[Gluster-users] RAID on GLUSTER node

Pawan Devaiah pawan.devaiah at gmail.com
Mon Jan 18 03:21:11 UTC 2016


Hi Guys,

Sorry I was busy with setting up those 2 machines for GlusterFS
So my machines now have
32 GB memory
7 TB RAID 10 Storage
94 TB Raid 6 Storage

I have setup the initials bricks and cluster is formed and working well.
Although I haven't checked from client side.

I just wanted to ask what should be the idle size of the brick, for now I
have made the entire 7TB volume as one brick, is that ok?
Is there a best practice for brick size?

@ Pranith: Yes for now I want to test this system.

@Mathieu : Even I think it will be perform better with RAID 10 for read
write intensive workloads.

Cheers,
Dev

On Wed, Jan 13, 2016 at 9:05 PM, Mathieu Chateau <mathieu.chateau at lotp.fr>
wrote:

> RAID 10 provide best performance (much better than raid 6)
>
> Cordialement,
> Mathieu CHATEAU
> http://www.lotp.fr
>
> 2016-01-13 5:35 GMT+01:00 Pranith Kumar Karampuri <pkarampu at redhat.com>:
>
>> +gluster-users
>>
>> On 01/13/2016 09:44 AM, Pawan Devaiah wrote:
>>
>> We would be looking for redundancy so replicated volumes I guess
>>
>> If replication is going to be there, why additional RAID10? You can do
>> just RAID6, it saves on space and replication in glusterfs will give
>> redundancy anyways.
>>
>> Pranith
>>
>>
>> Thanks,
>> Dev
>>
>> On Wed, Jan 13, 2016 at 5:07 PM, Pranith Kumar Karampuri <
>> pkarampu at redhat.com> wrote:
>>
>>>
>>>
>>> On 01/13/2016 02:21 AM, Pawan Devaiah wrote:
>>>
>>> Thanks for the response Pranith
>>>
>>> If we take EC out of the equation and say I go with RAID on the physical
>>> disk, do you think GlusterFS is good for the 2 workloads that I mentioned
>>> before.
>>>
>>> Basically it is going to be a NFS storage for VM and data but with
>>> different RAIDs, 10 for VM and 6 for data.
>>>
>>> What will be the kind of volume you will be using with these disks?
>>>
>>> Pranith
>>>
>>> Thanks
>>> Dev
>>>
>>> On Tue, Jan 12, 2016 at 9:46 PM, Pranith Kumar Karampuri <
>>> pkarampu at redhat.com> wrote:
>>>
>>>>
>>>>
>>>> On 01/12/2016 01:26 PM, Pawan Devaiah wrote:
>>>>
>>>> Thanks for your response Pranith and Mathieu,
>>>>
>>>> Pranith: To answer your question, I am planning to use this storage for
>>>> two main workloads.
>>>>
>>>> 1. As a shared storage for VMs.
>>>>
>>>> EC as it is today is not good for this.
>>>>
>>>> 2. As a NFS Storage for files.
>>>>
>>>> If the above is for storing archive data. EC is nice here.
>>>>
>>>> Pranith
>>>>
>>>>
>>>> We are a online backup company so we store few hundred Terra bytes of
>>>> data.
>>>>
>>>>
>>>> Mathieu: I appreciate your concern, however as a system admins
>>>> sometimes we get paranoid and try to control everything under the Sun.
>>>> I know I can only control what I can.
>>>>
>>>> Having said that, No, I have pair of servers to start with so at the
>>>> moment I am just evaluating and preparing for proof of concept, after which
>>>> I am going to propose to my management, if they are happy then we will
>>>> proceed further.
>>>>
>>>> Regards,
>>>> Dev
>>>>
>>>> On Tue, Jan 12, 2016 at 7:30 PM, Mathieu Chateau <
>>>> mathieu.chateau at lotp.fr> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> For any system, 36 disks raise disk failure probability. Do you plan
>>>>> GlusterFS with only one server?
>>>>>
>>>>> You should think about failure at each level and be prepared for it:
>>>>>
>>>>>    - Motherboard failure (full server down)
>>>>>    - Disks failure
>>>>>    - Network cable failure
>>>>>    - File system corruption (time needed for fsck)
>>>>>    - File/folder removed by mistake (backup)
>>>>>
>>>>> Using or not raid depend on your answer on these questions and
>>>>> performance needed.
>>>>> It also depend how "good" is raid controller in your server, like if
>>>>> it has battery and 1GB of cache.
>>>>>
>>>>> When many disks are bought at same time (1 order, serial number close
>>>>> to each other), they may fail in near time to each other (if something bad
>>>>> happened in manufactory).
>>>>> I already saw like 3 disks failing in few days.
>>>>>
>>>>> just my 2 cents,
>>>>>
>>>>>
>>>>>
>>>>> Cordialement,
>>>>> Mathieu CHATEAU
>>>>> http://www.lotp.fr
>>>>>
>>>>> 2016-01-12 4:36 GMT+01:00 Pranith Kumar Karampuri <pkarampu at redhat.com
>>>>> >:
>>>>>
>>>>>>
>>>>>>
>>>>>> On 01/12/2016 04:34 AM, Pawan Devaiah wrote:
>>>>>>
>>>>>> Hi All,
>>>>>>
>>>>>> We have a fairly powerful server sitting at office with 128 Gig RAM
>>>>>> and 36 X 4 TB drives. I am planning to utilize this server as a backend
>>>>>> storage with GlusterFS on it.
>>>>>> I have been doing lot of reading on Glusterfs, but I do not see any
>>>>>> definite recommendation on having RAID on GLUSTER nodes.
>>>>>> Is it recommended to have RAID on GLUSTER nodes specially for the
>>>>>> bricks?
>>>>>> If Yes, is it not contrary to the latest Erasure code implemented in
>>>>>> Gluster or is it still not ready for production environment?
>>>>>> I am happy to implement RAID but my two main concern are
>>>>>> 1. I want to make most of the disk space available.
>>>>>> 2. I am also concerned about the rebuild time after disk failure on
>>>>>> the RAID.
>>>>>>
>>>>>> What is the workload you have?
>>>>>>
>>>>>> We found in our testing that random read/write workload with Erasure
>>>>>> coded volumes is not as good as we get with replication. There are
>>>>>> enhancements in progress at the moment to address these things which we are
>>>>>> yet to merge and re-test.
>>>>>>
>>>>>> Pranith
>>>>>>
>>>>>>
>>>>>> Thanks
>>>>>> Dev
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Gluster-users mailing listGluster-users at gluster.orghttp://www.gluster.org/mailman/listinfo/gluster-users
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Gluster-users mailing list
>>>>>> Gluster-users at gluster.org
>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://www.gluster.org/mailman/listinfo/gluster-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160118/49a33f31/attachment.html>


More information about the Gluster-users mailing list