[Gluster-users] Questions on ganesha HA and shared storage size

Alessandro De Salvo Alessandro.DeSalvo at roma1.infn.it
Wed Jun 10 19:07:22 UTC 2015


Hi,
by looking at the connections I also see a strange problem:

# netstat -ltaupn | grep 2049
tcp6       4      0 :::2049                 :::*
LISTEN      32080/ganesha.nfsd  
tcp6       1      0 x.x.x.2:2049      x.x.x.2:33285     CLOSE_WAIT
-                   
tcp6       1      0 127.0.0.1:2049          127.0.0.1:39555
CLOSE_WAIT  -                   
udp6       0      0 :::2049                 :::*
32080/ganesha.nfsd  


Why tcp6 is used with an IPv4 address?
In another machine where ganesha 2.1.0 is running I see tcp is used, not
tcp6.
Could it be that the RPC are always trying to use IPv6? That would be
wrong.
Thanks,

	Alessandro

On Wed, 2015-06-10 at 15:28 +0530, Soumya Koduri wrote:
> 
> On 06/10/2015 05:49 AM, Alessandro De Salvo wrote:
> > Hi,
> > I have enabled the full debug already, but I see nothing special. Before exporting any volume the log shows no error, even when I do a showmount (the log is attached, ganesha.log.gz). If I do the same after exporting a volume nfs-ganesha does not even start, complaining for not being able to bind the IPv6 ruota socket, but in fact there is nothing listening on IPv6, so it should not happen:
> >
> > tcp6       0      0 :::111                  :::*                    LISTEN      7433/rpcbind
> > tcp6       0      0 :::2224                 :::*                    LISTEN      9054/ruby
> > tcp6       0      0 :::22                   :::*                    LISTEN      1248/sshd
> > udp6       0      0 :::111                  :::*                                7433/rpcbind
> > udp6       0      0 fe80::8c2:27ff:fef2:123 :::*                                31238/ntpd
> > udp6       0      0 fe80::230:48ff:fed2:123 :::*                                31238/ntpd
> > udp6       0      0 fe80::230:48ff:fed2:123 :::*                                31238/ntpd
> > udp6       0      0 fe80::230:48ff:fed2:123 :::*                                31238/ntpd
> > udp6       0      0 ::1:123                 :::*                                31238/ntpd
> > udp6       0      0 fe80::5484:7aff:fef:123 :::*                                31238/ntpd
> > udp6       0      0 :::123                  :::*                                31238/ntpd
> > udp6       0      0 :::824                  :::*                                7433/rpcbind
> >
> > The error, as shown in the attached ganesha-after-export.log.gz logfile, is the following:
> >
> >
> > 10/06/2015 02:07:47 : epoch 55777fb5 : node2 : ganesha.nfsd-26195[main] Bind_sockets_V6 :DISP :WARN :Cannot bind RQUOTA tcp6 socket, error 98 (Address already in use)
> > 10/06/2015 02:07:47 : epoch 55777fb5 : node2 : ganesha.nfsd-26195[main] Bind_sockets :DISP :FATAL :Error binding to V6 interface. Cannot continue.
> > 10/06/2015 02:07:48 : epoch 55777fb5 : node2 : ganesha.nfsd-26195[main] glusterfs_unload :FSAL :DEBUG :FSAL Gluster unloaded
> >
> 
> We have seen such issues with RPCBIND few times. NFS-Ganesha setup first 
> disables Gluster-NFS and then brings up NFS-Ganesha service. Sometimes, 
> there could be delay or issue with Gluster-NFS un-registering those 
> services and when NFS-Ganesha tries to register to the same port, it 
> throws this error. Please try registering Rquota to any random port 
> using below config option in "/etc/ganesha/ganesha.conf"
> 
> NFS_Core_Param {
>          #Use a non-privileged port for RQuota
>          Rquota_Port = 4501;
> }
> 
> and cleanup '/var/cache/rpcbind/' directory before the setup.
> 
> Thanks,
> Soumya
> 
> >
> > Thanks,
> >
> > 	Alessandro
> >
> >
> >
> >
> >> Il giorno 09/giu/2015, alle ore 18:37, Soumya Koduri <skoduri at redhat.com> ha scritto:
> >>
> >>
> >>
> >> On 06/09/2015 09:47 PM, Alessandro De Salvo wrote:
> >>> Another update: the fact that I was unable to use vol set ganesha.enable
> >>> was due to another bug in the ganesha scripts. In short, they are all
> >>> using the following line to get the location of the conf file:
> >>>
> >>> CONF=$(cat /etc/sysconfig/ganesha | grep "CONFFILE" | cut -f 2 -d "=")
> >>>
> >>> First of all by default in /etc/sysconfig/ganesha there is no line
> >>> CONFFILE, second there is a bug in that directive, as it works if I add
> >>> in /etc/sysconfig/ganesha
> >>>
> >>> CONFFILE=/etc/ganesha/ganesha.conf
> >>>
> >>> but it fails if the same is quoted
> >>>
> >>> CONFFILE="/etc/ganesha/ganesha.conf"
> >>>
> >>> It would be much better to use the following, which has a default as
> >>> well:
> >>>
> >>> eval $(grep -F CONFFILE= /etc/sysconfig/ganesha)
> >>> CONF=${CONFFILE:/etc/ganesha/ganesha.conf}
> >>>
> >>> I'll update the bug report.
> >>> Having said this... the last issue to tackle is the real problem with
> >>> the ganesha.nfsd :-(
> >>
> >> Thanks. Could you try changing log level to NIV_FULL_DEBUG in '/etc/sysconfig/ganesha' and check if anything gets logged in '/var/log/ganesha.log' or '/ganesha.log'.
> >>
> >> Thanks,
> >> Soumya
> >>
> >>> Cheers,
> >>>
> >>> 	Alessandro
> >>>
> >>>
> >>> On Tue, 2015-06-09 at 14:25 +0200, Alessandro De Salvo wrote:
> >>>> OK, I can confirm that the ganesha.nsfd process is actually not
> >>>> answering to the calls. Here it is what I see:
> >>>>
> >>>> # rpcinfo -p
> >>>>     program vers proto   port  service
> >>>>      100000    4   tcp    111  portmapper
> >>>>      100000    3   tcp    111  portmapper
> >>>>      100000    2   tcp    111  portmapper
> >>>>      100000    4   udp    111  portmapper
> >>>>      100000    3   udp    111  portmapper
> >>>>      100000    2   udp    111  portmapper
> >>>>      100024    1   udp  41594  status
> >>>>      100024    1   tcp  53631  status
> >>>>      100003    3   udp   2049  nfs
> >>>>      100003    3   tcp   2049  nfs
> >>>>      100003    4   udp   2049  nfs
> >>>>      100003    4   tcp   2049  nfs
> >>>>      100005    1   udp  58127  mountd
> >>>>      100005    1   tcp  56301  mountd
> >>>>      100005    3   udp  58127  mountd
> >>>>      100005    3   tcp  56301  mountd
> >>>>      100021    4   udp  46203  nlockmgr
> >>>>      100021    4   tcp  41798  nlockmgr
> >>>>      100011    1   udp    875  rquotad
> >>>>      100011    1   tcp    875  rquotad
> >>>>      100011    2   udp    875  rquotad
> >>>>      100011    2   tcp    875  rquotad
> >>>>
> >>>> # netstat -lpn | grep ganesha
> >>>> tcp6      14      0 :::2049                 :::*
> >>>> LISTEN      11937/ganesha.nfsd
> >>>> tcp6       0      0 :::41798                :::*
> >>>> LISTEN      11937/ganesha.nfsd
> >>>> tcp6       0      0 :::875                  :::*
> >>>> LISTEN      11937/ganesha.nfsd
> >>>> tcp6      10      0 :::56301                :::*
> >>>> LISTEN      11937/ganesha.nfsd
> >>>> tcp6       0      0 :::564                  :::*
> >>>> LISTEN      11937/ganesha.nfsd
> >>>> udp6       0      0 :::2049                 :::*
> >>>> 11937/ganesha.nfsd
> >>>> udp6       0      0 :::46203                :::*
> >>>> 11937/ganesha.nfsd
> >>>> udp6       0      0 :::58127                :::*
> >>>> 11937/ganesha.nfsd
> >>>> udp6       0      0 :::875                  :::*
> >>>> 11937/ganesha.nfsd
> >>>>
> >>>> I'm attaching the strace of a showmount from a node to the other.
> >>>> This machinery was working with nfs-ganesha 2.1.0, so it must be
> >>>> something introduced with 2.2.0.
> >>>> Cheers,
> >>>>
> >>>> 	Alessandro
> >>>>
> >>>>
> >>>>
> >>>> On Tue, 2015-06-09 at 15:16 +0530, Soumya Koduri wrote:
> >>>>>
> >>>>> On 06/09/2015 02:48 PM, Alessandro De Salvo wrote:
> >>>>>> Hi,
> >>>>>> OK, the problem with the VIPs not starting is due to the ganesha_mon
> >>>>>> heartbeat script looking for a pid file called
> >>>>>> /var/run/ganesha.nfsd.pid, while by default ganesha.nfsd v.2.2.0 is
> >>>>>> creating /var/run/ganesha.pid, this needs to be corrected. The file is
> >>>>>> in glusterfs-ganesha-3.7.1-1.el7.x86_64, in my case.
> >>>>>> For the moment I have created a symlink in this way and it works:
> >>>>>>
> >>>>>> ln -s /var/run/ganesha.pid /var/run/ganesha.nfsd.pid
> >>>>>>
> >>>>> Thanks. Please update this as well in the bug.
> >>>>>
> >>>>>> So far so good, the VIPs are up and pingable, but still there is the
> >>>>>> problem of the hanging showmount (i.e. hanging RPC).
> >>>>>> Still, I see a lot of errors like this in /var/log/messages:
> >>>>>>
> >>>>>> Jun  9 11:15:20 atlas-node1 lrmd[31221]:   notice: operation_finished:
> >>>>>> nfs-mon_monitor_10000:29292:stderr [ Error: Resource does not exist. ]
> >>>>>>
> >>>>>> While ganesha.log shows the server is not in grace:
> >>>>>>
> >>>>>> 09/06/2015 11:16:20 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29964[main] main :MAIN :EVENT :ganesha.nfsd Starting:
> >>>>>> Ganesha Version /builddir/build/BUILD/nfs-ganesha-2.2.0/src, built at
> >>>>>> May 18 2015 14:17:18 on buildhw-09.phx2.fedoraproject.org
> >>>>>> <http://buildhw-09.phx2.fedoraproject.org>
> >>>>>> 09/06/2015 11:16:20 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_set_param_from_conf :NFS STARTUP :EVENT
> >>>>>> :Configuration file successfully parsed
> >>>>>> 09/06/2015 11:16:20 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] init_server_pkgs :NFS STARTUP :EVENT
> >>>>>> :Initializing ID Mapper.
> >>>>>> 09/06/2015 11:16:20 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] init_server_pkgs :NFS STARTUP :EVENT :ID Mapper
> >>>>>> successfully initialized.
> >>>>>> 09/06/2015 11:16:20 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] main :NFS STARTUP :WARN :No export entries
> >>>>>> found in configuration file !!!
> >>>>>> 09/06/2015 11:16:20 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] config_errs_to_log :CONFIG :WARN :Config File
> >>>>>> ((null):0): Empty configuration file
> >>>>>> 09/06/2015 11:16:20 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] lower_my_caps :NFS STARTUP :EVENT
> >>>>>> :CAP_SYS_RESOURCE was successfully removed for proper quota management
> >>>>>> in FSAL
> >>>>>> 09/06/2015 11:16:20 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] lower_my_caps :NFS STARTUP :EVENT :currenty set
> >>>>>> capabilities are: =
> >>>>>> cap_chown,cap_dac_override,cap_dac_read_search,cap_fowner,cap_fsetid,cap_kill,cap_setgid,cap_setuid,cap_setpcap,cap_linux_immutable,cap_net_bind_service,cap_net_broadcast,cap_net_admin,cap_net_raw,cap_ipc_lock,cap_ipc_owner,cap_sys_module,cap_sys_rawio,cap_sys_chroot,cap_sys_ptrace,cap_sys_pacct,cap_sys_admin,cap_sys_boot,cap_sys_nice,cap_sys_time,cap_sys_tty_config,cap_mknod,cap_lease,cap_audit_write,cap_audit_control,cap_setfcap+ep
> >>>>>> 09/06/2015 11:16:21 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_Init_svc :DISP :CRIT :Cannot acquire
> >>>>>> credentials for principal nfs
> >>>>>> 09/06/2015 11:16:21 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_Init_admin_thread :NFS CB :EVENT :Admin
> >>>>>> thread initialized
> >>>>>> 09/06/2015 11:16:21 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs4_start_grace :STATE :EVENT :NFS Server Now
> >>>>>> IN GRACE, duration 60
> >>>>>> 09/06/2015 11:16:21 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_rpc_cb_init_ccache :NFS STARTUP :EVENT
> >>>>>> :Callback creds directory (/var/run/ganesha) already exists
> >>>>>> 09/06/2015 11:16:21 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_rpc_cb_init_ccache :NFS STARTUP :WARN
> >>>>>> :gssd_refresh_krb5_machine_credential failed (2:2)
> >>>>>> 09/06/2015 11:16:21 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_Start_threads :THREAD :EVENT :Starting
> >>>>>> delayed executor.
> >>>>>> 09/06/2015 11:16:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_Start_threads :THREAD :EVENT :9P/TCP
> >>>>>> dispatcher thread was started successfully
> >>>>>> 09/06/2015 11:16:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[_9p_disp] _9p_dispatcher_thread :9P DISP :EVENT :9P
> >>>>>> dispatcher started
> >>>>>> 09/06/2015 11:16:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_Start_threads :THREAD :EVENT
> >>>>>> :gsh_dbusthread was started successfully
> >>>>>> 09/06/2015 11:16:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_Start_threads :THREAD :EVENT :admin thread
> >>>>>> was started successfully
> >>>>>> 09/06/2015 11:16:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_Start_threads :THREAD :EVENT :reaper thread
> >>>>>> was started successfully
> >>>>>> 09/06/2015 11:16:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[reaper] nfs_in_grace :STATE :EVENT :NFS Server Now IN
> >>>>>> GRACE
> >>>>>> 09/06/2015 11:16:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_Start_threads :THREAD :EVENT :General
> >>>>>> fridge was started successfully
> >>>>>> 09/06/2015 11:16:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_start :NFS STARTUP :EVENT
> >>>>>> :-------------------------------------------------
> >>>>>> 09/06/2015 11:16:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_start :NFS STARTUP :EVENT :             NFS
> >>>>>> SERVER INITIALIZED
> >>>>>> 09/06/2015 11:16:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[main] nfs_start :NFS STARTUP :EVENT
> >>>>>> :-------------------------------------------------
> >>>>>> 09/06/2015 11:17:22 : epoch 5576aee4 : atlas-node1 :
> >>>>>> ganesha.nfsd-29965[reaper] nfs_in_grace :STATE :EVENT :NFS Server Now
> >>>>>> NOT IN GRACE
> >>>>>>
> >>>>>>
> >>>>> Please check the status of nfs-ganesha
> >>>>> $service nfs-ganesha status
> >>>>>
> >>>>> Could you try taking a packet trace (during showmount or mount) and
> >>>>> check the server responses.
> >>>>>
> >>>>> Thanks,
> >>>>> Soumya
> >>>>>
> >>>>>> Cheers,
> >>>>>>
> >>>>>> Alessandro
> >>>>>>
> >>>>>>
> >>>>>>> Il giorno 09/giu/2015, alle ore 10:36, Alessandro De Salvo
> >>>>>>> <alessandro.desalvo at roma1.infn.it
> >>>>>>> <mailto:alessandro.desalvo at roma1.infn.it>> ha scritto:
> >>>>>>>
> >>>>>>> Hi Soumya,
> >>>>>>>
> >>>>>>>> Il giorno 09/giu/2015, alle ore 08:06, Soumya Koduri
> >>>>>>>> <skoduri at redhat.com <mailto:skoduri at redhat.com>> ha scritto:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On 06/09/2015 01:31 AM, Alessandro De Salvo wrote:
> >>>>>>>>> OK, I found at least one of the bugs.
> >>>>>>>>> The /usr/libexec/ganesha/ganesha.sh has the following lines:
> >>>>>>>>>
> >>>>>>>>>     if [ -e /etc/os-release ]; then
> >>>>>>>>>         RHEL6_PCS_CNAME_OPTION=""
> >>>>>>>>>     fi
> >>>>>>>>>
> >>>>>>>>> This is OK for RHEL < 7, but does not work for >= 7. I have changed
> >>>>>>>>> it to the following, to make it working:
> >>>>>>>>>
> >>>>>>>>>     if [ -e /etc/os-release ]; then
> >>>>>>>>>         eval $(grep -F "REDHAT_SUPPORT_PRODUCT=" /etc/os-release)
> >>>>>>>>>         [ "$REDHAT_SUPPORT_PRODUCT" == "Fedora" ] &&
> >>>>>>>>> RHEL6_PCS_CNAME_OPTION=""
> >>>>>>>>>     fi
> >>>>>>>>>
> >>>>>>>> Oh..Thanks for the fix. Could you please file a bug for the same (and
> >>>>>>>> probably submit your fix as well). We shall have it corrected.
> >>>>>>>
> >>>>>>> Just did it,https://bugzilla.redhat.com/show_bug.cgi?id=1229601
> >>>>>>>
> >>>>>>>>
> >>>>>>>>> Apart from that, the VIP_<node> I was using were wrong, and I should
> >>>>>>>>> have converted all the “-“ to underscores, maybe this could be
> >>>>>>>>> mentioned in the documentation when you will have it ready.
> >>>>>>>>> Now, the cluster starts, but the VIPs apparently not:
> >>>>>>>>>
> >>>>>>>> Sure. Thanks again for pointing it out. We shall make a note of it.
> >>>>>>>>
> >>>>>>>>> Online: [ atlas-node1 atlas-node2 ]
> >>>>>>>>>
> >>>>>>>>> Full list of resources:
> >>>>>>>>>
> >>>>>>>>> Clone Set: nfs-mon-clone [nfs-mon]
> >>>>>>>>>      Started: [ atlas-node1 atlas-node2 ]
> >>>>>>>>> Clone Set: nfs-grace-clone [nfs-grace]
> >>>>>>>>>      Started: [ atlas-node1 atlas-node2 ]
> >>>>>>>>> atlas-node1-cluster_ip-1  (ocf::heartbeat:IPaddr):        Stopped
> >>>>>>>>> atlas-node1-trigger_ip-1  (ocf::heartbeat:Dummy): Started atlas-node1
> >>>>>>>>> atlas-node2-cluster_ip-1  (ocf::heartbeat:IPaddr):        Stopped
> >>>>>>>>> atlas-node2-trigger_ip-1  (ocf::heartbeat:Dummy): Started atlas-node2
> >>>>>>>>> atlas-node1-dead_ip-1     (ocf::heartbeat:Dummy): Started atlas-node1
> >>>>>>>>> atlas-node2-dead_ip-1     (ocf::heartbeat:Dummy): Started atlas-node2
> >>>>>>>>>
> >>>>>>>>> PCSD Status:
> >>>>>>>>>   atlas-node1: Online
> >>>>>>>>>   atlas-node2: Online
> >>>>>>>>>
> >>>>>>>>> Daemon Status:
> >>>>>>>>>   corosync: active/disabled
> >>>>>>>>>   pacemaker: active/disabled
> >>>>>>>>>   pcsd: active/enabled
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>> Here corosync and pacemaker shows 'disabled' state. Can you check the
> >>>>>>>> status of their services. They should be running prior to cluster
> >>>>>>>> creation. We need to include that step in document as well.
> >>>>>>>
> >>>>>>> Ah, OK, you’re right, I have added it to my puppet modules (we install
> >>>>>>> and configure ganesha via puppet, I’ll put the module on puppetforge
> >>>>>>> soon, in case anyone is interested).
> >>>>>>>
> >>>>>>>>
> >>>>>>>>> But the issue that is puzzling me more is the following:
> >>>>>>>>>
> >>>>>>>>> # showmount -e localhost
> >>>>>>>>> rpc mount export: RPC: Timed out
> >>>>>>>>>
> >>>>>>>>> And when I try to enable the ganesha exports on a volume I get this
> >>>>>>>>> error:
> >>>>>>>>>
> >>>>>>>>> # gluster volume set atlas-home-01 ganesha.enable on
> >>>>>>>>> volume set: failed: Failed to create NFS-Ganesha export config file.
> >>>>>>>>>
> >>>>>>>>> But I see the file created in /etc/ganesha/exports/*.conf
> >>>>>>>>> Still, showmount hangs and times out.
> >>>>>>>>> Any help?
> >>>>>>>>> Thanks,
> >>>>>>>>>
> >>>>>>>> Hmm that's strange. Sometimes, in case if there was no proper cleanup
> >>>>>>>> done while trying to re-create the cluster, we have seen such issues.
> >>>>>>>>
> >>>>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1227709
> >>>>>>>>
> >>>>>>>> http://review.gluster.org/#/c/11093/
> >>>>>>>>
> >>>>>>>> Can you please unexport all the volumes, teardown the cluster using
> >>>>>>>> 'gluster vol set <volname> ganesha.enable off’
> >>>>>>>
> >>>>>>> OK:
> >>>>>>>
> >>>>>>> # gluster vol set atlas-home-01 ganesha.enable off
> >>>>>>> volume set: failed: ganesha.enable is already 'off'.
> >>>>>>>
> >>>>>>> # gluster vol set atlas-data-01 ganesha.enable off
> >>>>>>> volume set: failed: ganesha.enable is already 'off'.
> >>>>>>>
> >>>>>>>
> >>>>>>>> 'gluster ganesha disable' command.
> >>>>>>>
> >>>>>>> I’m assuming you wanted to write nfs-ganesha instead?
> >>>>>>>
> >>>>>>> # gluster nfs-ganesha disable
> >>>>>>> ganesha enable : success
> >>>>>>>
> >>>>>>>
> >>>>>>> A side note (not really important): it’s strange that when I do a
> >>>>>>> disable the message is “ganesha enable” :-)
> >>>>>>>
> >>>>>>>>
> >>>>>>>> Verify if the following files have been deleted on all the nodes-
> >>>>>>>> '/etc/cluster/cluster.conf’
> >>>>>>>
> >>>>>>> this file is not present at all, I think it’s not needed in CentOS 7
> >>>>>>>
> >>>>>>>> '/etc/ganesha/ganesha.conf’,
> >>>>>>>
> >>>>>>> it’s still there, but empty, and I guess it should be OK, right?
> >>>>>>>
> >>>>>>>> '/etc/ganesha/exports/*’
> >>>>>>>
> >>>>>>> no more files there
> >>>>>>>
> >>>>>>>> '/var/lib/pacemaker/cib’
> >>>>>>>
> >>>>>>> it’s empty
> >>>>>>>
> >>>>>>>>
> >>>>>>>> Verify if the ganesha service is stopped on all the nodes.
> >>>>>>>
> >>>>>>> nope, it’s still running, I will stop it.
> >>>>>>>
> >>>>>>>>
> >>>>>>>> start/restart the services - corosync, pcs.
> >>>>>>>
> >>>>>>> In the node where I issued the nfs-ganesha disable there is no more
> >>>>>>> any /etc/corosync/corosync.conf so corosync won’t start. The other
> >>>>>>> node instead still has the file, it’s strange.
> >>>>>>>
> >>>>>>>>
> >>>>>>>> And re-try the HA cluster creation
> >>>>>>>> 'gluster ganesha enable’
> >>>>>>>
> >>>>>>> This time (repeated twice) it did not work at all:
> >>>>>>>
> >>>>>>> # pcs status
> >>>>>>> Cluster name: ATLAS_GANESHA_01
> >>>>>>> Last updated: Tue Jun  9 10:13:43 2015
> >>>>>>> Last change: Tue Jun  9 10:13:22 2015
> >>>>>>> Stack: corosync
> >>>>>>> Current DC: atlas-node1 (1) - partition with quorum
> >>>>>>> Version: 1.1.12-a14efad
> >>>>>>> 2 Nodes configured
> >>>>>>> 6 Resources configured
> >>>>>>>
> >>>>>>>
> >>>>>>> Online: [ atlas-node1 atlas-node2 ]
> >>>>>>>
> >>>>>>> Full list of resources:
> >>>>>>>
> >>>>>>> Clone Set: nfs-mon-clone [nfs-mon]
> >>>>>>>      Started: [ atlas-node1 atlas-node2 ]
> >>>>>>> Clone Set: nfs-grace-clone [nfs-grace]
> >>>>>>>      Started: [ atlas-node1 atlas-node2 ]
> >>>>>>> atlas-node2-dead_ip-1     (ocf::heartbeat:Dummy): Started atlas-node1
> >>>>>>> atlas-node1-dead_ip-1     (ocf::heartbeat:Dummy): Started atlas-node2
> >>>>>>>
> >>>>>>> PCSD Status:
> >>>>>>>   atlas-node1: Online
> >>>>>>>   atlas-node2: Online
> >>>>>>>
> >>>>>>> Daemon Status:
> >>>>>>>   corosync: active/enabled
> >>>>>>>   pacemaker: active/enabled
> >>>>>>>   pcsd: active/enabled
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> I tried then "pcs cluster destroy" on both nodes, and then again
> >>>>>>> nfs-ganesha enable, but now I’m back to the old problem:
> >>>>>>>
> >>>>>>> # pcs status
> >>>>>>> Cluster name: ATLAS_GANESHA_01
> >>>>>>> Last updated: Tue Jun  9 10:22:27 2015
> >>>>>>> Last change: Tue Jun  9 10:17:00 2015
> >>>>>>> Stack: corosync
> >>>>>>> Current DC: atlas-node2 (2) - partition with quorum
> >>>>>>> Version: 1.1.12-a14efad
> >>>>>>> 2 Nodes configured
> >>>>>>> 10 Resources configured
> >>>>>>>
> >>>>>>>
> >>>>>>> Online: [ atlas-node1 atlas-node2 ]
> >>>>>>>
> >>>>>>> Full list of resources:
> >>>>>>>
> >>>>>>> Clone Set: nfs-mon-clone [nfs-mon]
> >>>>>>>      Started: [ atlas-node1 atlas-node2 ]
> >>>>>>> Clone Set: nfs-grace-clone [nfs-grace]
> >>>>>>>      Started: [ atlas-node1 atlas-node2 ]
> >>>>>>> atlas-node1-cluster_ip-1       (ocf::heartbeat:IPaddr):        Stopped
> >>>>>>> atlas-node1-trigger_ip-1       (ocf::heartbeat:Dummy): Started atlas-node1
> >>>>>>> atlas-node2-cluster_ip-1       (ocf::heartbeat:IPaddr):        Stopped
> >>>>>>> atlas-node2-trigger_ip-1       (ocf::heartbeat:Dummy): Started atlas-node2
> >>>>>>> atlas-node1-dead_ip-1  (ocf::heartbeat:Dummy): Started atlas-node1
> >>>>>>> atlas-node2-dead_ip-1  (ocf::heartbeat:Dummy): Started atlas-node2
> >>>>>>>
> >>>>>>> PCSD Status:
> >>>>>>>   atlas-node1: Online
> >>>>>>>   atlas-node2: Online
> >>>>>>>
> >>>>>>> Daemon Status:
> >>>>>>>   corosync: active/enabled
> >>>>>>>   pacemaker: active/enabled
> >>>>>>>   pcsd: active/enabled
> >>>>>>>
> >>>>>>>
> >>>>>>> Cheers,
> >>>>>>>
> >>>>>>> Alessandro
> >>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> Thanks,
> >>>>>>>> Soumya
> >>>>>>>>
> >>>>>>>>> Alessandro
> >>>>>>>>>
> >>>>>>>>>> Il giorno 08/giu/2015, alle ore 20:00, Alessandro De Salvo
> >>>>>>>>>> <Alessandro.DeSalvo at roma1.infn.it
> >>>>>>>>>> <mailto:Alessandro.DeSalvo at roma1.infn.it>> ha scritto:
> >>>>>>>>>>
> >>>>>>>>>> Hi,
> >>>>>>>>>> indeed, it does not work :-)
> >>>>>>>>>> OK, this is what I did, with 2 machines, running CentOS 7.1,
> >>>>>>>>>> Glusterfs 3.7.1 and nfs-ganesha 2.2.0:
> >>>>>>>>>>
> >>>>>>>>>> 1) ensured that the machines are able to resolve their IPs (but
> >>>>>>>>>> this was already true since they were in the DNS);
> >>>>>>>>>> 2) disabled NetworkManager and enabled network on both machines;
> >>>>>>>>>> 3) created a gluster shared volume 'gluster_shared_storage' and
> >>>>>>>>>> mounted it on '/run/gluster/shared_storage' on all the cluster
> >>>>>>>>>> nodes using glusterfs native mount (on CentOS 7.1 there is a link
> >>>>>>>>>> by default /var/run -> ../run)
> >>>>>>>>>> 4) created an empty /etc/ganesha/ganesha.conf;
> >>>>>>>>>> 5) installed pacemaker pcs resource-agents corosync on all cluster
> >>>>>>>>>> machines;
> >>>>>>>>>> 6) set the ‘hacluster’ user the same password on all machines;
> >>>>>>>>>> 7) pcs cluster auth <hostname> -u hacluster -p <pass> on all the
> >>>>>>>>>> nodes (on both nodes I issued the commands for both nodes)
> >>>>>>>>>> 8) IPv6 is configured by default on all nodes, although the
> >>>>>>>>>> infrastructure is not ready for IPv6
> >>>>>>>>>> 9) enabled pcsd and started it on all nodes
> >>>>>>>>>> 10) populated /etc/ganesha/ganesha-ha.conf with the following
> >>>>>>>>>> contents, one per machine:
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> ===> atlas-node1
> >>>>>>>>>> # Name of the HA cluster created.
> >>>>>>>>>> HA_NAME="ATLAS_GANESHA_01"
> >>>>>>>>>> # The server from which you intend to mount
> >>>>>>>>>> # the shared volume.
> >>>>>>>>>> HA_VOL_SERVER=“atlas-node1"
> >>>>>>>>>> # The subset of nodes of the Gluster Trusted Pool
> >>>>>>>>>> # that forms the ganesha HA cluster. IP/Hostname
> >>>>>>>>>> # is specified.
> >>>>>>>>>> HA_CLUSTER_NODES=“atlas-node1,atlas-node2"
> >>>>>>>>>> # Virtual IPs of each of the nodes specified above.
> >>>>>>>>>> VIP_atlas-node1=“x.x.x.1"
> >>>>>>>>>> VIP_atlas-node2=“x.x.x.2"
> >>>>>>>>>>
> >>>>>>>>>> ===> atlas-node2
> >>>>>>>>>> # Name of the HA cluster created.
> >>>>>>>>>> HA_NAME="ATLAS_GANESHA_01"
> >>>>>>>>>> # The server from which you intend to mount
> >>>>>>>>>> # the shared volume.
> >>>>>>>>>> HA_VOL_SERVER=“atlas-node2"
> >>>>>>>>>> # The subset of nodes of the Gluster Trusted Pool
> >>>>>>>>>> # that forms the ganesha HA cluster. IP/Hostname
> >>>>>>>>>> # is specified.
> >>>>>>>>>> HA_CLUSTER_NODES=“atlas-node1,atlas-node2"
> >>>>>>>>>> # Virtual IPs of each of the nodes specified above.
> >>>>>>>>>> VIP_atlas-node1=“x.x.x.1"
> >>>>>>>>>> VIP_atlas-node2=“x.x.x.2”
> >>>>>>>>>>
> >>>>>>>>>> 11) issued gluster nfs-ganesha enable, but it fails with a cryptic
> >>>>>>>>>> message:
> >>>>>>>>>>
> >>>>>>>>>> # gluster nfs-ganesha enable
> >>>>>>>>>> Enabling NFS-Ganesha requires Gluster-NFS to be disabled across the
> >>>>>>>>>> trusted pool. Do you still want to continue? (y/n) y
> >>>>>>>>>> nfs-ganesha: failed: Failed to set up HA config for NFS-Ganesha.
> >>>>>>>>>> Please check the log file for details
> >>>>>>>>>>
> >>>>>>>>>> Looking at the logs I found nothing really special but this:
> >>>>>>>>>>
> >>>>>>>>>> ==> /var/log/glusterfs/etc-glusterfs-glusterd.vol.log <==
> >>>>>>>>>> [2015-06-08 17:57:15.672844] I [MSGID: 106132]
> >>>>>>>>>> [glusterd-proc-mgmt.c:83:glusterd_proc_stop] 0-management: nfs
> >>>>>>>>>> already stopped
> >>>>>>>>>> [2015-06-08 17:57:15.675395] I
> >>>>>>>>>> [glusterd-ganesha.c:386:check_host_list] 0-management: ganesha host
> >>>>>>>>>> found Hostname is atlas-node2
> >>>>>>>>>> [2015-06-08 17:57:15.720692] I
> >>>>>>>>>> [glusterd-ganesha.c:386:check_host_list] 0-management: ganesha host
> >>>>>>>>>> found Hostname is atlas-node2
> >>>>>>>>>> [2015-06-08 17:57:15.721161] I
> >>>>>>>>>> [glusterd-ganesha.c:335:is_ganesha_host] 0-management: ganesha host
> >>>>>>>>>> found Hostname is atlas-node2
> >>>>>>>>>> [2015-06-08 17:57:16.633048] E
> >>>>>>>>>> [glusterd-ganesha.c:254:glusterd_op_set_ganesha] 0-management:
> >>>>>>>>>> Initial NFS-Ganesha set up failed
> >>>>>>>>>> [2015-06-08 17:57:16.641563] E
> >>>>>>>>>> [glusterd-syncop.c:1396:gd_commit_op_phase] 0-management: Commit of
> >>>>>>>>>> operation 'Volume (null)' failed on localhost : Failed to set up HA
> >>>>>>>>>> config for NFS-Ganesha. Please check the log file for details
> >>>>>>>>>>
> >>>>>>>>>> ==> /var/log/glusterfs/cmd_history.log <==
> >>>>>>>>>> [2015-06-08 17:57:16.643615]  : nfs-ganesha enable : FAILED :
> >>>>>>>>>> Failed to set up HA config for NFS-Ganesha. Please check the log
> >>>>>>>>>> file for details
> >>>>>>>>>>
> >>>>>>>>>> ==> /var/log/glusterfs/cli.log <==
> >>>>>>>>>> [2015-06-08 17:57:16.643839] I [input.c:36:cli_batch] 0-: Exiting
> >>>>>>>>>> with: -1
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> Also, pcs seems to be fine for the auth part, although it obviously
> >>>>>>>>>> tells me the cluster is not running.
> >>>>>>>>>>
> >>>>>>>>>> I, [2015-06-08T19:57:16.305323 #7223]  INFO -- : Running:
> >>>>>>>>>> /usr/sbin/corosync-cmapctl totem.cluster_name
> >>>>>>>>>> I, [2015-06-08T19:57:16.345457 #7223]  INFO -- : Running:
> >>>>>>>>>> /usr/sbin/pcs cluster token-nodes
> >>>>>>>>>> ::ffff:141.108.38.46 - - [08/Jun/2015 19:57:16] "GET
> >>>>>>>>>> /remote/check_auth HTTP/1.1" 200 68 0.1919
> >>>>>>>>>> ::ffff:141.108.38.46 - - [08/Jun/2015 19:57:16] "GET
> >>>>>>>>>> /remote/check_auth HTTP/1.1" 200 68 0.1920
> >>>>>>>>>> atlas-node1.mydomain - - [08/Jun/2015:19:57:16 CEST] "GET
> >>>>>>>>>> /remote/check_auth HTTP/1.1" 200 68
> >>>>>>>>>> - -> /remote/check_auth
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> What am I doing wrong?
> >>>>>>>>>> Thanks,
> >>>>>>>>>>
> >>>>>>>>>> Alessandro
> >>>>>>>>>>
> >>>>>>>>>>> Il giorno 08/giu/2015, alle ore 19:30, Soumya Koduri
> >>>>>>>>>>> <skoduri at redhat.com <mailto:skoduri at redhat.com>> ha scritto:
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On 06/08/2015 08:20 PM, Alessandro De Salvo wrote:
> >>>>>>>>>>>> Sorry, just another question:
> >>>>>>>>>>>>
> >>>>>>>>>>>> - in my installation of gluster 3.7.1 the command gluster
> >>>>>>>>>>>> features.ganesha enable does not work:
> >>>>>>>>>>>>
> >>>>>>>>>>>> # gluster features.ganesha enable
> >>>>>>>>>>>> unrecognized word: features.ganesha (position 0)
> >>>>>>>>>>>>
> >>>>>>>>>>>> Which version has full support for it?
> >>>>>>>>>>>
> >>>>>>>>>>> Sorry. This option has recently been changed. It is now
> >>>>>>>>>>>
> >>>>>>>>>>> $ gluster nfs-ganesha enable
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> - in the documentation the ccs and cman packages are required,
> >>>>>>>>>>>> but they seems not to be available anymore on CentOS 7 and
> >>>>>>>>>>>> similar, I guess they are not really required anymore, as pcs
> >>>>>>>>>>>> should do the full job
> >>>>>>>>>>>>
> >>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>
> >>>>>>>>>>>> Alessandro
> >>>>>>>>>>>
> >>>>>>>>>>> Looks like so from http://clusterlabs.org/quickstart-redhat.html.
> >>>>>>>>>>> Let us know if it doesn't work.
> >>>>>>>>>>>
> >>>>>>>>>>> Thanks,
> >>>>>>>>>>> Soumya
> >>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>> Il giorno 08/giu/2015, alle ore 15:09, Alessandro De Salvo
> >>>>>>>>>>>>> <alessandro.desalvo at roma1.infn.it
> >>>>>>>>>>>>> <mailto:alessandro.desalvo at roma1.infn.it>> ha scritto:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Great, many thanks Soumya!
> >>>>>>>>>>>>> Cheers,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Alessandro
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>> Il giorno 08/giu/2015, alle ore 13:53, Soumya Koduri
> >>>>>>>>>>>>>> <skoduri at redhat.com <mailto:skoduri at redhat.com>> ha scritto:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Hi,
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Please find the slides of the demo video at [1]
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> We recommend to have a distributed replica volume as a shared
> >>>>>>>>>>>>>> volume for better data-availability.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Size of the volume depends on the workload you may have. Since
> >>>>>>>>>>>>>> it is used to maintain states of NLM/NFSv4 clients, you may
> >>>>>>>>>>>>>> calculate the size of the volume to be minimum of aggregate of
> >>>>>>>>>>>>>> (typical_size_of'/var/lib/nfs'_directory +
> >>>>>>>>>>>>>> ~4k*no_of_clients_connected_to_each_of_the_nfs_servers_at_any_point)
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> We shall document about this feature sooner in the gluster docs
> >>>>>>>>>>>>>> as well.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>>> Soumya
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> [1] - http://www.slideshare.net/SoumyaKoduri/high-49117846
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> On 06/08/2015 04:34 PM, Alessandro De Salvo wrote:
> >>>>>>>>>>>>>>> Hi,
> >>>>>>>>>>>>>>> I have seen the demo video on ganesha HA,
> >>>>>>>>>>>>>>> https://www.youtube.com/watch?v=Z4mvTQC-efM
> >>>>>>>>>>>>>>> However there is no advice on the appropriate size of the
> >>>>>>>>>>>>>>> shared volume. How is it really used, and what should be a
> >>>>>>>>>>>>>>> reasonable size for it?
> >>>>>>>>>>>>>>> Also, are the slides from the video available somewhere, as
> >>>>>>>>>>>>>>> well as a documentation on all this? I did not manage to find
> >>>>>>>>>>>>>>> them.
> >>>>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Alessandro
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>>>> Gluster-users mailing list
> >>>>>>>>>>>>>>> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org>
> >>>>>>>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> _______________________________________________
> >>>>>>>>>> Gluster-users mailing list
> >>>>>>>>>> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org>
> >>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
> >>>>>>>>>
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> Gluster-users mailing list
> >>>>>>> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org>
> >>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
> >>>>>>
> >>>>
> >>>> _______________________________________________
> >>>> Gluster-users mailing list
> >>>> Gluster-users at gluster.org
> >>>> http://www.gluster.org/mailman/listinfo/gluster-users
> >>>
> >>>
> >




More information about the Gluster-users mailing list