[Gluster-Maintainers] Build failed in Jenkins: netbsd-periodic #491
jenkins at build.gluster.org
jenkins at build.gluster.org
Fri Dec 15 14:06:15 UTC 2017
See <https://build.gluster.org/job/netbsd-periodic/491/display/redirect?page=changes>
Changes:
[Amar Tumballi] dht: Fill first_up_subvol before use in dht_opendir
------------------------------------------
[...truncated 239.83 KB...]
================================================================================
[13:57:00] Running tests in file ./tests/basic/afr/arbiter-add-brick.t
./tests/basic/afr/arbiter-add-brick.t ..
1..40
ok 1, LINENUM:6
ok 2, LINENUM:7
ok 3, LINENUM:10
ok 4, LINENUM:11
ok 5, LINENUM:12
ok 6, LINENUM:13
ok 7, LINENUM:14
ok 8, LINENUM:15
ok 9, LINENUM:16
ok 10, LINENUM:19
ok 11, LINENUM:20
ok 12, LINENUM:21
ok 13, LINENUM:25
ok 14, LINENUM:26
ok 15, LINENUM:29
ok 16, LINENUM:30
ok 17, LINENUM:32
ok 18, LINENUM:33
ok 19, LINENUM:36
ok 20, LINENUM:37
ok 21, LINENUM:38
ok 22, LINENUM:39
ok 23, LINENUM:40
ok 24, LINENUM:41
ok 25, LINENUM:42
ok 26, LINENUM:45
ok 27, LINENUM:46
ok 28, LINENUM:47
ok 29, LINENUM:48
ok 30, LINENUM:49
ok 31, LINENUM:52
ok 32, LINENUM:53
ok 33, LINENUM:56
ok 34, LINENUM:57
ok 35, LINENUM:60
ok 36, LINENUM:61
ok 37, LINENUM:64
ok 38, LINENUM:65
ok 39, LINENUM:68
ok 40, LINENUM:69
ok
All tests successful.
Files=1, Tests=40, 50 wallclock secs ( 0.04 usr 0.01 sys + 19818515.71 cusr 15314308.38 csys = 35132824.14 CPU)
Result: PASS
End of test ./tests/basic/afr/arbiter-add-brick.t
================================================================================
================================================================================
[13:57:50] Running tests in file ./tests/basic/afr/arbiter-cli.t
./tests/basic/afr/arbiter-cli.t ..
1..7
ok 1, LINENUM:10
ok 2, LINENUM:11
ok 3, LINENUM:14
ok 4, LINENUM:17
ok 5, LINENUM:20
ok 6, LINENUM:21
ok 7, LINENUM:24
ok
All tests successful.
Files=1, Tests=7, 4 wallclock secs ( 0.02 usr 0.02 sys + 0.82 cusr 1.27 csys = 2.13 CPU)
Result: PASS
End of test ./tests/basic/afr/arbiter-cli.t
================================================================================
================================================================================
[13:57:54] Running tests in file ./tests/basic/afr/arbiter-mount.t
rm: /mnt/glusterfs/0/xy_zzy: Socket is not connected
mount_nfs: can't access /patchy: Unknown error: 10006
./tests/basic/afr/arbiter-mount.t ..
1..22
ok 1, LINENUM:11
ok 2, LINENUM:12
ok 3, LINENUM:14
ok 4, LINENUM:15
ok 5, LINENUM:16
ok 6, LINENUM:17
ok 7, LINENUM:18
ok 8, LINENUM:20
ok 9, LINENUM:21
ok 10, LINENUM:25
ok 11, LINENUM:26
ok 12, LINENUM:27
ok 13, LINENUM:30
ok 14, LINENUM:32
ok 15, LINENUM:33
ok 16, LINENUM:34
ok 17, LINENUM:35
ok 18, LINENUM:37
ok 19, LINENUM:38
ok 20, LINENUM:39
ok 21, LINENUM:42
ok 22, LINENUM:43
ok
All tests successful.
Files=1, Tests=22, 37 wallclock secs ( 0.03 usr 0.03 sys + 1.17 cusr 1.80 csys = 3.03 CPU)
Result: PASS
End of test ./tests/basic/afr/arbiter-mount.t
================================================================================
================================================================================
[13:58:31] Running tests in file ./tests/basic/afr/arbiter-remove-brick.t
dd: /mnt/glusterfs/0/file: Input/output error
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
umount: /mnt/glusterfs/0: Invalid argument
./tests/basic/afr/arbiter-remove-brick.t ..
1..18
ok 1, LINENUM:6
ok 2, LINENUM:7
ok 3, LINENUM:10
ok 4, LINENUM:11
ok 5, LINENUM:12
ok 6, LINENUM:13
ok 7, LINENUM:14
ok 8, LINENUM:17
ok 9, LINENUM:18
ok 10, LINENUM:21
ok 11, LINENUM:22
ok 12, LINENUM:24
not ok 13 , LINENUM:25
FAILED COMMAND: dd if=/dev/urandom of=/mnt/glusterfs/0/file bs=1024 count=1024
ok 14, LINENUM:26
not ok 15 Got "" instead of "1048576", LINENUM:29
FAILED COMMAND: 1048576 stat -c %s /mnt/glusterfs/0/file
not ok 16 Got "568320" instead of "1048576", LINENUM:32
FAILED COMMAND: 1048576 stat -c %s /d/backends/patchy0/file
not ok 17 Got "568320" instead of "1048576", LINENUM:33
FAILED COMMAND: 1048576 stat -c %s /d/backends/patchy1/file
ok 18, LINENUM:35
Failed 4/18 subtests
Test Summary Report
-------------------
./tests/basic/afr/arbiter-remove-brick.t (Wstat: 0 Tests: 18 Failed: 4)
Failed tests: 13, 15-17
Files=1, Tests=18, 19 wallclock secs ( 0.03 usr 0.02 sys + 1.23 cusr 1.62 csys = 2.90 CPU)
Result: FAIL
./tests/basic/afr/arbiter-remove-brick.t: bad status 1
*********************************
* REGRESSION FAILED *
* Retrying failed tests in case *
* we got some spurious failures *
*********************************
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
stat: /mnt/glusterfs/0/file: lstat: No such file or directory
umount: /mnt/glusterfs/0: Invalid argument
./tests/basic/afr/arbiter-remove-brick.t ..
1..18
ok 1, LINENUM:6
ok 2, LINENUM:7
ok 3, LINENUM:10
ok 4, LINENUM:11
ok 5, LINENUM:12
ok 6, LINENUM:13
ok 7, LINENUM:14
ok 8, LINENUM:17
ok 9, LINENUM:18
ok 10, LINENUM:21
ok 11, LINENUM:22
ok 12, LINENUM:24
ok 13, LINENUM:25
ok 14, LINENUM:26
not ok 15 Got "" instead of "1048576", LINENUM:29
FAILED COMMAND: 1048576 stat -c %s /mnt/glusterfs/0/file
ok 16, LINENUM:32
ok 17, LINENUM:33
ok 18, LINENUM:35
Failed 1/18 subtests
Test Summary Report
-------------------
./tests/basic/afr/arbiter-remove-brick.t (Wstat: 0 Tests: 18 Failed: 1)
Failed test: 15
Files=1, Tests=18, 27 wallclock secs ( 0.04 usr 0.00 sys + 1.22 cusr 1.80 csys = 3.06 CPU)
Result: FAIL
./tests/basic/afr/arbiter-remove-brick.t: 2 new core files
End of test ./tests/basic/afr/arbiter-remove-brick.t
================================================================================
Run complete
================================================================================
Number of tests found: 6
Number of tests selected for run based on pattern: 6
Number of tests skipped as they were marked bad: 0
Number of tests skipped because of known_issues: 0
Number of tests that were run: 6
Tests ordered by time taken, slowest to fastest:
================================================================================
./tests/basic/afr/arbiter-add-brick.t - 50 second
./tests/basic/afr/arbiter-mount.t - 37 second
./tests/basic/afr/add-brick-self-heal.t - 20 second
./tests/basic/afr/arbiter-remove-brick.t - 19 second
./tests/basic/afr/arbiter-cli.t - 4 second
./tests/basic/0symbol-check.t - 0 second
1 test(s) failed
./tests/basic/afr/arbiter-remove-brick.t
1 test(s) generated core
./tests/basic/afr/arbiter-remove-brick.t
Result is 1
tar: Removing leading / from absolute path names in the archive
Cores and build archived in http://nbslave72.cloud.gluster.org/archives/archived_builds/build-install-20171215135638.tgz
Open core using the following command to get a proper stack...
Example: From root of extracted tarball
gdb -ex 'set sysroot ./' -ex 'core-file ./build/install/cores/xxx.core' <target, say ./build/install/sbin/glusterd>
NB: this requires a gdb built with 'NetBSD ELF' osabi support, which is available natively on a NetBSD-7.0/i386 system
tar: Removing leading / from absolute path names in the archive
Logs archived in http://nbslave72.cloud.gluster.org/archives/logs/glusterfs-logs-20171215135638.tgz
error: fatal: change is closed
fatal: one or more reviews failed; review output above
Build step 'Execute shell' marked build as failure
More information about the maintainers
mailing list