[Gluster-users] help, glusterfs test caused very high tcp segment retransmission rate

[Collin Douglas]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

This sounds a lot like a physical layer issue -- most notably a 
speed/duplex issue.  Any time I've seen a large number of retransmits 
occur during heavy load, this is what I suspect.

That said, I don't know what type of interconnect you're using.  Tell us 
more about your configuration.

- -Collin

Dai, Manhong wrote:
>
>
> Hi,
>
>  
>    I found the aggregated IO speed is only about 100MB/s on 4 Giga-bit 
> Brick. This test is done over 12 computing nodes with command dd 
> if=/dev/zero of=bar bs=1048576 count=20480. Because our brick has very 
> fast local IO speed, the problem could be network.
>
>
>   Then I found computing nodes got too many retransmited segments 
> during test according to netstat -st. The retransmission ratio is 
> about 5%, but brick node has a normally low transmission rate.
>
>
>   Could some shed some light?
>
> Best,
> Manhong
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
>   

-----BEGIN PGP SIGNATURE-----
Version: PGP Universal 2.6.3
Charset: ISO-8859-1

wsBVAwUBSLK2gfvgUY49IQeAAQjErwf/ZWFWZTjWUCNpTWdU94VgxmcEaD4zT3P2
I6KyfYL68Mwwdr/8leQoJbghpWupapMxSUa8KB8HA9V/56cZFye4irf97Z9b+TT1
5/hF1iqhfK2tnEADOB9G8fSY8ptzbSfV9yDbuNTWl+Tz8mzErDYf6UsxGn3bZOv5
xb/7rvOkGq5rhG0WLUQYGUEuU1QptUfu6vvohfVciGaEdbL1SHYy+rSDxSrexFS4
mRgT/sBxainKy0mSwq5D8cYt8flbsFATZ582vnRBj6UfzWoZEyEpCjKoLqJEWuWn
rpa8HhEhc5vm2GnQXIE9iXO9vCLMi4Y76sJpDtR/3hnu6mlrQEq4NA==
=0EPQ
-----END PGP SIGNATURE-----