[Gluster-users] Replicated striped data lose

[David Gossage]

On Sun, Mar 13, 2016 at 8:16 AM, Mahdi Adnan <mahdi.adnan at earthlinktele.com>
wrote:

> Okay so i have enabled shard in my test volume and it did not help,
> stupidly enough, i have enabled it in a production volume
> "Distributed-Replicate" and it currpted  half of my VMs.
> I have updated Gluster to the latest and nothing seems to be changed in my
> situation.
> below the info of my volume;
>

I was pointing at the settings in that email as an example for corruption
fixing. I wouldn't recommend enabling sharding if you haven't gotten the
base working yet on that cluster. What HBA's are you using and what is
layout of filesystem for bricks?


> Number of Bricks: 3 x 2 = 6
> Transport-type: tcp
> Bricks:
> Brick1: gfs001:/bricks/b001/vmware
> Brick2: gfs002:/bricks/b004/vmware
> Brick3: gfs001:/bricks/b002/vmware
> Brick4: gfs002:/bricks/b005/vmware
> Brick5: gfs001:/bricks/b003/vmware
> Brick6: gfs002:/bricks/b006/vmware
> Options Reconfigured:
> performance.strict-write-ordering: on
> cluster.server-quorum-type: server
> cluster.quorum-type: auto
> network.remote-dio: enable
> performance.stat-prefetch: disable
> performance.io-cache: off
> performance.read-ahead: off
> performance.quick-read: off
> cluster.eager-lock: enable
> features.shard-block-size: 16MB
> features.shard: on
> performance.readdir-ahead: off
>
>
> On 03/12/2016 08:11 PM, David Gossage wrote:
>
>
> On Sat, Mar 12, 2016 at 10:21 AM, Mahdi Adnan <
> mahdi.adnan at earthlinktele.com> wrote:
>
>> Both servers have HBA no RAIDs and i can setup a replicated or dispensers
>> without any issues.
>> Logs are clean and when i tried to migrate a vm and got the error,
>> nothing showed up in the logs.
>> i tried mounting the volume into my laptop and it mounted fine but, if i
>> use dd to create a data file it just hang and i cant cancel it, and i cant
>> unmount it or anything, i just have to reboot.
>> The same servers have another volume on other bricks in a distributed
>> replicas, works fine.
>> I have even tried the same setup in a virtual environment (created two
>> vms and install gluster and created a replicated striped) and again same
>> thing, data corruption.
>>
>
> I'd look through mail archives for a topic "Shard in Production" I think
> it's called.  The shard portion may not be relevant but it does discuss
> certain settings that had to be applied with regards to avoiding corruption
> with VM's.  You may want to try and disable the  performance.readdir-ahead
> also.
>
>
>>
>> On 03/12/2016 07:02 PM, David Gossage wrote:
>>
>>
>>
>> On Sat, Mar 12, 2016 at 9:51 AM, Mahdi Adnan <
>> <mahdi.adnan at earthlinktele.com>mahdi.adnan at earthlinktele.com> wrote:
>>
>>> Thanks David,
>>>
>>> My settings are all defaults, i have just created the pool and started
>>> it.
>>> I have set the settings as your recommendation and it seems to be the
>>> same issue;
>>>
>>> Type: Striped-Replicate
>>> Volume ID: 44adfd8c-2ed1-4aa5-b256-d12b64f7fc14
>>> Status: Started
>>> Number of Bricks: 1 x 2 x 2 = 4
>>> Transport-type: tcp
>>> Bricks:
>>> Brick1: gfs001:/bricks/t1/s
>>> Brick2: gfs002:/bricks/t1/s
>>> Brick3: gfs001:/bricks/t2/s
>>> Brick4: gfs002:/bricks/t2/s
>>> Options Reconfigured:
>>> performance.stat-prefetch: off
>>> network.remote-dio: on
>>> cluster.eager-lock: enable
>>> performance.io-cache: off
>>> performance.read-ahead: off
>>> performance.quick-read: off
>>> performance.readdir-ahead: on
>>>
>>
>>
>> Is their a raid controller perhaps doing any caching?
>>
>> In the gluster logs any errors being reported during migration process?
>> Since they aren't in use yet have you tested making just mirrored bricks
>> using different pairings of servers two at a time to see if problem follows
>> certain machine or network ports?
>>
>>
>>
>>>
>>>
>>>
>>>
>>>
>>> On 03/12/2016 03:25 PM, David Gossage wrote:
>>>
>>>
>>>
>>> On Sat, Mar 12, 2016 at 1:55 AM, Mahdi Adnan <
>>> <mahdi.adnan at earthlinktele.com>mahdi.adnan at earthlinktele.com> wrote:
>>>
>>>> Dears,
>>>>
>>>> I have created a replicated striped volume with two bricks and two
>>>> servers but I can't use it because when I mount it in ESXi and try to
>>>> migrate a VM to it, the data get corrupted.
>>>> Is any one have any idea why is this happening ?
>>>>
>>>> Dell 2950 x2
>>>> Seagate 15k 600GB
>>>> CentOS 7.2
>>>> Gluster 3.7.8
>>>>
>>>> Appreciate your help.
>>>>
>>>
>>> Most reports of this I have seen end up being settings related.  Post
>>> gluster volume info. Below is what I have seen as most common recommended
>>> settings.
>>> I'd hazard a guess you may have some the read ahead cache or prefetch on.
>>>
>>> quick-read=off
>>> read-ahead=off
>>> io-cache=off
>>> stat-prefetch=off
>>> eager-lock=enable
>>> remote-dio=on
>>>
>>>>
>>>> Mahdi Adnan
>>>> System Admin
>>>>
>>>>
>>>> _______________________________________________
>>>> Gluster-users mailing list
>>>> Gluster-users at gluster.org
>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>>>
>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160313/76bf8cdc/attachment.html>