[Gluster-users] Slef-heal still not finished after 2 days

Pranith Kumar Karampuri pkarampu at redhat.com
Mon Jun 30 04:03:53 UTC 2014 

On 06/30/2014 09:17 AM, John Gardeniers wrote:
> Hi Pranith,
>
> On 30/06/14 13:37, Pranith Kumar Karampuri wrote:
>> On 06/30/2014 08:48 AM, John Gardeniers wrote:
>>> Hi again Pranith,
>>>
>>> On 30/06/14 11:58, Pranith Kumar Karampuri wrote:
>>>> Oops, I see you are the same user who posted about VM files self-heal.
>>>> Sorry I couldn't get back in time. So you are using 3.4.2.
>>>> Could you post logfiles of mount, bricks please. That should help us
>>>> to find more information about any issues.
>>>>
>>> When you say the log for the mount, which log is that? There are none
>>> that I can identify with the mount.
>>>
>>>> gluster volume heal <volname> info heal-failed records the last 1024
>>>> failures. It also prints the timestamp of when the failures occurred.
>>>> Even after the heal is successful it keeps showing the errors. So
>>>> timestamp of when the heal failed is important. Because some of these
>>>> commands are causing such confusion we depracated these commands in
>>>> upcoming releases (3.6).
>>>>
>>> So far I've been focusing on the heal-failed count, which I fully, and I
>>> believe understandably, expect to show zero when there are no errors.
>>> Now that I look at the timestamps of those errors I realise they are all
>>> from *before* the slave brick was added back in. May I assume then that
>>> in reality there are no unhealed files? If this is correct, I must point
>>> out that if errors are reported when there are none that is a massive
>>> design flaw. It means things like nagios checks, such as the one we use,
>>> are useless. This makes monitoring near enough to impossible.
>> Exactly, that is why we deprecated it. The goal is to show only the
>> files that need to be healed, which is achieved in 3.5.1.
>> Just "gluster volume heal info". It shows the exact number of
>> files/directories that need to be healed. Once it becomes zero,
>> we know the healing is complete. But all of these are useful only when
>> the brick is not erased. We still need to improve at monitoring
>> when the brick is erased and we trigger full volume self-heal using
>> "gluster volume heal <volname> full" like you did.
>>
>> Raised the following bug:
>> https://bugzilla.redhat.com/show_bug.cgi?id=1114415 to address the same.
>>
>> Thanks a lot for you inputs John. We shall fix these with priority.
>>
> In I run  "watch gluster volume heal gluster-rhev info" I get a
> constantly changing output similar to below, except the numbers and the
> files are changing. I believe this is normal, as it is what I have seen
> even when everything was running normally (before the problem started).
> This is also why the nagios check uses "gluster volume heal gluster-rhev
> info heal-failed". If that command is removed and not replaced with
> something else it removes any possibility of monitoring heal failures.

That generally is a good news. But we can still try to make sure that 
all the heals are complete.
Most of the self-heal failures are intermittent, and subsequent attempts 
of healing will be successful.
We found the only thing 'gluster volume heal <volname> info heal-failed'
command achieved is un-necessary panic to the users. That is the main 
reason we deprecated it.

The main things we need is to know are files which need to be healed and 
files which are in split-brain. For the rest
of the things we generally need more info in debugging, so logs are 
preferable. That is going to be the monitoring
story going forward. We still need to improve on 'heal full' monitoring 
story though. I hope things will progressively
improve.

Pranith.
>
> Brick jupiter.om.net:/gluster_brick_1
> Number of entries: 11
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/c9de61dc-286a-456a-bc3b-e2755ca5c8b3/ac3f2166-61af-4fc0-99c4-a76e9b63000e
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/0483fad0-2dfc-4dbe-98d4-62dbdbe120f3/1d3812af-caa4-4d99-a598-04dfd78eb6cb
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/bc3b165b-619a-4afa-9d5c-5ea599a99c61/2203cc21-db54-4f69-bbf1-4884a86c05d0
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/dd344276-04ef-48d1-9953-02bee5cc3b87/786b1a84-bc9c-48c7-859b-844a383e47ec
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/3d37825c-c798-421b-96ff-ce07128ee3ad/5119ad56-f0c9-4b3f-8f84-71e5f4b6b693
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/ca843e93-447e-4155-83fc-e0d7586b4b50/215e0914-4def-4230-9f2a-a9ece61f2038
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/51927b5f-2a3c-4c04-a90b-4500be0a526c/d14a842e-5fd9-4f6f-b08e-f5895b8b72fd
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/f06bcb57-4a0a-446d-b71d-773595bb0e2f/4dc55bae-5881-4a04-9815-18cdeb8bcfc8
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/cc11aab2-530e-4ffa-84ee-2989d39efeb8/49b2ff17-096b-45cf-a973-3d1466e16066
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/903c3ef4-feaa-4262-9654-69ef118a43ce/8c6732d3-4ce8-422e-a74e-48151e7f7102
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/66dcc584-36ce-43e6-8ce4-538fc6ff03d1/44192148-0708-4bd3-b8da-30baa85b89bf
>
> Brick nix.om.net:/gluster_brick_1
> Number of entries: 11
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/29b3b7cf-7b21-44e7-bede-b86e12d2b69a/7fbce4ad-185b-42d8-a093-168560a3df89
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/903c3ef4-feaa-4262-9654-69ef118a43ce/8c6732d3-4ce8-422e-a74e-48151e7f7102
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/bc3b165b-619a-4afa-9d5c-5ea599a99c61/2203cc21-db54-4f69-bbf1-4884a86c05d0
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/c9de61dc-286a-456a-bc3b-e2755ca5c8b3/ac3f2166-61af-4fc0-99c4-a76e9b63000e
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/3d37825c-c798-421b-96ff-ce07128ee3ad/5119ad56-f0c9-4b3f-8f84-71e5f4b6b693
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/66dcc584-36ce-43e6-8ce4-538fc6ff03d1/44192148-0708-4bd3-b8da-30baa85b89bf
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/0483fad0-2dfc-4dbe-98d4-62dbdbe120f3/1d3812af-caa4-4d99-a598-04dfd78eb6cb
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/dd344276-04ef-48d1-9953-02bee5cc3b87/786b1a84-bc9c-48c7-859b-844a383e47ec
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/ca843e93-447e-4155-83fc-e0d7586b4b50/215e0914-4def-4230-9f2a-a9ece61f2038
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/51927b5f-2a3c-4c04-a90b-4500be0a526c/d14a842e-5fd9-4f6f-b08e-f5895b8b72fd
> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/f06bcb57-4a0a-446d-b71d-773595bb0e2f/4dc55bae-5881-4a04-9815-18cdeb8bcfc8
>
>
>> Do you think it is possible for you to come to #gluster IRC on freenode?
> I'll see what I can do. I've never used IRC before and first need to
> find out how. :)
>
>> Pranith
>>
>>>> This is probably a stupid question but let me ask it anyway. When a
>>>> brick contents are erased from backend
>>>> we need to make sure about the following two things:
>>>> 1) Extended attributes of the root brick is showing pending operations
>>>> on the brick that is erased
>>>> 2) Execute "gluster volume heal <volname> full"
>>> 1) While gluster was stopped I merely did an rm -rf on both the data
>>> sub-directory and the .gluster sub-directory. How do I show that there
>>> are pending operations?
>>> 2) Yes, I did run that.
>>>
>>>> Did you do the steps above?
>>>>
>>>> Since you are on 3.4.2 I think best way to check what files are healed
>>>> is using extended attributes in the backend. Could you please post
>>>> them again.
>>> I don't quite understand what you're asking for. I understand attributes
>>> as belonging to files and directories, not operations. Please elaborate.
>>>
>>>> Pranith
>>>>
>>>> On 06/30/2014 07:12 AM, Pranith Kumar Karampuri wrote:
>>>>> On 06/30/2014 04:03 AM, John Gardeniers wrote:
>>>>>> Hi All,
>>>>>>
>>>>>> We have 2 servers, each with on 5TB brick, configured as replica 2.
>>>>>> After a series of events that caused the 2 bricks to become way
>>>>>> out of
>>>>>> step gluster was turned off on one server and its brick was wiped of
>>>>>> everything but the attributes were untouched.
>>>>>>
>>>>>> This weekend we stopped the client and gluster and made a backup
>>>>>> of the
>>>>>> remaining brick, just to play safe. Gluster was then turned back on,
>>>>>> first on the "master" and then on the "slave". Self-heal kicked in
>>>>>> and
>>>>>> started rebuilding the second brick. However, after 2 full days all
>>>>>> files in the volume are still showing heal failed errors.
>>>>>>
>>>>>> The rebuild was, in my opinion at least, very slow, taking most of a
>>>>>> day
>>>>>> even though the system is on a 10Gb LAN. The data is a little under
>>>>>> 1.4TB committed, 2TB allocated.
>>>>> How much more to be healed? 0.6TB?
>>>>>> Once the 2 bricks were very close to having the same amount of space
>>>>>> used things slowed right down. For the last day both bricks show a
>>>>>> very
>>>>>> slow increase in used space, even though there are no changes being
>>>>>> written by the client. By slow I mean just a few KB per minute.
>>>>> Is the I/O still in progress on the mount? Self-heal doesn't happen
>>>>> on files where I/O is going on mounts in 3.4.x. So that could be the
>>>>> reason if I/O is going on.
>>>>>> The logs are confusing, to say the least. In
>>>>>> etc-glusterfs-glusterd.vol.log on both servers there are thousands of
>>>>>> entries such as (possibly because I was using watch to monitor
>>>>>> self-heal
>>>>>> progress):
>>>>>>
>>>>>> [2014-06-29 21:41:11.289742] I
>>>>>> [glusterd-volume-ops.c:478:__glusterd_handle_cli_heal_volume]
>>>>>> 0-management: Received heal vol req for volume gluster-rhev
>>>>> What versoin of gluster are you using?
>>>>>> That timestamp is the latest on either server, that's about 9
>>>>>> hours ago
>>>>>> as I type this. I find that a bit disconcerting. I have requested
>>>>>> volume
>>>>>> heal-failed info since then.
>>>>>>
>>>>>> The brick log on the "master" server (the one from which we are
>>>>>> rebuilding the new brick) contains no entries since before the
>>>>>> rebuild
>>>>>> started.
>>>>>>
>>>>>> On the "slave" server the brick log shows a lot of entries such as:
>>>>>>
>>>>>> [2014-06-28 08:49:47.887353] E [marker.c:2140:marker_removexattr_cbk]
>>>>>> 0-gluster-rhev-marker: Numerical result out of range occurred while
>>>>>> creating symlinks
>>>>>> [2014-06-28 08:49:47.887382] I
>>>>>> [server-rpc-fops.c:745:server_removexattr_cbk] 0-gluster-rhev-server:
>>>>>> 10311315: REMOVEXATTR
>>>>>> /44d30b24-1ed7-48a0-b905-818dc0a006a2/images/02d4bd3c-b057-4f04-ada5-838f83d0b761/d962466d-1894-4716-b5d0-3a10979145ec
>>>>>>
>>>>>>
>>>>>> (1c1f53ac-afe2-420d-8c93-b1eb53ffe8b1) of key  ==> (Numerical result
>>>>>> out
>>>>>> of range)
>>>>> CC Raghavendra who knows about marker translator.
>>>>>> Those entries are around the time the rebuild was starting. The final
>>>>>> entries in that same log (immediately after those listed above) are:
>>>>>>
>>>>>> [2014-06-29 12:47:28.473999] I
>>>>>> [server-rpc-fops.c:243:server_inodelk_cbk] 0-gluster-rhev-server:
>>>>>> 2869:
>>>>>> INODELK (null) (c67e9bbe-5956-4c61-b650-2cd5df4c4df0) ==> (No such
>>>>>> file
>>>>>> or directory)
>>>>>> [2014-06-29 12:47:28.489527] I
>>>>>> [server-rpc-fops.c:1572:server_open_cbk]
>>>>>> 0-gluster-rhev-server: 2870: OPEN (null)
>>>>>> (c67e9bbe-5956-4c61-b650-2cd5df4c4df0) ==> (No such file or
>>>>>> directory)
>>>>> These logs are harmless and were fixed in 3.5 I think. Are you on
>>>>> 3.4.x?
>>>>>
>>>>>> As I type it's 2014-06-30 08:31.
>>>>>>
>>>>>> What do they mean and how can I rectify it?
>>>>>>
>>>>>> regards,
>>>>>> John
>>>>>>
>>>>>> _______________________________________________
>>>>>> Gluster-users mailing list
>>>>>> Gluster-users at gluster.org
>>>>>> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>>>>> _______________________________________________
>>>>> Gluster-users mailing list
>>>>> Gluster-users at gluster.org
>>>>> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>>>> ______________________________________________________________________
>>>> This email has been scanned by the Symantec Email Security.cloud
>>>> service.
>>>> For more information please visit http://www.symanteccloud.com
>>>> ______________________________________________________________________
>>
>> ______________________________________________________________________
>> This email has been scanned by the Symantec Email Security.cloud service.
>> For more information please visit http://www.symanteccloud.com
>> ______________________________________________________________________

More information about the Gluster-users mailing list