[Gluster-users] performance lower then expected

[Anand Avati]

Are you using write-behind? Can you post your volume spec files?

avati

2008/10/24, Michael Di Domenico <mdidomenico4 at gmail.com>:
>
> I've setup an eight node server stripe using gluster 1.4.0pre5 using the
> stripe example from the wiki.  Each of these eight nodes has a 100Mbit
> ethernet card and a single hard disk.
> I've connected them all together using a gigabit switch and I have a
> gigabit workstation connected, with gluster mounted and running fine.
>
> However, when i try to do a dd test to the disk "dd if=/dev/zero of=test1
> bs=1024k count=1000", I'm only seeing 10MB/sec over the transfer.
>
> I would suspect the data to stripe evenly across all the disks/nodes,
> effectively giving me at least over 50MB/sec in combined throughput.
>
> I'm I confused on what the stripe translator does, or did I do something
> wrong?
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
>
>


-- 
If I traveled to the end of the rainbow
As Dame Fortune did intend,
Murphy would be there to tell me
The pot's at the other end.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20081025/99a10ba4/attachment.html>