glusterd/vols/v5/
> quota.conf
> if [ $? -eq 0 ];
> then
>         entry_size=17;
> else
>         entry_size=16;
> fi
>
> size=`ls -l $qconf | awk '{print $5}'`
> (( size_new = size - entry_size ))
> dd if=$qconf_bk of=$qconf bs=1 count=$size_new
> gluster v quota v5 list
> ====================================
> In the unlikely case that there are multiple stale entries in the end of
> file you may have to run it multiple times
> to fix the issue (each time one stale entry at the end is removed)
>
>
> On Thu, Aug 3, 2017 at 1:17 PM, mabi <mabi at protonmail.ch> wrote:
>
>> I tried to re-create manually my quotas but not even that works now.
>> Running the "limit-usage" command as showed below returns success:
>>
>> $ sudo gluster volume quota myvolume limit-usage /userdirectory 50GB
>> volume quota : success
>>
>>
>>
>> but when I list the quotas using "list" nothing appears.
>>
>> What can I do to fix that issue with the quotas?
>>
>> -------- Original Message --------
>> Subject: Re: [Gluster-users] Quotas not working after adding arbiter
>> brick to replica 2
>> Local Time: August 2, 2017 2:35 PM
>> UTC Time: August 2, 2017 12:35 PM
>> From: mabi at protonmail.ch
>> To: Sanoj Unnikrishnan <sunnikri at redhat.com>
>> Gluster Users <gluster-users at gluster.org>
>>
>> Hi Sanoj,
>>
>> I copied over the quota.conf file from the affected volume (node 1) and
>> opened it up with a hex editor but can not recognize anything really except
>> for the first few header/version bytes. I have attached it within this mail
>> (compressed with bzip2) as requested.
>>
>> Should I recreate them manually? there where around 10 of them. Or is
>> there a hope of recovering these quotas?
>>
>> Regards,
>> M.
>>
>>
>>
>> -------- Original Message --------
>> Subject: Re: [Gluster-users] Quotas not working after adding arbiter
>> brick to replica 2
>> Local Time: August 2, 2017 1:06 PM
>> UTC Time: August 2, 2017 11:06 AM
>> From: sunnikri at redhat.com
>> To: mabi <mabi at protonmail.ch>
>> Gluster Users <gluster-users at gluster.org>
>>
>> Mabi,
>>
>> We have fixed a couple of issues in the quota list path.
>> Could you also please attach the quota.conf file
>> (/var/lib/glusterd/vols/patchy/quota.conf)
>> (Ideally, the first few bytes would be ascii characters followed by 17
>> bytes per directory on which quota limit is set)
>> Regards,
>> Sanoj
>>
>> On Tue, Aug 1, 2017 at 1:36 PM, mabi <mabi at protonmail.ch> wrote:
>>
>>> I also just noticed quite a few of the following warning messages in the
>>> quotad.log log file:
>>>
>>> [2017-08-01 07:59:27.834202] W [MSGID: 108027]
>>> [afr-common.c:2496:afr_discover_done] 0-myvolume-replicate-0: no read
>>> subvols for (null)
>>>
>>>
>>>
>>>
>>> -------- Original Message --------
>>> Subject: [Gluster-users] Quotas not working after adding arbiter brick
>>> to replica 2
>>> Local Time: August 1, 2017 8:49 AM
>>> UTC Time: August 1, 2017 6:49 AM
>>> From: mabi at protonmail.ch
>>> To: Gluster Users <gluster-users at gluster.org>
>>>
>>> Hello,
>>>
>>> As you might have read in my previous post on the mailing list I have
>>> added an arbiter node to my GlusterFS 3.8.11 replica 2 volume. After some
>>> healing issues and help of Ravi that could get fixed but now I just noticed
>>> that my quotas are all gone.
>>>
>>> When I run the following command:
>>>
>>> glusterfs volume quota myvolume list
>>>
>>> There is no output...
>>>
>>> In the /var/log/glusterfs/quotad.log I can see the following two lines
>>> when running the list command:
>>>
>>> [2017-08-01 06:46:04.451765] W [dict.c:581:dict_unref]
>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.8.11/xlator/features/quotad.so(+0x1f3d)
>>> [0x7fe868e21f3d] -->/usr/lib/x86_64-linux-gnu/g
>>> lusterfs/3.8.11/xlator/features/quotad.so(+0x2d82) [0x7fe868e22d82]
>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>> [0x7fe86f5c2b10] ) 0-dict: dict is NULL [Invalid argument]
>>> [2017-08-01 06:46:04.459154] W [dict.c:581:dict_unref]
>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.8.11/xlator/features/quotad.so(+0x1f3d)
>>> [0x7fe868e21f3d] -->/usr/lib/x86_64-linux-gnu/g
>>> lusterfs/3.8.11/xlator/features/quotad.so(+0x2d82) [0x7fe868e22d82]
>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>> [0x7fe86f5c2b10] ) 0-dict: dict is NULL [Invalid argument]
>>>
>>> In case you need this info, I have added by arbiter node to the replica
>>> 2 by using this command:
>>>
>>> gluster volume add-brick myvolume replica 3 arbiter 1
>>> arbiternode.domain.tld:/srv/glusterfs/myvolume/brick
>>>
>>>
>>>
>>> How can I get my quotas back working as before? I had defined around 20
>>> quotas on different directories of that volume.
>>>
>>> Regards,
>>> Mabi
>>>
>>>
>>>
>>> _______________________________________________
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org
>>> http://lists.gluster.org/mailman/listinfo/gluster-users
>>>
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20170807/4f710093/attachment.html>