[Gluster-devel] About gluster on 32 bits
William Oquendo
woquendo at gmail.com
Mon Jan 28 21:13:10 UTC 2008
Hi again,
I managed to resolve the problem with UTS_RELEASE.
But, I have another error, more difficult for me. It is the following:
...
file: could not find any magic files!
file: could not find any magic files!
file: could not find any magic files!
file: could not find any magic files!
file: could not find any magic files!
file: could not find any magic files!
file: could not find any magic files!
file: could not find any magic files!
file: could not find any magic files!
file: could not find any magic files!
file: could not find any magic files!
rm -rf ./ramdisk.slave.i686
cp -af /home/oquendo/GLUSTER/gluster--mainline--1.1/destdir_ramdisk_i686
./ramdisk.slave.i686
cd /home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk/skel-slave && \
(find . | grep -Ev 'CVS|~|.arch-ids' | \
cpio -puvd /home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686)
/home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk.slave.i686/./bin
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./bin/main_shell
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./bin/vt_loop_sh
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./bin/slave_shell
/home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk.slave.i686/./dev
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./dev/MAKEDEV
/home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk.slave.i686/./etc
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/nsswitch.conf
/home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk.slave.i686/./etc/rc.d
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/rc.d/rc.reboot
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/rc.d/rc.modules
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/rc.d/rc.sysinit
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/rc.d/rc.slave
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/rc.d/rc.halt
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/rc.d/rc.sshd
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/dialogrc
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/HOSTNAME
/home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk.slave.i686/./etc/fstab
/home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk.slave.i686/./etc/group
/home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk.slave.i686/./etc/hosts
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/termcap
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/initscript
/home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk.slave.i686/./etc/passwd
/home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk.slave.i686/./etc/stage2
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/stage2/config_network.sh
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/services
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/dhclient-script
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/inittab
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/inputrc
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/protocols
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/resolv.conf
/home/oquendo/GLUSTER/gluster--mainline--1.1
/ramdisk.slave.i686/./etc/profile
328 blocks
genext2fs -b 65536 -e 0 -D
/home/oquendo/GLUSTER/gluster--mainline--1.1/ramdisk/devices.txt
\
-d ./ramdisk.slave.i686 \
./initrd.slave.i686.img
genext2fs: couldn't allocate a block (no free space)
make[1]: *** [initrd.slave] Error 1
make[1]: Leaving directory `/home/oquendo/GLUSTER/gluster--mainline--1.1'
make: *** [all] Error 2
The hard disk has enough space, and I tried the command as root and as a
normal user.
Please, could you give your advice?
Thanks in advance.
William Oquendo
On Jan 28, 2008 2:58 PM, William Oquendo <woquendo at gmail.com> wrote:
> Hi,
>
> I was playing with building an iso image of gluster for 32 bits systems,
> following the instructions you gave me. But, unfortunately, the following
> error always appears when I type make:
>
> Making all in getkversion
> make[4]: Entering directory `/home/oquendo/GLUSTER/gluster--mainline--1.1
> /build_live_i686/nfs-utils-1.0.8-rc4/tools/getkversion'
> if cc -DHAVE_CONFIG_H -I. -I. -I../../support/include -D_GNU_SOURCE
> -I/home/oquendo/GLUSTER/gluster--mainline--1.1/destdir_live_i686/usr/include
> -D_GNU_SOURCE -g -O2 -MT getkversion-getkversion.o -MD -MP -MF
> ".deps/getkversion-getkversion.Tpo" -c -o getkversion-getkversion.o `test
> -f 'getkversion.c' || echo './'`getkversion.c; \
> then mv -f ".deps/getkversion-getkversion.Tpo" ".deps/getkversion-
> getkversion.Po"; else rm -f ".deps/getkversion-getkversion.Tpo"; exit 1;
> fi
> getkversion.c: In function 'main':
> getkversion.c:17: error: 'UTS_RELEASE' undeclared (first use in this
> function)
> getkversion.c:17: error: (Each undeclared identifier is reported only once
> getkversion.c:17: error: for each function it appears in.)
> make[4]: *** [getkversion-getkversion.o] Error 1
> make[4]: Leaving directory `/home/oquendo/GLUSTER/gluster--mainline--1.1
> /build_live_i686/nfs-utils-1.0.8-rc4/tools/getkversion'
> make[3]: *** [all-recursive] Error 1
> make[3]: Leaving directory `/home/oquendo/GLUSTER/gluster--mainline--1.1
> /build_live_i686/nfs-utils-1.0.8-rc4/tools'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory `/home/oquendo/GLUSTER/gluster--mainline--1.1
> /build_live_i686/nfs-utils-1.0.8-rc4'
> make[1]: *** [nfs-utils.live] Error 2
> make[1]: Leaving directory `/home/oquendo/GLUSTER/gluster--mainline--1.1'
> make: *** [all] Error 2
>
> I tried to set the UTS_RELEASE variable by hand, but it did not work.
> Could you, please, give some advice?
>
> Thanks a lot.
>
> William Oquendo
>
> PD: I am using a linux-2.6.23.9 kernel to build gluster iso.
>
>
>
> On Sep 20, 2007 2:15 AM, Bala.A <balamurugan at gmx.co.uk> wrote:
>
> >
> > Hi,
> >
> > >
> > > I am looking for gluster on 32 bits architecture, but on the downloads
> > > links
> > > at http://ftp.zresearch.com/pub/gluster/release/current/ there is only
> > > x86_64 versions. Where can I find 32 bits versions of gluster? Is it
> > > enough with the iso image, or do I have to work with the toolchain
> > files?
> > >
> >
> > We haven't prepared 32 bit version ISO of GlusterHPC yet and the source
> > is
> > very much compatible with 32bit as well as x86-64 bit architecture.
> > Toolchain is only required to compile GlusterHPC to get ISO file and
> > relevant toolchain should be used for compilation.
> >
> > For i386 architecture, here are the steps to be followed to compile
> > GlusterHPC.
> >
> > $ wget
> >
> > http://ftp.zresearch.com/pub/gluster/release/old/toolchain/gluster-toolchain-v2-on32.tar.bz2
> >
> > $ tar -C /usr/local -xjf gluster-toolchain-v2-on32.tar.bz2
> >
> > $ export $PATH=$PATH:/usr/local/gluster-toolchain-on32-32-64/bin
> >
> > $ mkdir tarballs
> >
> > $ wget -Ptarballs -nH http://ftp.zresearch.com/pub/gluster/external/*
> >
> > $ wget
> >
> > http://ftp.zresearch.com/pub/gluster/release/current/gluster--mainline--1.1.tar.gz
> >
> > $ export TARBALLSDIR=$(pwd)/tarballs
> >
> > $ cd gluster--mainline--1.1
> >
> > $ ./autogen.sh
> >
> > $ ./configure --with-tarballs-dir=$TARBALLSDIR
> >
> > $ make
> >
> > $ ls -l gluster-1.3-i386.iso
> >
> >
> > Thanks,
> >
> > Regards,
> > Bala
> > ---
> > Free as in freedom
> > http://www.gnu.org/
> >
> >
> >
>
>
> --
> William Oquendo
> Physicist, National University of Colombia
> Master in Physics student
> Simulation Of Physical Systems Group
> Linux User # 321481
> *********************
> Este correo puede carecer de tildes o eñes ya que el teclado no contiene
> estos caracteres. Presento excusas por eso.
>
> *********************
>
> Young's Handy Guide to the Modern Sciences:
> If it is green or it wiggles -- it is Biology.
> If it stinks -- it is Chemistry.
> If it doesn't work -- it is Physics.
>
> Finagle's Third Law:
> In any collection of data, the figure most obviously correct,
> beyond all need of checking, is the mistake.
>
> Corollaries:
> 1. Nobody whom you ask for help will see it.
> 2. The first person who stops by, whose advice you really
> don't want to hear, will see it immediately.
> *********************
>
--
William Oquendo
Physicist, National University of Colombia
Master in Physics student
Simulation Of Physical Systems Group
Linux User # 321481
*********************
Este correo puede carecer de tildes o eñes ya que el teclado no contiene
estos caracteres. Presento excusas por eso.
*********************
Young's Handy Guide to the Modern Sciences:
If it is green or it wiggles -- it is Biology.
If it stinks -- it is Chemistry.
If it doesn't work -- it is Physics.
Finagle's Third Law:
In any collection of data, the figure most obviously correct,
beyond all need of checking, is the mistake.
Corollaries:
1. Nobody whom you ask for help will see it.
2. The first person who stops by, whose advice you really
don't want to hear, will see it immediately.
*********************
More information about the Gluster-devel
mailing list