[Gluster-users] 答复: 答复: 答复: geo-replication status partial faulty

vyyy杨雨阳 yuyangyang at Ctrip.com
Thu May 19 08:45:34 UTC 2016


I have checked all the nodes both on masters and slaves, the software is the same.

I am puzzled why there were half masters work, halt faulty.


[admin at SVR6996HW2285 ~]$ rpm -qa |grep gluster
glusterfs-api-3.6.3-1.el6.x86_64
glusterfs-fuse-3.6.3-1.el6.x86_64
glusterfs-geo-replication-3.6.3-1.el6.x86_64
glusterfs-3.6.3-1.el6.x86_64
glusterfs-cli-3.6.3-1.el6.x86_64
glusterfs-server-3.6.3-1.el6.x86_64
glusterfs-libs-3.6.3-1.el6.x86_64




Best Regards
杨雨阳 Yuyang Yang

OPS
Ctrip Infrastructure Service (CIS)
Ctrip Computer Technology (Shanghai) Co., Ltd
Phone: + 86 21 34064880-15554 | Fax: + 86 21 52514588-13389
Web: www.Ctrip.com<http://www.ctrip.com/>



发件人: Saravanakumar Arumugam [mailto:sarumuga at redhat.com]
发送时间: Thursday, May 19, 2016 4:33 PM
收件人: vyyy杨雨阳 <yuyangyang at Ctrip.com>; Gluster-users at gluster.org; Aravinda Vishwanathapura Krishna Murthy <avishwan at redhat.com>; Kotresh Hiremath Ravishankar <khiremat at redhat.com>
主题: Re: 答复: [Gluster-users] 答复: geo-replication status partial faulty

Hi,
+geo-rep team.

Can you get the gluster version you are using?

# For example:
rpm -qa | grep gluster

I hope you have same gluster version installed everywhere.
Please double check and share the same.

Thanks,
Saravana
On 05/19/2016 01:37 PM, vyyy杨雨阳 wrote:
Hi, Saravana

I have changed log level to DEBUG. Then start geo-replication with log-file option, attached the file.

gluster volume geo-replication filews glusterfs01.sh3.ctripcorp.com::filews_slave start --log-file=geo.log

I have checked  /root/.ssh/authorized_keys in glusterfs01.sh3.ctripcorp.com , It  have entries in /var/lib/glusterd/geo-replication/common_secret.pem.pub.  and I have removed the lines not started with “command=”

ssh -i /var/lib/glusterd/geo-replication/secret.pem  root@ glusterfs01.sh3.ctripcorp.com
I can see gsyncd messages and no ssh error.


Attached etc-glusterfs-glusterd.vol.log from faulty node, it shows :

[2016-05-19 06:39:23.405974] I [glusterd-geo-rep.c:3516:glusterd_read_status_file] 0-: Using passed config template(/var/lib/glusterd/geo-replication/filews_glusterfs01.sh3.ctripcorp.com_filews_slave/gsyncd.conf).
[2016-05-19 06:39:23.541169] E [glusterd-geo-rep.c:3200:glusterd_gsync_read_frm_status] 0-: Unable to read gsyncd status file
[2016-05-19 06:39:23.541210] E [glusterd-geo-rep.c:3603:glusterd_read_status_file] 0-: Unable to read the statusfile for /export/sdb/filews brick for  filews(master), glusterfs01.sh3.ctripcorp.com::filews_slave(slave) session
[2016-05-19 06:39:29.472047] I [glusterd-geo-rep.c:1835:glusterd_get_statefile_name] 0-: Using passed config template(/var/lib/glusterd/geo-replication/filews_glusterfs01.sh3.ctripcorp.com_filews_slave/gsyncd.conf).
[2016-05-19 06:39:34.939709] I [glusterd-geo-rep.c:3516:glusterd_read_status_file] 0-: Using passed config template(/var/lib/glusterd/geo-replication/filews_glusterfs01.sh3.ctripcorp.com_filews_slave/gsyncd.conf).
[2016-05-19 06:39:35.058520] E [glusterd-geo-rep.c:3200:glusterd_gsync_read_frm_status] 0-: Unable to read gsyncd status file


/var/log/glusterfs/geo-replication/filews/ ssh%3A%2F%2Froot%4010.15.65.66%3Agluster%3A%2F%2F127.0.0.1%3Afilews_slave.log  shows as following:

[2016-05-19 15:11:37.307755] I [monitor(monitor):215:monitor] Monitor: ------------------------------------------------------------
[2016-05-19 15:11:37.308059] I [monitor(monitor):216:monitor] Monitor: starting gsyncd worker
[2016-05-19 15:11:37.423320] D [gsyncd(agent):627:main_i] <top>: rpc_fd: '7,11,10,9'
[2016-05-19 15:11:37.423882] I [changelogagent(agent):72:__init__] ChangelogAgent: Agent listining...
[2016-05-19 15:11:37.423906] I [monitor(monitor):267:monitor] Monitor: worker(/export/sdb/filews) died before establishing connection
[2016-05-19 15:11:37.424151] I [repce(agent):92:service_loop] RepceServer: terminating on reaching EOF.
[2016-05-19 15:11:37.424335] I [syncdutils(agent):214:finalize] <top>: exiting.






Best Regards
Yuyang Yang





发 件人: Saravanakumar Arumugam [mailto:sarumuga at redhat.com]
发送时间: Thursday, May 19, 2016 1:59 PM
收件人: vyyy杨雨阳 <yuyangyang at Ctrip.com><mailto:yuyangyang at Ctrip.com>; Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
主题: Re: [Gluster-users] 答复: geo-replication status partial faulty

Hi,

There seems to be some issue in glusterfs01.sh3.ctripcorp.com slave node.
Can you share the complete logs ?

You can increase verbosity of debug messages like this:
gluster volume geo-replication <master volume> <slave host>::<slave volume> config log-level DEBUG


Also, check  /root/.ssh/authorized_keys in glusterfs01.sh3.ctripcorp.com
It should have entries in /var/lib/glusterd/geo-replication/common_secret.pem.pub (present in master node).

Have a look at this one for example:
https://www.gluster.org/pipermail/gluster-users/2015-August/023174.html

Thanks,
Saravana
On 05/19/2016 07:53 AM, vyyy杨雨阳 wrote:
Hello,

I have tried to config a geo-replication volume , all the master nodes configuration are the same, When I start this volume, the status shows partial faulty as following:

gluster volume geo-replication filews glusterfs01.sh3.ctripcorp.com::filews_slave status

MASTER NODE      MASTER VOL    MASTER BRICK          SLAVE                                          STATUS     CHECKPOINT STATUS    CRAWL STATUS
-------------------------------------------------------------------------------------------------------------------------------------------------
SVR8048HW2285    filews        /export/sdb/filews    glusterfs01.sh3.ctripcorp.com::filews_slave    faulty     N/A                  N/A
SVR8050HW2285    filews        /export/sdb/filews    glusterfs03.sh3.ctripcorp.com::filews_slave    Passive    N/A                  N/A
SVR8047HW2285    filews        /export/sdb/filews    glusterfs01.sh3.ctripcorp.com::filews_slave    Active     N/A                  Hybrid Crawl
SVR8049HW2285    filews        /export/sdb/filews    glusterfs05.sh3.ctripcorp.com::filews_slave    Active     N/A                  Hybrid Crawl
SH02SVR5951      filews        /export/sdb/brick1    glusterfs06.sh3.ctripcorp.com::filews_slave    Passive    N/A                  N/A
SH02SVR5953      filews        /export/sdb/brick1    glusterfs01.sh3.ctripcorp.com::filews_slave    faulty     N/A                  N/A
SVR6995HW2285    filews        /export/sdb/filews    glusterfs01.sh3.ctripcorp.com::filews_slave    faulty     N/A                  N/A
SH02SVR5954      filews        /export/sdb/brick1    glusterfs01.sh3.ctripcorp.com::filews_slave    faulty     N/A                  N/A
SVR6994HW2285    filews        /export/sdb/filews    glusterfs02.sh3.ctripcorp.com::filews_slave    Passive    N/A                  N/A
SVR6993HW2285    filews        /export/sdb/filews    glusterfs01.sh3.ctripcorp.com::filews_slave    faulty     N/A                  N/A
SH02SVR5952      filews        /export/sdb/brick1    glusterfs01.sh3.ctripcorp.com::filews_slave    faulty     N/A                  N/A
SVR6996HW2285    filews        /export/sdb/filews    glusterfs04.sh3.ctripcorp.com::filews_slave    Passive    N/A                  N/A

On the faulty node, log file /var/log/glusterfs/geo-replication/filews shows worker(/export/sdb/filews) died before establishing connection

[2016-05-18 16:55:46.402622] I [monitor(monitor):215:monitor] Monitor: ------------------------------------------------------------
[2016-05-18 16:55:46.402930] I [monitor(monitor):216:monitor] Monitor: starting gsyncd worker
[2016-05-18 16:55:46.517460] I [changelogagent(agent):72:__init__] ChangelogAgent: Agent listining...
[2016-05-18 16:55:46.518066] I [repce(agent):92:service_loop] RepceServer: terminating on reaching EOF.
[2016-05-18 16:55:46.518279] I [syncdutils(agent):214:finalize] <top>: exiting.
[2016-05-18 16:55:46.518194] I [monitor(monitor):267:monitor] Monitor: worker(/export/sdb/filews) died before establishing connection
[2016-05-18 16:55:56.697036] I [monitor(monitor):215:monitor] Monitor: ------------------------------------------------------------

Any advice and suggestions will be greatly appreciated.





Best Regards
������ Yuyang Yang







_______________________________________________

Gluster-users mailing list

Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>

http://www.gluster.org/mailman/listinfo/gluster-users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160519/d881cd04/attachment.html>


More information about the Gluster-users mailing list