[Gluster-users] Need help for production setup

[Punit Dambiwal]

Hi Taira,

Thanks for the updates...I want to use gluster with Ovirt...would you mind
to more elaborate this (- If you use only gluster ative protocol then you
don't need to configure HA with keepalived.)

Thanks,
Punit


On Mon, Aug 18, 2014 at 1:00 PM, TAIRA Hajime <htaira at pantora.net> wrote:

> Hi, Punit
>
> Best practices are:
> - Use RAID6 or RAID1+0 array for brick
> - Choose Replicated-Distributed volume type
> - If you use only gluster ative protocol then you don't need to configure
> HA with keepalived.
>
> Please refer following pages.
> https://access.redhat.com/articles/66206
>
> Best regards,
> Taira
>
>
> 2014-08-15 16:39 GMT+09:00 Punit Dambiwal <hypunit at gmail.com>:
>
>> Hi,
>>
>> I want to use gluster distributed replicate storage with 4 nodes with the
>> below configuration :-
>>
>>
>>    - 4 x *Quanta STRATOS S210-X22RQ*
>>    - 4 x 12 x 512 GB , 2.5″ SSD (front, hot swappable main storage)
>>    - 4 x 2 x 128 GB, 2’5″ SSD (*rear, hot swappable* os drives, awesome
>>    feature!)
>>    - 2 x quality stacked switches (with one leg of each bond device out
>>    to each switch)
>>    - IPMI: For Fencing Ovirt.
>>
>> I want to use this setup in ovirt...I seek your help to best utilize the
>> storage with redundancy(even one node failure or any HDD failure) ??
>>
>> Do i need to use the HW RAID also...it seems the gluster replication can
>> do the same...any advise ??
>>
>> Also i want it to be high available...if any node goes down the data can
>> be accessible...please refer any good document for HA with keepalived or
>> others ??
>>
>> Thanks,
>>  Punit
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20140818/22f8866a/attachment.html>