[Gluster-users] 答复: 答复: geo-replication status partial faulty
Saravanakumar Arumugam
sarumuga at redhat.com
Thu May 19 08:33:18 UTC 2016
Hi,
+geo-rep team.
Can you get the gluster version you are using?
# For example:
rpm -qa | grep gluster
I hope you have same gluster version installed everywhere.
Please double check and share the same.
Thanks,
Saravana
On 05/19/2016 01:37 PM, vyyy杨雨阳 wrote:
>
> Hi, Saravana
>
> I have changed log level to DEBUG. Then start geo-replication with
> log-file option, attached the file.
>
> gluster volume geo-replication filews
> glusterfs01.sh3.ctripcorp.com::filews_slave start --log-file=geo.log
>
> I have checked /root/.ssh/authorized_keys in
> glusterfs01.sh3.ctripcorp.com, It have entries in
> /var/lib/glusterd/geo-replication/common_secret.pem.pub. and I have
> removed the lines not started with “command=”
>
> ssh -i /var/lib/glusterd/geo-replication/secret.pem root@
> glusterfs01.sh3.ctripcorp.com
>
> I can see gsyncd messages and no ssh error.
>
> Attached etc-glusterfs-glusterd.vol.log from faulty node, it shows :
>
> [2016-05-19 06:39:23.405974] I
> [glusterd-geo-rep.c:3516:glusterd_read_status_file] 0-: Using passed
> config
> template(/var/lib/glusterd/geo-replication/filews_glusterfs01.sh3.ctripcorp.com_filews_slave/gsyncd.conf).
>
> [2016-05-19 06:39:23.541169] E
> [glusterd-geo-rep.c:3200:glusterd_gsync_read_frm_status] 0-: Unable to
> read gsyncd status file
>
> [2016-05-19 06:39:23.541210] E
> [glusterd-geo-rep.c:3603:glusterd_read_status_file] 0-: Unable to read
> the statusfile for /export/sdb/filews brick for filews(master),
> glusterfs01.sh3.ctripcorp.com::filews_slave(slave) session
>
> [2016-05-19 06:39:29.472047] I
> [glusterd-geo-rep.c:1835:glusterd_get_statefile_name] 0-: Using passed
> config
> template(/var/lib/glusterd/geo-replication/filews_glusterfs01.sh3.ctripcorp.com_filews_slave/gsyncd.conf).
>
> [2016-05-19 06:39:34.939709] I
> [glusterd-geo-rep.c:3516:glusterd_read_status_file] 0-: Using passed
> config
> template(/var/lib/glusterd/geo-replication/filews_glusterfs01.sh3.ctripcorp.com_filews_slave/gsyncd.conf).
>
> [2016-05-19 06:39:35.058520] E
> [glusterd-geo-rep.c:3200:glusterd_gsync_read_frm_status] 0-: Unable to
> read gsyncd status file
>
> /var/log/glusterfs/geo-replication/filews/
> ssh%3A%2F%2Froot%4010.15.65.66%3Agluster%3A%2F%2F127.0.0.1%3Afilews_slave.log
> shows as following:
>
> [2016-05-19 15:11:37.307755] I [monitor(monitor):215:monitor] Monitor:
> ------------------------------------------------------------
>
> [2016-05-19 15:11:37.308059] I [monitor(monitor):216:monitor] Monitor:
> starting gsyncd worker
>
> [2016-05-19 15:11:37.423320] D [gsyncd(agent):627:main_i] <top>:
> rpc_fd: '7,11,10,9'
>
> [2016-05-19 15:11:37.423882] I [changelogagent(agent):72:__init__]
> ChangelogAgent: Agent listining...
>
> [2016-05-19 15:11:37.423906] I [monitor(monitor):267:monitor] Monitor:
> worker(/export/sdb/filews) died before establishing connection
>
> [2016-05-19 15:11:37.424151] I [repce(agent):92:service_loop]
> RepceServer: terminating on reaching EOF.
>
> [2016-05-19 15:11:37.424335] I [syncdutils(agent):214:finalize] <top>:
> exiting.
>
> Best Regards **
>
> *Yuyang Yang***
>
> *发 件人**:*Saravanakumar Arumugam [mailto:sarumuga at redhat.com]
> *发送时间:* Thursday, May 19, 2016 1:59 PM
> *收件人:* vyyy杨雨阳 <yuyangyang at Ctrip.com>; Gluster-users at gluster.org
> *主题:* Re: [Gluster-users] 答复: geo-replication status partial faulty
>
> Hi,
>
> There seems to be some issue in glusterfs01.sh3.ctripcorp.com slave node.
> Can you share the complete logs ?
>
> You can increase verbosity of debug messages like this:
> gluster volume geo-replication <master volume> <slave host>::<slave
> volume> config log-level DEBUG
>
>
> Also, check /root/.ssh/authorized_keys in glusterfs01.sh3.ctripcorp.com
> It should have entries in
> /var/lib/glusterd/geo-replication/common_secret.pem.pub (present in
> master node).
>
> Have a look at this one for example:
> https://www.gluster.org/pipermail/gluster-users/2015-August/023174.html
>
> Thanks,
> Saravana
>
> On 05/19/2016 07:53 AM, vyyy杨雨阳 wrote:
>
> Hello,
>
> I have tried to config a geo-replication volume , all the master
> nodes configuration are the same, When I start this volume, the
> status shows partial faulty as following:
>
> gluster volume geo-replication filews
> glusterfs01.sh3.ctripcorp.com::filews_slave status
>
> MASTER NODE MASTER VOL MASTER BRICK
> SLAVE STATUS CHECKPOINT
> STATUS CRAWL STATUS
>
> -------------------------------------------------------------------------------------------------------------------------------------------------
>
> SVR8048HW2285 filews /export/sdb/filews
> glusterfs01.sh3.ctripcorp.com::filews_slave faulty
> N/A N/A
>
> SVR8050HW2285 filews /export/sdb/filews
> glusterfs03.sh3.ctripcorp.com::filews_slave Passive
> N/A N/A
>
> SVR8047HW2285 filews /export/sdb/filews
> glusterfs01.sh3.ctripcorp.com::filews_slave Active
> N/A Hybrid Crawl
>
> SVR8049HW2285 filews /export/sdb/filews
> glusterfs05.sh3.ctripcorp.com::filews_slave Active
> N/A Hybrid Crawl
>
> SH02SVR5951 filews /export/sdb/brick1
> glusterfs06.sh3.ctripcorp.com::filews_slave Passive
> N/A N/A
>
> SH02SVR5953 filews /export/sdb/brick1
> glusterfs01.sh3.ctripcorp.com::filews_slave faulty
> N/A N/A
>
> SVR6995HW2285 filews /export/sdb/filews
> glusterfs01.sh3.ctripcorp.com::filews_slave faulty
> N/A N/A
>
> SH02SVR5954 filews /export/sdb/brick1
> glusterfs01.sh3.ctripcorp.com::filews_slave faulty
> N/A N/A
>
> SVR6994HW2285 filews /export/sdb/filews
> glusterfs02.sh3.ctripcorp.com::filews_slave Passive
> N/A N/A
>
> SVR6993HW2285 filews /export/sdb/filews
> glusterfs01.sh3.ctripcorp.com::filews_slave faulty
> N/A N/A
>
> SH02SVR5952 filews /export/sdb/brick1
> glusterfs01.sh3.ctripcorp.com::filews_slave faulty
> N/A N/A
>
> SVR6996HW2285 filews /export/sdb/filews
> glusterfs04.sh3.ctripcorp.com::filews_slave Passive
> N/A N/A
>
> On the faulty node, log file
> /var/log/glusterfs/geo-replication/filews shows
> worker(/export/sdb/filews) died before establishing connection
>
> [2016-05-18 16:55:46.402622] I [monitor(monitor):215:monitor]
> Monitor: ------------------------------------------------------------
>
> [2016-05-18 16:55:46.402930] I [monitor(monitor):216:monitor]
> Monitor: starting gsyncd worker
>
> [2016-05-18 16:55:46.517460] I [changelogagent(agent):72:__init__]
> ChangelogAgent: Agent listining...
>
> [2016-05-18 16:55:46.518066] I [repce(agent):92:service_loop]
> RepceServer: terminating on reaching EOF.
>
> [2016-05-18 16:55:46.518279] I [syncdutils(agent):214:finalize]
> <top>: exiting.
>
> [2016-05-18 16:55:46.518194] I [monitor(monitor):267:monitor]
> Monitor: worker(/export/sdb/filews) died before establishing
> connection
>
> [2016-05-18 16:55:56.697036] I [monitor(monitor):215:monitor]
> Monitor: ------------------------------------------------------------
>
> Any advice and suggestions will be greatly appreciated.
>
> Best Regards
>
> *������**Yuyang Yang*
>
>
>
>
> _______________________________________________
>
> Gluster-users mailing list
>
> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org>
>
> http://www.gluster.org/mailman/listinfo/gluster-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160519/d2d1417b/attachment.html>
More information about the Gluster-users
mailing list