[Gluster-users] Quota

Geoffrey Letessier geoffrey.letessier at cnrs.fr
Mon Jul 13 18:38:19 UTC 2015


Additional information:

Here what i can find in /var/log/glusterfs/vol_home-quota-crawl.log:
[2015-07-13 16:41:08.099848] W [rdma.c:121:gf_rdma_new_post] 0-vol_home-client-0: memory registration failed (Ne peut allouer de la mémoire)
[2015-07-13 16:41:08.099899] E [rdma.c:333:__gf_rdma_create_posts] 0-vol_home-client-0: post creation failed
[2015-07-13 16:41:51.692421] E [rdma.c:796:gf_rdma_get_device] 0-vol_home-client-0: could not allocate posts for device (qib0)
[2015-07-13 16:41:51.693331] I [mem-pool.c:604:mem_pool_destroy] 0-glusterfs: size=1404 max=0 total=0
[2015-07-13 16:41:51.693391] I [mem-pool.c:604:mem_pool_destroy] 0-glusterfs: size=132 max=0 total=0
[2015-07-13 16:41:51.696491] I [mem-pool.c:604:mem_pool_destroy] 0-glusterfs: size=52 max=0 total=0
[2015-07-13 16:41:51.697378] W [rdma.c:3141:gf_rdma_create_qp] 0-vol_home-client-0: cannot get device for device qib0
[2015-07-13 16:41:51.697394] W [rdma.c:1047:gf_rdma_cm_handle_route_resolved] 0-vol_home-client-0: could not create QP (peer:10.0.4.1:24008 me:10.0.4.1:988)

Is RDMA afresh supported? or do you advice me to set TCP as transport-type? If you advice me to change the transport-type, can you explain me how to do it step-by-step because I set my volume with rdma only as transport-type…

Thanks in advance,
Geoffrey

------------------------------------------------------
Geoffrey Letessier
Responsable informatique & ingénieur système
UPR 9080 - CNRS - Laboratoire de Biochimie Théorique
Institut de Biologie Physico-Chimique
13, rue Pierre et Marie Curie - 75005 Paris
Tel: 01 58 41 50 93 - eMail: geoffrey.letessier at ibpc.fr

Le 13 juil. 2015 à 20:25, Geoffrey Letessier <geoffrey.letessier at cnrs.fr> a écrit :

> Arf, now, without quota features enabled, my system hangs with a DF, a LS on, etc..
> Here is the result of strace command:
> statfs("/archive/sterpone_team", {f_type="NFS_SUPER_MAGIC", f_bsize=1048576, f_blocks=36700160, f_bfree=22460451, f_bavail=22460451, f_files=45999237162, f_ffree=45999003257, f_fsid={0, 0}, f_namelen=255, f_frsize=1048576}) = 0
> statfs("/archive/amyloid_team", {f_type="NFS_SUPER_MAGIC", f_bsize=1048576, f_blocks=7340032, f_bfree=3258562, f_bavail=3258562, f_files=6676333171, f_ffree=6673534246, f_fsid={0, 0}, f_namelen=255, f_frsize=1048576}) = 0
> statfs("/home", {f_type=0x65735546, f_bsize=131072, f_blocks=602107776, f_bfree=602106710, f_bavail=602106710, f_files=7707031808, f_ffree=7707031719, f_fsid={0, 0}, f_namelen=255, f_frsize=131072}) = 0
> statfs("/tmp/mntqM2nAB", 
> 
> 
> 
> 
> 
> 
> ^C <unfinished ...>
> 
> As you can note, a mount point to /mnt/mntqM2nAB that i dont know appears to exist… Do you have an idea of what it is form?
> 
> Here is an extract of /etc/mtab file:
> localhost:vol_home.rdma /home fuse.glusterfs rw,default_permissions,allow_other,max_read=131072 0 0
> localhost:vol_home /tmp/mntqM2nAB fuse.glusterfs rw,default_permissions,allow_other,max_read=131072 0 0
> localhost:vol_home /tmp/mnt88HLLE fuse.glusterfs rw,default_permissions,allow_other,max_read=131072 0 0
> 
> 
> Geoffrey
> ------------------------------------------------------
> Geoffrey Letessier
> Responsable informatique & ingénieur système
> UPR 9080 - CNRS - Laboratoire de Biochimie Théorique
> Institut de Biologie Physico-Chimique
> 13, rue Pierre et Marie Curie - 75005 Paris
> Tel: 01 58 41 50 93 - eMail: geoffrey.letessier at ibpc.fr
> 
> Le 13 juil. 2015 à 16:45, Atin Mukherjee <atin.mukherjee83 at gmail.com> a écrit :
> 
>> 
>> -Atin
>> Sent from one plus one
>> On Jul 13, 2015 8:08 PM, "Geoffrey Letessier" <geoffrey.letessier at cnrs.fr> wrote:
>> >
>> > Hi Atin,
>> >
>> > First of all, thanks for your reply and for your help.
>> > Now, after having set features.quota-deem-statfs to on, my df hang:
>> >
>> > # gluster volume set vol_home features.quota-deem-statfs on;
>> > volume set: success
>> > [root at lucifer ~]# df
>> I am not a quota expert, Vijaikumar can help you on this. However 'strace df' might give you a hint where exactly its stuck.
>> >
>> > An idea? :)
>> >
>> > Thanks in advance,
>> > Geoffrey
>> > ------------------------------------------------------
>> > Geoffrey Letessier
>> > Responsable informatique & ingénieur système
>> > UPR 9080 - CNRS - Laboratoire de Biochimie Théorique
>> > Institut de Biologie Physico-Chimique
>> > 13, rue Pierre et Marie Curie - 75005 Paris
>> > Tel: 01 58 41 50 93 - eMail: geoffrey.letessier at ibpc.fr
>> >
>> >> Le 13 juil. 2015 à 16:29, Atin Mukherjee <atin.mukherjee83 at gmail.com> a écrit :
>> >>
>> >> Please bump up the op version by Gluster volume set all cluster.op-version 30702
>> >>
>> >> -Atin
>> >> Sent from one plus one
>> >>
>> >> On Jul 13, 2015 7:43 PM, "Geoffrey Letessier" <geoffrey.letessier at cnrs.fr> wrote:
>> >>>
>> >>> Dear all,
>> >>>
>> >>> I just upgraded my storage cluster from 3.5.3 to the latest version of GlusterFS (3.7.2-3) but when I want to activate quota info my volume I obtain this result:
>> >>> # gluster volume quota vol_home enable
>> >>> quota command failed : Volume quota failed. The cluster is operating at version 3. Quota command enable is unavailable in this version.
>> >>>
>> >>> Can you give me your help?
>> >>>
>> >>> Thanks in advance,
>> >>> Geoffrey
>> >>> ------------------------------------------------------
>> >>> Geoffrey Letessier
>> >>> Responsable informatique & ingénieur système
>> >>> UPR 9080 - CNRS - Laboratoire de Biochimie Théorique
>> >>> Institut de Biologie Physico-Chimique
>> >>> 13, rue Pierre et Marie Curie - 75005 Paris
>> >>> Tel: 01 58 41 50 93 - eMail: geoffrey.letessier at ibpc.fr
>> >>>
>> >>>
>> >>> _______________________________________________
>> >>> Gluster-users mailing list
>> >>> Gluster-users at gluster.org
>> >>> http://www.gluster.org/mailman/listinfo/gluster-users
>> >
>> >
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20150713/e29bfd2f/attachment.html>


More information about the Gluster-users mailing list