[Gluster-users] Fwd: NUFA sample volume file to the following configuration
stas.oskin at gmail.com
Mon Dec 29 10:25:46 UTC 2008
Can you advice regarding the below?
2008/12/28 Stas Oskin <stas.oskin at gmail.com>
> Thanks for the link, but I already seen it.
> What I need to know, is how to include in volume the separate disk drives
> that I have on the server.
> Also, how to set an AFR there.
> 2008/12/28 Basavanagowda Kanur <gowda at zresearch.com>
>> http://gluster.org/docs/index.php/NUFA_with_single_process will help you
>> setup NUFA.
>> On Sun, Dec 28, 2008 at 4:44 AM, Stas Oskin <stas.oskin at gmail.com> wrote:
>>> I'm looking to run GlusterFS in NUFA approach for 2 servers in following
>>> /dev/md2 4.8G 1.1G 3.5G 25% /
>>> /dev/sda5 357G 195M 339G 1% /disk1
>>> /dev/sdb5 357G 195M 339G 1% /disk2
>>> /dev/sdc3 357G 195M 339G 1% /disk3
>>> /dev/sdd3 357G 195M 339G 1% /disk4
>>> /dev/md0 190M 12M 169M 7% /boot
>>> Where the data would be located on sda/b/c/d disks.
>>> I studied the volume file syntax, but couldn't understand how to create a
>>> file to unify all these disks into one volume.
>>> If someone could post a sample file, which does a NUFA setup for 2
>>> servers with such disks topology + AFR between them, so I could get started
>>> with it, I'd much appreciate it.
>>> Thanks in advance.
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org
>> hard work often pays off after time, but laziness always pays off now
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Gluster-users