[Gluster-users] gluster-fuse and rebalance (Re: (3.1.X) add-brick during re-balancing)

[Shishir Gowda]

Hi Tomo,

That is correct. The gluster volume rebalance is no more dependent on gluster-fuse package.

With regards,
Shishir

----- Original Message -----
From: "Tomoaki Sato" <tsato at valinux.co.jp>
To: "Amar Tumballi" <amar at gluster.com>
Cc: gluster-users at gluster.org
Sent: Wednesday, June 27, 2012 1:36:44 PM
Subject: [Gluster-users] gluster-fuse and rebalance (Re: (3.1.X) add-brick during re-balancing)

Amar,

Let me confirm that gluster-fuse package is not required in NFS-server-use of GlusterFS-3.3.0 as 'glaster volume rebalance' dose not use FUSE.

Regards,

Tomo

(2011/08/29 15:09), Amar Tumballi wrote:
>
>     1. fuse module is required to 'glaster volume rebalance'.
>
>     2. 'gluster volume rebalance start' and 'gluster volume rebalance stop' must be issued in exactly same node.
>
>     By the way, why multiple re-balancing on a volume can be exist in a cluster ?
>
>
> Enhancement to make sure 'rebalance' operation co-operate with other peers is in progress, and will be available in 3.3.0 release. For now, yes, there is a possibility that single volume can have multiple rebalance operations going on (on different machines). Even though it should not break any thing, it will degrade the performance. For now, preventing this should be taken care by admin.
>
> Regards,
> Amar


_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users