[Gluster-users] Issue in Adding/Removing the gluster node

ABHISHEK PALIWAL abhishpaliwal at gmail.com
Thu Feb 25 05:10:11 UTC 2016


Hi Gaurav,


Here, I am sharing the log.zip file having logs for both of the nodes and
other logs as well.

Now I think we can analyze the logs and find out the actual problem of this
issue.

Regards,
Abhishek

On Wed, Feb 24, 2016 at 2:44 PM, Gaurav Garg <ggarg at redhat.com> wrote:

> hi abhishek,
>
> i need to look further why are you falling in this situation. file name
> and uuid in /var/lib/glusterd/peers  should be same. each file in
> /var/lib/glusterd/peers having information about its peer in the cluster.
>
> could you join #gluster channel on freenode. just ping me (irc name:
> ggarg) after joining the channel.
>
> Thanks,
> Gaurav
>
>
> ----- Original Message -----
> From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> To: "Gaurav Garg" <ggarg at redhat.com>
> Cc: gluster-users at gluster.org
> Sent: Wednesday, February 24, 2016 12:31:51 PM
> Subject: Re: [Gluster-users] Issue in Adding/Removing the gluster node
>
> Hi Gaurav,
>
> I have noticed one more thing in etc-glusterfs-glusterd.vol.log file with
> respect to UUID of Peer <10.32.1.144>
> It has two UUID
> Before removing
>
> UUID is - b88c74b9-457d-4864-9fe6-403f6934d7d1 and after inserting the node
> UUID is - 5ec06937-5f85-4a9d-b29e-4227bbb7b4fa
>
> Also have one file in glusterd/peers/ directory with the same name of first
> UUID.
>
> What does this file mean in peers directory? is this file providing some
> kind of linking between both of the UUID?
>
> Please find this file as an attachment.
>
> Regards,
> Abhishek
>
> On Wed, Feb 24, 2016 at 12:06 PM, Gaurav Garg <ggarg at redhat.com> wrote:
>
> > Hi abhishek,
> >
> > yes i looked into configuration file's that you have provided. there
> every
> > things seems to be fine.
> >
> > seems like some other problem. i will look into it today and will come
> > back to you.
> >
> > thanks,
> >
> > ~Gaurav
> >
> > ----- Original Message -----
> > From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > To: "Gaurav Garg" <ggarg at redhat.com>
> > Cc: gluster-users at gluster.org
> > Sent: Wednesday, February 24, 2016 12:02:47 PM
> > Subject: Re: [Gluster-users] Issue in Adding/Removing the gluster node
> >
> > Hi Gaurav,
> >
> > Have you get the time to see the logs files which you asked yesterday?
> >
> > Regards,
> > Abhishek
> >
> > On Tue, Feb 23, 2016 at 3:05 PM, ABHISHEK PALIWAL <
> abhishpaliwal at gmail.com
> > >
> > wrote:
> >
> > > Hi Gaurav,
> > >
> > > Please find the vol.tar file.
> > >
> > > Regards,
> > > Abhishek
> > >
> > > On Tue, Feb 23, 2016 at 2:37 PM, Gaurav Garg <ggarg at redhat.com> wrote:
> > >
> > >> Hi abhishek,
> > >>
> > >> >> But after analyzing the following logs from the 1st board seems
> that
> > >> the
> > >> process which will update the second brick in output of "# gluster
> > volume
> > >> status c_glusterfs" takes sometime to update this table and before the
> > >> updation of this table remove-brick is getting executed that is why it
> > is
> > >> getting failed.
> > >>
> > >> It should not take that much of time. If your peer probe is successful
> > >> and you are able to
> > >> see 2nd broad peer entry in #gluster peer status command then it have
> > >> updated all information
> > >> of volume internally.
> > >>
> > >> your gluster volume status showing 2nd board entry:
> > >>
> > >> Brick 10.32.0.48:/opt/lvmdir/c2/brick       49153     0          Y
> > >> 2537
> > >> Self-heal Daemon on localhost               N/A       N/A        Y
> > >> 5577
> > >> Self-heal Daemon on 10.32.1.144             N/A       N/A        Y
> > >> 3850
> > >>
> > >> but its not showing 2nd board brick entry.
> > >>
> > >>
> > >> Did you perform any manual operation with configuration file which
> > >> resides in /var/lib/glusterd/* ?
> > >>
> > >> could you attach/paste the file
> > >> /var/lib/glusterd/vols/c_glusterfs/trusted-*.tcp-fuse.vol file.
> > >>
> > >>
> > >> Thanks,
> > >>
> > >> Regards,
> > >> Gaurav
> > >>
> > >> ----- Original Message -----
> > >> From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> To: "Gaurav Garg" <ggarg at redhat.com>
> > >> Cc: gluster-users at gluster.org
> > >> Sent: Tuesday, February 23, 2016 1:33:30 PM
> > >> Subject: Re: [Gluster-users] Issue in Adding/Removing the gluster node
> > >>
> > >> Hi Gaurav,
> > >>
> > >> For the network connectivity I am doing peer probe to the 10.32.1.144
> > i.e.
> > >> 2nd board thats working fine means connectivity is there.
> > >>
> > >> #peer probe 10.32.1.144
> > >>
> > >> if the above command get success
> > >>
> > >> I executed the the remove-brick command which is getting failed.
> > >>
> > >> So,  now it seems the the peer probe will not give the correct
> > >> connectivity
> > >> status to execute the remove-brick command.
> > >>
> > >> But after analyzing the following logs from the 1st board seems that
> the
> > >> process which will update the second brick in output of "# gluster
> > volume
> > >> status c_glusterfs" takes sometime to update this table and before the
> > >> updation of this table remove-brick is getting executed that is why it
> > is
> > >> getting failed.
> > >>
> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > >>
> > >> *1st board:*
> > >> # gluster volume info
> > >> status
> > >> gluster volume status c_glusterfs
> > >> Volume Name: c_glusterfs
> > >> Type: Replicate
> > >> Volume ID: 32793e91-6f88-4f29-b3e4-0d53d02a4b99
> > >> Status: Started
> > >> Number of Bricks: 1 x 2 = 2
> > >> Transport-type: tcp
> > >> Bricks:
> > >> Brick1: 10.32.0.48:/opt/lvmdir/c2/brick
> > >> Brick2: 10.32.1.144:/opt/lvmdir/c2/brick
> > >> Options Reconfigured:
> > >> nfs.disable: on
> > >> network.ping-timeout: 4
> > >> performance.readdir-ahead: on
> > >> # gluster peer status
> > >> Number of Peers: 1
> > >>
> > >> Hostname: 10.32.1.144
> > >> Uuid: b88c74b9-457d-4864-9fe6-403f6934d7d1
> > >> State: Peer in Cluster (Connected)
> > >> # gluster volume status c_glusterfs
> > >> Status of volume: c_glusterfs
> > >> Gluster process                             TCP Port  RDMA Port
> Online
> > >> Pid
> > >>
> > >>
> >
> ------------------------------------------------------------------------------
> > >>
> > >> Brick 10.32.0.48:/opt/lvmdir/c2/brick       49153     0          Y
> > >> 2537
> > >> Self-heal Daemon on localhost               N/A       N/A        Y
> > >> 5577
> > >> Self-heal Daemon on 10.32.1.144             N/A       N/A        Y
> > >> 3850
> > >>
> > >> Task Status of Volume c_glusterfs
> > >>
> > >>
> >
> ------------------------------------------------------------------------------
> > >>
> > >> There are no active volume tasks
> > >>
> > >> +++++++++++++++++++++++++++++++++++++++++++++++
> > >>
> > >> I'll try this with some delay or wait to remove-brick until the #
> > gluster
> > >> volume status c_glusterfs command show second brick in the list.
> > >>
> > >> May we this approach will resolve the issue.
> > >>
> > >> Please comment, If you are agree with my observation
> > >>
> > >> Regards,
> > >> Abhishek
> > >>
> > >> On Tue, Feb 23, 2016 at 1:10 PM, ABHISHEK PALIWAL <
> > >> abhishpaliwal at gmail.com>
> > >> wrote:
> > >>
> > >> > Hi Gaurav,
> > >> >
> > >> > In my case we are removing the brick in the offline state with the
> > force
> > >> > option like in the following way:
> > >> >
> > >> >
> > >> >
> > >> > *gluster volume remove-brick %s replica 1 %s:%s force --mode=script*
> > >> > but still getting the failure or remove-brick
> > >> >
> > >> > it seems that brick is not present which we are trying to remove
> here
> > >> are
> > >> > the log snippet of both of the boards
> > >> >
> > >> >
> > >> > *1st board:*
> > >> > # gluster volume info
> > >> > status
> > >> > gluster volume status c_glusterfs
> > >> > Volume Name: c_glusterfs
> > >> > Type: Replicate
> > >> > Volume ID: 32793e91-6f88-4f29-b3e4-0d53d02a4b99
> > >> > Status: Started
> > >> > Number of Bricks: 1 x 2 = 2
> > >> > Transport-type: tcp
> > >> > Bricks:
> > >> > Brick1: 10.32.0.48:/opt/lvmdir/c2/brick
> > >> > Brick2: 10.32.1.144:/opt/lvmdir/c2/brick
> > >> > Options Reconfigured:
> > >> > nfs.disable: on
> > >> > network.ping-timeout: 4
> > >> > performance.readdir-ahead: on
> > >> > # gluster peer status
> > >> > Number of Peers: 1
> > >> >
> > >> > Hostname: 10.32.1.144
> > >> > Uuid: b88c74b9-457d-4864-9fe6-403f6934d7d1
> > >> > State: Peer in Cluster (Connected)
> > >> > # gluster volume status c_glusterfs
> > >> > Status of volume: c_glusterfs
> > >> > Gluster process                             TCP Port  RDMA Port
> > Online
> > >> > Pid
> > >> >
> > >>
> >
> ------------------------------------------------------------------------------
> > >> >
> > >> > Brick 10.32.0.48:/opt/lvmdir/c2/brick       49153     0          Y
> > >> > 2537
> > >> > Self-heal Daemon on localhost               N/A       N/A        Y
> > >> > 5577
> > >> > Self-heal Daemon on 10.32.1.144             N/A       N/A        Y
> > >> > 3850
> > >> >
> > >> > Task Status of Volume c_glusterfs
> > >> >
> > >>
> >
> ------------------------------------------------------------------------------
> > >> >
> > >> > There are no active volume tasks
> > >> >
> > >> > *2nd Board*:
> > >> >
> > >> > # gluster volume info
> > >> > status
> > >> > gluster volume status c_glusterfs
> > >> > gluster volume heal c_glusterfs info
> > >> >
> > >> > Volume Name: c_glusterfs
> > >> > Type: Replicate
> > >> > Volume ID: 32793e91-6f88-4f29-b3e4-0d53d02a4b99
> > >> > Status: Started
> > >> > Number of Bricks: 1 x 2 = 2
> > >> > Transport-type: tcp
> > >> > Bricks:
> > >> > Brick1: 10.32.0.48:/opt/lvmdir/c2/brick
> > >> > Brick2: 10.32.1.144:/opt/lvmdir/c2/brick
> > >> > Options Reconfigured:
> > >> > performance.readdir-ahead: on
> > >> > network.ping-timeout: 4
> > >> > nfs.disable: on
> > >> > # gluster peer status
> > >> > Number of Peers: 1
> > >> >
> > >> > Hostname: 10.32.0.48
> > >> > Uuid: e7c4494e-aa04-4909-81c9-27a462f6f9e7
> > >> > State: Peer in Cluster (Connected)
> > >> > # gluster volume status c_glusterfs
> > >> > Status of volume: c_glusterfs
> > >> > Gluster process                             TCP Port  RDMA Port
> > Online
> > >> > Pid
> > >> >
> > >>
> >
> ------------------------------------------------------------------------------
> > >> >
> > >> > Brick 10.32.0.48:/opt/lvmdir/c2/brick       49153     0          Y
> > >> > 2537
> > >> > Self-heal Daemon on localhost               N/A       N/A        Y
> > >> > 3850
> > >> > Self-heal Daemon on 10.32.0.48              N/A       N/A        Y
> > >> > 5577
> > >> >
> > >> > Task Status of Volume c_glusterfs
> > >> >
> > >>
> >
> ------------------------------------------------------------------------------
> > >> >
> > >> > There are no active volume tasks
> > >> >
> > >> > Do you know why these logs are not showing the Brick info at the
> time
> > of
> > >> > gluster volume status.
> > >> > Because we are not able to collect the logs of cmd_history.log file
> > from
> > >> > the 2nd board.
> > >> >
> > >> > Regards,
> > >> > Abhishek
> > >> >
> > >> >
> > >> > On Tue, Feb 23, 2016 at 12:02 PM, Gaurav Garg <ggarg at redhat.com>
> > wrote:
> > >> >
> > >> >> Hi abhishek,
> > >> >>
> > >> >> >> Can we perform remove-brick operation on the offline brick? what
> > is
> > >> the
> > >> >> meaning of offline and online brick?
> > >> >>
> > >> >> No, you can't perform remove-brick operation on the offline brick.
> > >> brick
> > >> >> is offline means brick process is not running. you can see it by
> > >> executing
> > >> >> #gluster volume status. If brick is offline then respective brick
> > will
> > >> show
> > >> >> "N" entry in Online column of #gluster volume status command.
> > >> Alternatively
> > >> >> you can also check whether glusterfsd process for that brick is
> > >> running or
> > >> >> not by executing #ps aux | grep glusterfsd, this command will list
> > out
> > >> all
> > >> >> the brick process you can filter out from them, which one is
> online,
> > >> which
> > >> >> one is not.
> > >> >>
> > >> >> But if you want to perform remove-brick operation on the offline
> > brick
> > >> >> then you need to execute it with force option. #gluster volume
> > >> remove-brick
> > >> >> <volname> hostname:/brick_name force. This might lead to data loss.
> > >> >>
> > >> >>
> > >> >>
> > >> >> >> Also, Is there any logic in gluster through which we can check
> the
> > >> >> connectivity of node established or not before performing the any
> > >> >> operation
> > >> >> on brick?
> > >> >>
> > >> >> Yes, you can check it by executing #gluster peer status command.
> > >> >>
> > >> >>
> > >> >> Thanks,
> > >> >>
> > >> >> ~Gaurav
> > >> >>
> > >> >>
> > >> >> ----- Original Message -----
> > >> >> From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> >> To: "Gaurav Garg" <ggarg at redhat.com>
> > >> >> Cc: gluster-users at gluster.org
> > >> >> Sent: Tuesday, February 23, 2016 11:50:43 AM
> > >> >> Subject: Re: [Gluster-users] Issue in Adding/Removing the gluster
> > node
> > >> >>
> > >> >> Hi Gaurav,
> > >> >>
> > >> >> one general question related to gluster bricks.
> > >> >>
> > >> >> Can we perform remove-brick operation on the offline brick? what is
> > the
> > >> >> meaning of offline and online brick?
> > >> >> Also, Is there any logic in gluster through which we can check the
> > >> >> connectivity of node established or not before performing the any
> > >> >> operation
> > >> >> on brick?
> > >> >>
> > >> >> Regards,
> > >> >> Abhishek
> > >> >>
> > >> >> On Mon, Feb 22, 2016 at 2:42 PM, Gaurav Garg <ggarg at redhat.com>
> > wrote:
> > >> >>
> > >> >> > Hi abhishek,
> > >> >> >
> > >> >> > I went through your logs of node 1 and by looking glusterd logs
> its
> > >> >> > clearly indicate that your 2nd node (10.32.1.144) have
> disconnected
> > >> from
> > >> >> > the cluster, because of that remove-brick operation failed. I
> think
> > >> you
> > >> >> > need to check your network interface.
> > >> >> >
> > >> >> > But surprising things is that i did not see duplicate peer entry
> in
> > >> >> > #gluster peer status command output.
> > >> >> >
> > >> >> > May be i will get some more information from your (10.32.1.144)
> 2nd
> > >> node
> > >> >> > logs. Could you also attach your 2nd node logs.
> > >> >> >
> > >> >> > after restarting glusterd, are you seeing duplicate peer entry in
> > >> >> #gluster
> > >> >> > peer status command output ?
> > >> >> >
> > >> >> > will wait for 2nd node logs for further analyzing duplicate peer
> > >> entry
> > >> >> > problem.
> > >> >> >
> > >> >> > Thanks,
> > >> >> >
> > >> >> > ~Gaurav
> > >> >> >
> > >> >> > ----- Original Message -----
> > >> >> > From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> >> > To: "Gaurav Garg" <ggarg at redhat.com>
> > >> >> > Cc: gluster-users at gluster.org
> > >> >> > Sent: Monday, February 22, 2016 12:48:55 PM
> > >> >> > Subject: Re: [Gluster-users] Issue in Adding/Removing the gluster
> > >> node
> > >> >> >
> > >> >> > Hi Gaurav,
> > >> >> >
> > >> >> > Here, You can find the attached logs for the boards in case of
> > >> >> remove-brick
> > >> >> > failure.
> > >> >> > In these logs we do not have the cmd_history and
> > >> >> > etc-glusterfs-glusterd.vol.log for the second board.
> > >> >> >
> > >> >> > May be for that we need to some more time.
> > >> >> >
> > >> >> >
> > >> >> > Regards,
> > >> >> > Abhishek
> > >> >> >
> > >> >> > On Mon, Feb 22, 2016 at 10:18 AM, Gaurav Garg <ggarg at redhat.com>
> > >> wrote:
> > >> >> >
> > >> >> > > Hi Abhishek,
> > >> >> > >
> > >> >> > > >>  I'll provide the required log to you.
> > >> >> > >
> > >> >> > > sure
> > >> >> > >
> > >> >> > > on both node. do "pkill glusterd" and then start glusterd
> > services.
> > >> >> > >
> > >> >> > > Thanks,
> > >> >> > >
> > >> >> > > ~Gaurav
> > >> >> > >
> > >> >> > > ----- Original Message -----
> > >> >> > > From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> >> > > To: "Gaurav Garg" <ggarg at redhat.com>
> > >> >> > > Cc: gluster-users at gluster.org
> > >> >> > > Sent: Monday, February 22, 2016 10:11:48 AM
> > >> >> > > Subject: Re: [Gluster-users] Issue in Adding/Removing the
> gluster
> > >> node
> > >> >> > >
> > >> >> > > Hi Gaurav,
> > >> >> > >
> > >> >> > > Thanks for your prompt reply.
> > >> >> > >
> > >> >> > > I'll provide the required log to you.
> > >> >> > >
> > >> >> > > As a workaround you suggested that restart the glusterd
> service.
> > >> Could
> > >> >> > you
> > >> >> > > please tell me the point where I can do this?
> > >> >> > >
> > >> >> > > Regards,
> > >> >> > > Abhishek
> > >> >> > >
> > >> >> > > On Fri, Feb 19, 2016 at 6:11 PM, Gaurav Garg <ggarg at redhat.com
> >
> > >> >> wrote:
> > >> >> > >
> > >> >> > > > Hi Abhishek,
> > >> >> > > >
> > >> >> > > > Peer status output looks interesting where it have stale
> entry,
> > >> >> > > > technically it should not happen. Here few thing need to ask
> > >> >> > > >
> > >> >> > > > Did you perform any manual operation with GlusterFS
> > configuration
> > >> >> file
> > >> >> > > > which resides in /var/lib/glusterd/* folder.
> > >> >> > > >
> > >> >> > > > Can you provide output of "ls /var/lib/glusterd/peers"  from
> > >> both of
> > >> >> > your
> > >> >> > > > nodes.
> > >> >> > > >
> > >> >> > > > Could you provide output of #gluster peer status command when
> > 2nd
> > >> >> node
> > >> >> > is
> > >> >> > > > down
> > >> >> > > >
> > >> >> > > > Can you provide output of #gluster volume info command
> > >> >> > > >
> > >> >> > > > Can you provide full logs details of cmd_history.log and
> > >> >> > > > etc-glusterfs-glusterd.vol.log from both the nodes.
> > >> >> > > >
> > >> >> > > >
> > >> >> > > > You can restart your glusterd as of now as a workaround but
> we
> > >> need
> > >> >> to
> > >> >> > > > analysis this issue further.
> > >> >> > > >
> > >> >> > > > Thanks,
> > >> >> > > > Gaurav
> > >> >> > > >
> > >> >> > > > ----- Original Message -----
> > >> >> > > > From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> >> > > > To: "Gaurav Garg" <ggarg at redhat.com>
> > >> >> > > > Cc: gluster-users at gluster.org
> > >> >> > > > Sent: Friday, February 19, 2016 5:27:21 PM
> > >> >> > > > Subject: Re: [Gluster-users] Issue in Adding/Removing the
> > gluster
> > >> >> node
> > >> >> > > >
> > >> >> > > > Hi Gaurav,
> > >> >> > > >
> > >> >> > > > After the failure of add-brick following is outcome "gluster
> > peer
> > >> >> > status"
> > >> >> > > > command
> > >> >> > > >
> > >> >> > > > Number of Peers: 2
> > >> >> > > >
> > >> >> > > > Hostname: 10.32.1.144
> > >> >> > > > Uuid: bbe2a458-ad3d-406d-b233-b6027c12174e
> > >> >> > > > State: Peer in Cluster (Connected)
> > >> >> > > >
> > >> >> > > > Hostname: 10.32.1.144
> > >> >> > > > Uuid: bbe2a458-ad3d-406d-b233-b6027c12174e
> > >> >> > > > State: Peer in Cluster (Connected)
> > >> >> > > >
> > >> >> > > > Regards,
> > >> >> > > > Abhishek
> > >> >> > > >
> > >> >> > > > On Fri, Feb 19, 2016 at 5:21 PM, ABHISHEK PALIWAL <
> > >> >> > > abhishpaliwal at gmail.com
> > >> >> > > > >
> > >> >> > > > wrote:
> > >> >> > > >
> > >> >> > > > > Hi Gaurav,
> > >> >> > > > >
> > >> >> > > > > Both are the board connect through the backplane using
> > >> ethernet.
> > >> >> > > > >
> > >> >> > > > > Even this inconsistency also occurs when I am trying to
> > >> bringing
> > >> >> back
> > >> >> > > the
> > >> >> > > > > node in slot. Means some time add-brick executes without
> > >> failure
> > >> >> but
> > >> >> > > some
> > >> >> > > > > time following error occurs.
> > >> >> > > > >
> > >> >> > > > > volume add-brick c_glusterfs replica 2 10.32.1.144:
> > >> >> > > /opt/lvmdir/c2/brick
> > >> >> > > > > force : FAILED : Another transaction is in progress for
> > >> >> c_glusterfs.
> > >> >> > > > Please
> > >> >> > > > > try again after sometime.
> > >> >> > > > >
> > >> >> > > > >
> > >> >> > > > > You can also see the attached logs for add-brick failure
> > >> scenario.
> > >> >> > > > >
> > >> >> > > > > Please let me know if you need more logs.
> > >> >> > > > >
> > >> >> > > > > Regards,
> > >> >> > > > > Abhishek
> > >> >> > > > >
> > >> >> > > > >
> > >> >> > > > > On Fri, Feb 19, 2016 at 5:03 PM, Gaurav Garg <
> > ggarg at redhat.com
> > >> >
> > >> >> > wrote:
> > >> >> > > > >
> > >> >> > > > >> Hi Abhishek,
> > >> >> > > > >>
> > >> >> > > > >> How are you connecting two board, and how are you removing
> > it
> > >> >> > manually
> > >> >> > > > >> that need to know because if you are removing your 2nd
> board
> > >> from
> > >> >> > the
> > >> >> > > > >> cluster (abrupt shutdown) then you can't perform remove
> > brick
> > >> >> > > operation
> > >> >> > > > in
> > >> >> > > > >> 2nd node from first node and its happening successfully in
> > >> your
> > >> >> > case.
> > >> >> > > > could
> > >> >> > > > >> you ensure your network connection once again while
> removing
> > >> and
> > >> >> > > > bringing
> > >> >> > > > >> back your node again.
> > >> >> > > > >>
> > >> >> > > > >> Thanks,
> > >> >> > > > >> Gaurav
> > >> >> > > > >>
> > >> >> > > > >> ------------------------------
> > >> >> > > > >> *From: *"ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> >> > > > >> *To: *"Gaurav Garg" <ggarg at redhat.com>
> > >> >> > > > >> *Cc: *gluster-users at gluster.org
> > >> >> > > > >> *Sent: *Friday, February 19, 2016 3:36:21 PM
> > >> >> > > > >>
> > >> >> > > > >> *Subject: *Re: [Gluster-users] Issue in Adding/Removing
> the
> > >> >> gluster
> > >> >> > > node
> > >> >> > > > >>
> > >> >> > > > >> Hi Gaurav,
> > >> >> > > > >>
> > >> >> > > > >> Thanks for reply
> > >> >> > > > >>
> > >> >> > > > >> 1. Here, I removed the board manually here but this time
> it
> > >> works
> > >> >> > fine
> > >> >> > > > >>
> > >> >> > > > >> [2016-02-18 10:03:40.601472]  : volume remove-brick
> > >> c_glusterfs
> > >> >> > > replica
> > >> >> > > > 1
> > >> >> > > > >> 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
> > >> >> > > > >> [2016-02-18 10:03:40.885973]  : peer detach 10.32.1.144 :
> > >> SUCCESS
> > >> >> > > > >>
> > >> >> > > > >> Yes this time board is reachable but how? don't know
> because
> > >> >> board
> > >> >> > is
> > >> >> > > > >> detached.
> > >> >> > > > >>
> > >> >> > > > >> 2. Here, I attached the board this time its works fine in
> > >> >> add-bricks
> > >> >> > > > >>
> > >> >> > > > >> 2016-02-18 10:03:42.065038]  : peer probe 10.32.1.144 :
> > >> SUCCESS
> > >> >> > > > >> [2016-02-18 10:03:44.563546]  : volume add-brick
> c_glusterfs
> > >> >> > replica 2
> > >> >> > > > >> 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
> > >> >> > > > >>
> > >> >> > > > >> 3.Here, again I removed the board this time failed occur
> > >> >> > > > >>
> > >> >> > > > >> [2016-02-18 10:37:02.816089]  : volume remove-brick
> > >> c_glusterfs
> > >> >> > > replica
> > >> >> > > > 1
> > >> >> > > > >> 10.32.1.144:/opt/lvmdir/c2/brick force : FAILED :
> Incorrect
> > >> >> brick
> > >> >> > > > >> 10.32.1.144:/opt
> > >> >> > > > >> /lvmdir/c2/brick for volume c_glusterfs
> > >> >> > > > >>
> > >> >> > > > >> but here board is not reachable.
> > >> >> > > > >>
> > >> >> > > > >> why this inconsistency is there while doing the same step
> > >> >> multiple
> > >> >> > > time.
> > >> >> > > > >>
> > >> >> > > > >> Hope you are getting my point.
> > >> >> > > > >>
> > >> >> > > > >> Regards,
> > >> >> > > > >> Abhishek
> > >> >> > > > >>
> > >> >> > > > >> On Fri, Feb 19, 2016 at 3:25 PM, Gaurav Garg <
> > >> ggarg at redhat.com>
> > >> >> > > wrote:
> > >> >> > > > >>
> > >> >> > > > >>> Abhishek,
> > >> >> > > > >>>
> > >> >> > > > >>> when sometime its working fine means 2nd board network
> > >> >> connection
> > >> >> > is
> > >> >> > > > >>> reachable to first node. you can conform this by
> executing
> > >> same
> > >> >> > > > #gluster
> > >> >> > > > >>> peer status command.
> > >> >> > > > >>>
> > >> >> > > > >>> Thanks,
> > >> >> > > > >>> Gaurav
> > >> >> > > > >>>
> > >> >> > > > >>> ----- Original Message -----
> > >> >> > > > >>> From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> >> > > > >>> To: "Gaurav Garg" <ggarg at redhat.com>
> > >> >> > > > >>> Cc: gluster-users at gluster.org
> > >> >> > > > >>> Sent: Friday, February 19, 2016 3:12:22 PM
> > >> >> > > > >>> Subject: Re: [Gluster-users] Issue in Adding/Removing the
> > >> >> gluster
> > >> >> > > node
> > >> >> > > > >>>
> > >> >> > > > >>> Hi Gaurav,
> > >> >> > > > >>>
> > >> >> > > > >>> Yes, you are right actually I am force fully detaching
> the
> > >> node
> > >> >> > from
> > >> >> > > > the
> > >> >> > > > >>> slave and when we removed the board it disconnected from
> > the
> > >> >> > another
> > >> >> > > > >>> board.
> > >> >> > > > >>>
> > >> >> > > > >>> but my question is I am doing this process multiple time
> > some
> > >> >> time
> > >> >> > it
> > >> >> > > > >>> works
> > >> >> > > > >>> fine but some time it gave these errors.
> > >> >> > > > >>>
> > >> >> > > > >>>
> > >> >> > > > >>> you can see the following logs from cmd_history.log file
> > >> >> > > > >>>
> > >> >> > > > >>> [2016-02-18 10:03:34.497996]  : volume set c_glusterfs
> > >> >> nfs.disable
> > >> >> > > on :
> > >> >> > > > >>> SUCCESS
> > >> >> > > > >>> [2016-02-18 10:03:34.915036]  : volume start c_glusterfs
> > >> force :
> > >> >> > > > SUCCESS
> > >> >> > > > >>> [2016-02-18 10:03:40.250326]  : volume status : SUCCESS
> > >> >> > > > >>> [2016-02-18 10:03:40.273275]  : volume status : SUCCESS
> > >> >> > > > >>> [2016-02-18 10:03:40.601472]  : volume remove-brick
> > >> c_glusterfs
> > >> >> > > > replica 1
> > >> >> > > > >>> 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
> > >> >> > > > >>> [2016-02-18 10:03:40.885973]  : peer detach 10.32.1.144 :
> > >> >> SUCCESS
> > >> >> > > > >>> [2016-02-18 10:03:42.065038]  : peer probe 10.32.1.144 :
> > >> SUCCESS
> > >> >> > > > >>> [2016-02-18 10:03:44.563546]  : volume add-brick
> > c_glusterfs
> > >> >> > replica
> > >> >> > > 2
> > >> >> > > > >>> 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
> > >> >> > > > >>> [2016-02-18 10:30:53.297415]  : volume status : SUCCESS
> > >> >> > > > >>> [2016-02-18 10:30:53.313096]  : volume status : SUCCESS
> > >> >> > > > >>> [2016-02-18 10:37:02.748714]  : volume status : SUCCESS
> > >> >> > > > >>> [2016-02-18 10:37:02.762091]  : volume status : SUCCESS
> > >> >> > > > >>> [2016-02-18 10:37:02.816089]  : volume remove-brick
> > >> c_glusterfs
> > >> >> > > > replica 1
> > >> >> > > > >>> 10.32.1.144:/opt/lvmdir/c2/brick force : FAILED :
> > Incorrect
> > >> >> brick
> > >> >> > > > >>> 10.32.1.144:/opt/lvmdir/c2/brick for volume c_glusterfs
> > >> >> > > > >>>
> > >> >> > > > >>>
> > >> >> > > > >>> On Fri, Feb 19, 2016 at 3:05 PM, Gaurav Garg <
> > >> ggarg at redhat.com>
> > >> >> > > wrote:
> > >> >> > > > >>>
> > >> >> > > > >>> > Hi Abhishek,
> > >> >> > > > >>> >
> > >> >> > > > >>> > Seems your peer 10.32.1.144 have disconnected while
> doing
> > >> >> remove
> > >> >> > > > brick.
> > >> >> > > > >>> > see the below logs in glusterd:
> > >> >> > > > >>> >
> > >> >> > > > >>> > [2016-02-18 10:37:02.816009] E [MSGID: 106256]
> > >> >> > > > >>> >
> > [glusterd-brick-ops.c:1047:__glusterd_handle_remove_brick]
> > >> >> > > > >>> 0-management:
> > >> >> > > > >>> > Incorrect brick 10.32.1.144:/opt/lvmdir/c2/brick for
> > >> volume
> > >> >> > > > >>> c_glusterfs
> > >> >> > > > >>> > [Invalid argument]
> > >> >> > > > >>> > [2016-02-18 10:37:02.816061] E [MSGID: 106265]
> > >> >> > > > >>> >
> > [glusterd-brick-ops.c:1088:__glusterd_handle_remove_brick]
> > >> >> > > > >>> 0-management:
> > >> >> > > > >>> > Incorrect brick 10.32.1.144:/opt/lvmdir/c2/brick for
> > >> volume
> > >> >> > > > >>> c_glusterfs
> > >> >> > > > >>> > The message "I [MSGID: 106004]
> > >> >> > > > >>> > [glusterd-handler.c:5065:__glusterd_peer_rpc_notify]
> > >> >> > 0-management:
> > >> >> > > > Peer
> > >> >> > > > >>> > <10.32.1.144> (<6adf57dc-c619-4e56-ae40-90e6aef75fe9>),
> > in
> > >> >> state
> > >> >> > > > <Peer
> > >> >> > > > >>> in
> > >> >> > > > >>> > Cluster>, has disconnected from glusterd." repeated 25
> > >> times
> > >> >> > > between
> > >> >> > > > >>> > [2016-02-18 10:35:43.131945] and [2016-02-18
> > >> 10:36:58.160458]
> > >> >> > > > >>> >
> > >> >> > > > >>> >
> > >> >> > > > >>> >
> > >> >> > > > >>> > If you are facing the same issue now, could you paste
> > your
> > >> #
> > >> >> > > gluster
> > >> >> > > > >>> peer
> > >> >> > > > >>> > status     command output here.
> > >> >> > > > >>> >
> > >> >> > > > >>> > Thanks,
> > >> >> > > > >>> > ~Gaurav
> > >> >> > > > >>> >
> > >> >> > > > >>> > ----- Original Message -----
> > >> >> > > > >>> > From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> >> > > > >>> > To: gluster-users at gluster.org
> > >> >> > > > >>> > Sent: Friday, February 19, 2016 2:46:35 PM
> > >> >> > > > >>> > Subject: [Gluster-users] Issue in Adding/Removing the
> > >> gluster
> > >> >> > node
> > >> >> > > > >>> >
> > >> >> > > > >>> > Hi,
> > >> >> > > > >>> >
> > >> >> > > > >>> >
> > >> >> > > > >>> > I am working on two board setup connecting to each
> other.
> > >> >> Gluster
> > >> >> > > > >>> version
> > >> >> > > > >>> > 3.7.6 is running and added two bricks in replica 2 mode
> > but
> > >> >> when
> > >> >> > I
> > >> >> > > > >>> manually
> > >> >> > > > >>> > removed (detach) the one board from the setup I am
> > getting
> > >> the
> > >> >> > > > >>> following
> > >> >> > > > >>> > error.
> > >> >> > > > >>> >
> > >> >> > > > >>> > volume remove-brick c_glusterfs replica 1 10.32.1.144:
> > >> >> > > > >>> /opt/lvmdir/c2/brick
> > >> >> > > > >>> > force : FAILED : Incorrect brick 10.32.1.144:
> > >> >> > /opt/lvmdir/c2/brick
> > >> >> > > > for
> > >> >> > > > >>> > volume c_glusterfs
> > >> >> > > > >>> >
> > >> >> > > > >>> > Please find the logs file as an attachment.
> > >> >> > > > >>> >
> > >> >> > > > >>> >
> > >> >> > > > >>> > Regards,
> > >> >> > > > >>> > Abhishek
> > >> >> > > > >>> >
> > >> >> > > > >>> >
> > >> >> > > > >>> > _______________________________________________
> > >> >> > > > >>> > Gluster-users mailing list
> > >> >> > > > >>> > Gluster-users at gluster.org
> > >> >> > > > >>> > http://www.gluster.org/mailman/listinfo/gluster-users
> > >> >> > > > >>> >
> > >> >> > > > >>>
> > >> >> > > > >>>
> > >> >> > > > >>>
> > >> >> > > > >>> --
> > >> >> > > > >>>
> > >> >> > > > >>>
> > >> >> > > > >>>
> > >> >> > > > >>>
> > >> >> > > > >>> Regards
> > >> >> > > > >>> Abhishek Paliwal
> > >> >> > > > >>>
> > >> >> > > > >>
> > >> >> > > > >>
> > >> >> > > > >>
> > >> >> > > > >> --
> > >> >> > > > >>
> > >> >> > > > >>
> > >> >> > > > >>
> > >> >> > > > >>
> > >> >> > > > >> Regards
> > >> >> > > > >> Abhishek Paliwal
> > >> >> > > > >>
> > >> >> > > > >>
> > >> >> > > > >
> > >> >> > > > >
> > >> >> > > > >
> > >> >> > > > >
> > >> >> > > >
> > >> >> > > >
> > >> >> > > > --
> > >> >> > > >
> > >> >> > > >
> > >> >> > > >
> > >> >> > > >
> > >> >> > > > Regards
> > >> >> > > > Abhishek Paliwal
> > >> >> > > >
> > >> >> > >
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> > --
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> > Regards
> > >> >> > Abhishek Paliwal
> > >> >> >
> > >> >>
> > >> >>
> > >> >>
> > >> >> --
> > >> >>
> > >> >>
> > >> >>
> > >> >>
> > >> >> Regards
> > >> >> Abhishek Paliwal
> > >> >>
> > >> >
> > >> >
> > >> >
> > >> > --
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > Regards
> > >> > Abhishek Paliwal
> > >> >
> > >>
> > >>
> > >>
> > >> --
> > >>
> > >>
> > >>
> > >>
> > >> Regards
> > >> Abhishek Paliwal
> > >>
> > >
> > >
> > >
> > > --
> > >
> > >
> > >
> > >
> > > Regards
> > > Abhishek Paliwal
> > >
> >
> >
> >
> > --
> >
> >
> >
> >
> > Regards
> > Abhishek Paliwal
> >
>
>
>
> --
>
>
>
>
> Regards
> Abhishek Paliwal
>



-- 




Regards
Abhishek Paliwal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160225/b45521dd/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logs.zip
Type: application/zip
Size: 4247217 bytes
Desc: not available
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160225/b45521dd/attachment-0001.zip>


More information about the Gluster-users mailing list