[Gluster-users] __Geo-replication status is getting Faulty after few seconds
Aravinda
aravinda at kadalu.tech
Tue Feb 6 13:43:59 UTC 2024
Geo-rep delete and create will recreate the session and continue syncing from where it stopped last time. Last sync time is remembered in the xattrs of Brick root of Primary volume (`trusted.glusterfs.<primary-volume-id>.<secondary-volume-id>.stime`).
If reset-sync-time option used with delete, then it will remove the above mentioned xattr. When Geo-rep session is created again, it will start a new session.
New session starts with Hybrid crawl then switches to History crawl and then switches to Changelog crawl. History crawl does file system crawl and all the files will be identified as to be synced. Geo-rep uses rsync to sync the files (Change detection is done externally and rsync only gets the list of files to be synced), rsync will only sync the difference if any.
Only issue I see of using this option is it may take lot of time to reach the current time and start syncing the recent files.
> I tried to remove the secret.pem.pub from master1 and create it again. Then, I ran
georep create push pem, which copied the missing entry to the drtier1data (slave) node. However, I am still getting the same error. I have also checked the logs on drtier1data (slave) node and found the following logs.
Please share the errors you see from Primary geo-rep logs.
--
Thanks and Regards
Aravinda
Kadalu Technologies
---- On Tue, 06 Feb 2024 18:50:37 +0530 Anant Saraswat <anant.saraswat at techblue.co.uk> wrote ---
Hi All,
Does anyone know what will happen if I delete the geo-replication with reset-sync-time
and create it again, Will it copy the whole data again, or will it just check the files and then copy the new remaining files?
Thanks,
Anant
From: Gluster-users <mailto:gluster-users-bounces at gluster.org> on behalf of Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Sent: 04 February 2024 12:44 PM
To: mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
EXTERNAL: Do not click links or open attachments if you do not recognize the sender.
Hello Everyone,
I'm running out of options, I've already tried rebooting
the physical servers without any luck.
Now, I am thinking, should I try to delete the geo-replication
with reset-sync-time? Will that resolve the issue? We have 6TB of data, so will running delete with reset-sync-time copy the whole 6TB of data again, or will it just check the files and then copy the new remaining files?
I have checked the documentation, and it's not clear
what will happen with the files already present on the slave volume. Will they be recopied, or just checked and skipped in case of deleting the session and creating it again?
Anyone have any experience around this situation? Any help is appreciated.
Many thanks,
Anant
From: Gluster-users <mailto:gluster-users-bounces at gluster.org> on behalf of Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Sent: 01 February 2024 6:30 PM
To: Aravinda <mailto:aravinda at kadalu.tech>
Cc: mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
EXTERNAL: Do not click links or open attachments if you do not recognize the sender.
Hi mailto:aravinda at kadalu.tech,
Thanks for opening the gitlab issue.
I tried to remove the secret.pem.pub from master1 and create it again. Then, I ran
georep create push pem, which copied the missing entry to the drtier1data (slave) node. However, I am still getting the same error. I have also checked the logs on drtier1data (slave) node and found the following logs.
==> /var/log/glusterfs/geo-replication-slaves/tier1data_drtier1data_drtier1data/gsyncd.log
<==
[2024-02-01 18:00:02.93139] I [resource(slave master1/opt/tier1data2019/brick):1139:connect]
GLUSTER: Mounted gluster volume [{duration=1.0831}]
[2024-02-01 18:00:02.129343] I [resource(slave master1/opt/tier1data2019/brick):1166:service_loop]
GLUSTER: slave listening
[2024-02-01 18:00:06.603335] I [repce(slave master1/opt/tier1data2019/brick):96:service_loop]
RepceServer: terminating on reaching EOF.
==> /var/log/glusterfs/geo-replication-slaves/tier1data_drtier1data_drtier1data/mnt-master1-opt-tier1data2019-brick.log
<==
[2024-02-01 18:00:06.632144 +0000] I [fuse-bridge.c:6233:fuse_thread_proc] 0-fuse:
initiating unmount of /tmp/gsyncd-aux-mount-j35hwrxj
[2024-02-01 18:00:06.633483 +0000] W [glusterfsd.c:1429:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x817a)
[0x7f3797b7717a] -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xfd) [0x5646034c5bfd] -->/usr/sbin/glusterfs(cleanup_and_exit+0x58) [0x5646034c5a48] ) 0-: received signum (15), shutting down
[2024-02-01 18:00:06.633589 +0000] I [fuse-bridge.c:7063:fini] 0-fuse: Unmounting '/tmp/gsyncd-aux-mount-j35hwrxj'.
[2024-02-01 18:00:06.633622 +0000] I [fuse-bridge.c:7068:fini] 0-fuse: Closing fuse
connection to '/tmp/gsyncd-aux-mount-j35hwrxj'.
Thanks,
Anant
From: Aravinda <mailto:aravinda at kadalu.tech>
Sent: 01 February 2024 8:58 AM
To: Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Cc: mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
EXTERNAL: Do
not click links or open attachments if you do not recognize the sender.
> I think we can enhance Geo-rep to accept configuration option to select a worker as Active manually. I will think about it
and update here if possible.
Opened a Github issue for the same.
https://urldefense.com/v3/__https://github.com/gluster/glusterfs/issues/4304__;!!I_DbfM1H!BhqOtEyWh2TghCsLjQAu6kNSYqtFoRKfU8nSfUnVX4ZZfmlMRVka_BTot4C1XsR1fBFnoBMgNlYUi-xIXH9J5jo8GPwD7Ao$
--
Aravinda
Kadalu Technologies
---- On Thu, 01 Feb 2024 07:43:40 +0530 Aravinda <mailto:aravinda at kadalu.tech> wrote ---
Hi Anant,
> Still same thing happening, One thing I have noticed that everytime master1 is trying to be primary node,
how it's selected that which node will be primary node in the geo-replication?
Gsyncd worker from the first node of the Replica bricks will become Active and participate
in syncing. If the Active worker node goes down then the other worker becomes Active (Not when it is Faulty). Geo-rep can use Gluster meta volume to hold a lock and automatically switch when a Active worker is Faulty (Refer: Meta Volume config https://urldefense.com/v3/__https://docs.gluster.org/en/main/Administrator-Guide/Geo-Replication/*configurable-options__;Iw!!I_DbfM1H!BhqOtEyWh2TghCsLjQAu6kNSYqtFoRKfU8nSfUnVX4ZZfmlMRVka_BTot4C1XsR1fBFnoBMgNlYUi-xIXH9J5jo8MnMAKb4$).
I think we can enhance Geo-rep to accept configuration option to select a worker as Active
manually. I will think about it and update here if possible.
> Second, I have noticed in the ".ssh/authorized_keys" file on the secondry node, master2 and master3 have 2 entries (command="/usr/libexec/glusterfs/gsyncd" AND command="tar ${SSH_ORIGINAL_COMMAND#* }", but
master1 node have only one entry with command="tar ${SSH_ORIGINAL_COMMAND#* }" , This indicates that there is a missing entry for master1 with the command="/usr/libexec/glusterfs/gsyncd",
Does it make any sense?
Missing entry is the problem as you observed. Delete /var/lib/glusterd/geo-replication/secret.pem.pub
file in master1 and then run gsec_create, georep create push pem again.
--
Aravinda
Kadalu Technologies
---- On Thu, 01 Feb 2024 00:27:34 +0530 Anant Saraswat <mailto:anant.saraswat at techblue.co.uk> wrote ---
Hi mailto:aravinda at kadalu.tech,
As advised, I have removed all the master server-related entries from the
".ssh/authorized_keys" file on the secondary node. Then, I ran the "ssh-copy-id root at drtier1data" command on all the masters for passwordless SSH and verified that I can access the drtier1data server from all the master nodes.
After that, I ran the following commands.
gluster system:: execute gsec_create
gluster volume geo-replication tier1data drtier1data::drtier1data
create push-pem force
gluster volume geo-replication tier1data drtier1data::drtier1data
start
gluster volume geo-replication tier1data drtier1data::drtier1data
status
[root at master3 ~]# gluster volume geo-replication
tier1data drtier1data::drtier1data status
MASTER NODE MASTER VOL MASTER
BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
master3 tier1data /opt/tier1data2019/brick
root drtier1data::drtier1data N/A Initializing... N/A N/A
master1 tier1data /opt/tier1data2019/brick
root drtier1data::drtier1data N/A Initializing... N/A N/A
master2 tier1data /opt/tier1data2019/brick
root drtier1data::drtier1data N/A Initializing... N/A N/A
[root at master3 ~]# gluster volume geo-replication
tier1data drtier1data::drtier1data status
MASTER NODE MASTER VOL MASTER
BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
master3 tier1data /opt/tier1data2019/brick
root drtier1data::drtier1data Passive N/A N/A
master1 tier1data /opt/tier1data2019/brick
root drtier1data::drtier1data Active History Crawl N/A
master2 tier1data /opt/tier1data2019/brick
root drtier1data::drtier1data Passive N/A N/A
[root at master3 ~]# gluster volume geo-replication
tier1data drtier1data::drtier1data status
MASTER NODE MASTER VOL MASTER
BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
master3 tier1data /opt/tier1data2019/brick
root drtier1data::drtier1data Passive N/A N/A
master1 tier1data /opt/tier1data2019/brick
root drtier1data::drtier1data N/A Faulty N/A N/A
master2 tier1data /opt/tier1data2019/brick
root drtier1data::drtier1data Passive N/A N/A
Still same thing happening, One thing I have noticed
that everytime master1 is trying to be primary node, how it's selected that which node will be primary node in the geo-replication?
Second, I have noticed in the ".ssh/authorized_keys" file on the secondry node, master2 and master3 have 2 entries (command="/usr/libexec/glusterfs/gsyncd" AND command="tar ${SSH_ORIGINAL_COMMAND#* }", but
master1 node have only one entry with command="tar ${SSH_ORIGINAL_COMMAND#* }" , This indicates that there is a missing entry for master1 with the command="/usr/libexec/glusterfs/gsyncd",
Does it make any sense?
Really appreciate
your help on this.
Thanks,
Anant
From: Aravinda <mailto:aravinda at kadalu.tech>
Sent: 31 January 2024 5:27 PM
To: Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Cc: mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>;
Strahil Nikolov <mailto:hunter86_bg at yahoo.com>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
EXTERNAL: Do not click links or open attachments if you do not recognize
the sender.
In one of the thread, I saw the SSH public key is manually copied to secondary node's authorized_keys
file. Check if that entry starts with "command=" or not. If not added, delete the entry in that file (or delete all Georep related entries in that file) and run Georep create push-pem force again.
--
Aravinda
Kadalu Technologies
---- On Wed, 31 Jan 2024 17:19:45 +0530 Anant Saraswat <mailto:anant.saraswat at techblue.co.uk> wrote
---
Hi mailto:aravinda at kadalu.tech,
I used the exact same commands when I added master3 to the primary geo-replication.
However, the issue is that the master3 node is in a passive state, and master1 is stuck in a loop of Initializing -> Active -> Faulty. It never considers master2 or master3 as the primary master for geo-replication.
If master1 can connect to the secondary (drtier1data) server, and I see
the following message in the master1 logs which says "SSH connection between master and slave established.", do you still think it could be related to key issues? I am willing to rerun the commands from master1 if you advise.
2024-01-30 23:33:14.274611] I [resource(worker
/opt/tier1data2019/brick):1387:connect_remote] SSH: Initializing SSH connection between master and slave...
[2024-01-30 23:33:15.960004] I [resource(worker
/opt/tier1data2019/brick):1436:connect_remote] SSH: SSH connection between master and slave established. [{duration=1.6852}]
[2024-01-30 23:33:15.960300] I [resource(worker
/opt/tier1data2019/brick):1116:connect] GLUSTER: Mounting gluster volume locally...
[2024-01-30 23:33:16.995715] I [resource(worker
/opt/tier1data2019/brick):1139:connect] GLUSTER: Mounted gluster volume [{duration=1.0353}]
[2024-01-30 23:33:16.995905] I [subcmds(worker
/opt/tier1data2019/brick):84:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor
[2024-01-30 23:33:19.154376] I [master(worker
/opt/tier1data2019/brick):1662:register] _GMaster: Working dir [{path=/var/lib/misc/gluster/gsyncd/tier1data_drtier1data_drtier1data/opt-tier1data2019-brick}]
[2024-01-30 23:33:19.154759] I [resource(worker
/opt/tier1data2019/brick):1292:service_loop] GLUSTER: Register time [{time=1706657599}]
[2024-01-30 23:33:19.191343] I [gsyncdstatus(worker
/opt/tier1data2019/brick):281:set_active] GeorepStatus: Worker Status Change [{status=Active}]
[2024-01-30 23:33:19.191940] I [gsyncdstatus(worker
/opt/tier1data2019/brick):253:set_worker_crawl_status] GeorepStatus: Crawl Status Change [{status=History Crawl}]
[2024-01-30 23:33:19.192105] I [master(worker
/opt/tier1data2019/brick):1576:crawl] _GMaster: starting history crawl [{turns=1}, {stime=(1705935991, 0)}, {etime=1706657599}, {entry_stime=(1705935991, 0)}]
[2024-01-30 23:33:20.269529] I [master(worker
/opt/tier1data2019/brick):1605:crawl] _GMaster: slave's time [{stime=(1705935991, 0)}]
[2024-01-30 23:33:20.385018] E [syncdutils(worker
/opt/tier1data2019/brick):346:log_raise_exception] <top>: Gluster Mount process exited [{error=ENOTCONN}]
[2024-01-30 23:33:21.674] I [monitor(monitor):228:monitor]
Monitor: worker died in startup phase [{brick=/opt/tier1data2019/brick}]
[2024-01-30 23:33:21.11514] I [gsyncdstatus(monitor):248:set_worker_status]
GeorepStatus: Worker Status Change [{status=Faulty}]
Many thanks,
Anant
From: Aravinda <mailto:aravinda at kadalu.tech>
Sent: 31 January 2024 11:14 AM
To: Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Cc: mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>;
Strahil Nikolov <mailto:hunter86_bg at yahoo.com>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
EXTERNAL: Do not click links or open attachments if you do not recognize
the sender.
Hi Anant,
You need to run the gsec_create command when a new node is added to Primary or secondary
gluster system:: execute gsec_create
gluster volume geo-replication tier1data drtier1data::drtier1data create push-pem force
gluster volume geo-replication tier1data drtier1data::drtier1data start
gluster volume geo-replication tier1data drtier1data::drtier1data status
Or use the Geo-rep setup tool fix the key related issues and resetup (https://urldefense.com/v3/__https://github.com/aravindavk/gluster-georep-tools__;!!I_DbfM1H!F7q10L7Ll47-D3yZGbN2O2r5kpvRMP5-jO46OzkZu67d3vzF5AozNKd3umkbfJ7_29i2g8TKkhoGfcySbARDGIvyc-VOX7A$)
gluster-georep-setup tier1data drtier1data::drtier1data
--
gluster system:: execute gsec_create
gluster system:: execute gsec_create
Kadalu Technologies
---- On Wed, 31 Jan 2024 02:49:08 +0530 Anant Saraswat <mailto:anant.saraswat at techblue.co.uk> wrote
---
Hi All,
As per the documentation, if we use `delete` only
it will start the replication from the time where it was left before deleting the session, So I tried that without any luck.
gluster volume geo-replication tier1data drtier1data::drtier1data
delete
gluster volume geo-replication tier1data drtier1data::drtier1data
create push-pem force
gluster volume geo-replication tier1data drtier1data::drtier1data
start
gluster volume geo-replication tier1data drtier1data::drtier1data
status
I have tried to check the drtier1data logs as
well, and all I can see is master1 connects to drtier1data and send disconnect after 5 seconds, please check the following logs from drtier1data.
[2024-01-30
21:04:03.016805 +0000] I [MSGID: 114046] [client-handshake.c:857:client_setvolume_cbk] 0-drtier1data-client-0: Connected, attached to remote volume [{conn-name=drtier1data-client-0}, {remote_subvol=/opt/tier1data2019/brick}]
[2024-01-30 21:04:03.020148
+0000] I [fuse-bridge.c:5296:fuse_init] 0-glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.24 kernel 7.33
[2024-01-30 21:04:03.020197
+0000] I [fuse-bridge.c:5924:fuse_graph_sync] 0-fuse: switched to graph 0
[2024-01-30 21:04:08.573873
+0000] I [fuse-bridge.c:6233:fuse_thread_proc] 0-fuse: initiating unmount of /tmp/gsyncd-aux-mount-c8c41k2k
[2024-01-30 21:04:08.575131
+0000] W [glusterfsd.c:1429:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x817a) [0x7fb907e2e17a] -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xfd) [0x55f97b17dbfd] -->/usr/sbin/glusterfs(cleanup_and_exit+0x58) [0x55f97b17da48] ) 0-: received signum (15),
shutting down
[2024-01-30 21:04:08.575227
+0000] I [fuse-bridge.c:7063:fini] 0-fuse: Unmounting '/tmp/gsyncd-aux-mount-c8c41k2k'.
[2024-01-30 21:04:08.575256
+0000] I [fuse-bridge.c:7068:fini] 0-fuse: Closing fuse connection to '/tmp/gsyncd-aux-mount-c8c41k2k'.
Can anyone suggest how can I find the reason of
getting these disconnect requests from master1 or what shall I check next?
Many thanks,
A
From: Gluster-users <mailto:gluster-users-bounces at gluster.org>
on behalf of Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Sent: 30 January 2024 2:14 PM
To: mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>;
Strahil Nikolov <mailto:hunter86_bg at yahoo.com>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
EXTERNAL: Do not click links or open attachments if you do not recognize
the sender.
Hello Everyone,
I am looking for some help. Can anyone please suggest if it's possible to
promote a master node to be the primary in the geo-replication session?
We have three master nodes and one secondary node. We are facing issues
where geo-replication is consistently failing from the primary master node. We want to check if it works fine from another master node.
Any guidance or assistance would be highly appreciated.
Many thanks,
Anant
From: Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Sent: 29 January 2024 3:55 PM
To: mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>;
Strahil Nikolov <mailto:hunter86_bg at yahoo.com>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
Hi mailto:hunter86_bg at yahoo.com,
We have been running this geo-replication for
more than 5 years and it was working fine till last week, So I think it shouldn't be something which was missed in the initial setup, but I am unable to understand why it's not working now.
I have enabled SSH Debug on the secondary node(drtier1data),
and I can see this in the logs.
Jan 29 14:25:52 drtier1data sshd[1268110]:
debug1: server_input_channel_req: channel 0 request exec reply 1
Jan 29 14:25:52 drtier1data sshd[1268110]:
debug1: session_by_channel: session 0 channel 0
Jan 29 14:25:52 drtier1data sshd[1268110]:
debug1: session_input_channel_req: session 0 req exec
Jan 29 14:25:52 drtier1data sshd[1268110]:
Starting session: command for root from XX.236.28.58 port 53082 id 0
Jan 29 14:25:52 drtier1data sshd[1268095]:
debug1: session_new: session 0
Jan 29 14:25:58 drtier1data sshd[1268110]:
debug1: Received SIGCHLD.
Jan 29 14:25:58 drtier1data sshd[1268110]:
debug1: session_by_pid: pid 1268111
Jan 29 14:25:58 drtier1data sshd[1268110]:
debug1: session_exit_message: session 0 channel 0 pid 1268111
Jan 29 14:25:58 drtier1data sshd[1268110]:
debug1: session_exit_message: release channel 0
Jan 29 14:25:58 drtier1data sshd[1268110]:
Received disconnect from XX.236.28.58 port 53082:11: disconnected by user
Jan 29 14:25:58 drtier1data sshd[1268110]:
Disconnected from user root XX.236.28.58 port 53082
Jan 29 14:25:58 drtier1data sshd[1268110]:
debug1: do_cleanup
Jan 29 14:25:58 drtier1data sshd[1268095]:
debug1: do_cleanup
Jan 29 14:25:58 drtier1data sshd[1268095]:
debug1: PAM: cleanup
Jan 29 14:25:58 drtier1data sshd[1268095]:
debug1: PAM: closing session
Jan 29 14:25:58 drtier1data sshd[1268095]:
pam_unix(sshd:session): session closed for user root
Jan 29 14:25:58 drtier1data sshd[1268095]:
debug1: PAM: deleting credentials
As per the above logs, drtier1data node is getting SIGCHLD from
master1. (Received disconnect from XX.236.28.58 port 53082:11:
disconnected by user)
Also, I have checked the gsyncd.log on master1,
which says "SSH: SSH connection between master and slave established. [{duration=1.7277}]", which means passwordless ssh is working fine.
As per my understanding, Master1 can connect to
the drtier1data server, and then the geo-replication status changes to Active --> History Crawl and then something happens on the master1 which triggers the SSH disconnect.
is it possible to change the master node in geo-replication
so that we can mark master2 as primary, instead of master1?
I am really struggling to fix this issue, Please
help, any pointer is appreciated !!!
Many thanks,
Anant
From: Gluster-users <mailto:gluster-users-bounces at gluster.org>
on behalf of Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Sent: 29 January 2024 12:20 AM
To: mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>;
Strahil Nikolov <mailto:hunter86_bg at yahoo.com>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
EXTERNAL: Do not click links or open attachments if you do not recognize
the sender.
HI Strahil,
As mentioned in my last email, I have copied the
gluster public key from master3 to secondary server, and I can now ssh from all master nodes to secondary server,
but still getting the same error.
[root at master1 geo-replication]# ssh root at drtier1data
-i /var/lib/glusterd/geo-replication/secret.pem
Last login: Mon Jan 29 00:14:32 2024 from
[root at drtier1data ~]#
[root at master2 ~]# ssh -i /var/lib/glusterd/geo-replication/secret.pem root at drtier1data
Last login: Mon Jan 29 00:02:34 2024 from
[root at drtier1data ~]#
[root at master3 ~]# ssh -i /var/lib/glusterd/geo-replication/secret.pem root at drtier1data
Last login: Mon Jan 29 00:14:41 2024 from
[root at drtier1data ~]#
Thanks,
Anant
From: Strahil Nikolov <mailto:hunter86_bg at yahoo.com>
Sent: 28 January 2024 10:07 PM
To: Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>; mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
EXTERNAL: Do not click links or
open attachments if you do not recognize the sender.
Gluster doesn't use the ssh key in /root/.ssh,
thus you need to exchange the public key that corresponds to /var/lib/glusterd/geo-replication/secret.pem . If you don't know the pub key, google how to obtain it from the private key.
Ensure that all hosts can ssh to the secondary
before proceeding with the troubleshooting.
Best Regards,
Strahil Nikolov
On Sun, Jan 28, 2024 at 15:58, Anant Saraswat
<mailto:anant.saraswat at techblue.co.uk>
wrote:
Hi All,
I have now copied /var/lib/glusterd/geo-replication/secret.pem.pub (public key) from master3 to drtier1data /root/.ssh/authorized_keys, and now I can ssh from master node3 to drtier1data using the georep key (/var/lib/glusterd/geo-replication/secret.pem).
But I am still getting the same error, and geo-replication is getting faulty again and
again.
[2024-01-28 13:46:38.897683] I [resource(worker /opt/tier1data2019/brick):1292:service_loop] GLUSTER: Register time [{time=1706449598}]
[2024-01-28 13:46:38.922491] I [gsyncdstatus(worker /opt/tier1data2019/brick):281:set_active] GeorepStatus: Worker Status Change [{status=Active}]
[2024-01-28 13:46:38.923127] I [gsyncdstatus(worker /opt/tier1data2019/brick):253:set_worker_crawl_status] GeorepStatus: Crawl Status Change [{status=History Crawl}]
[2024-01-28 13:46:38.923313] I [master(worker /opt/tier1data2019/brick):1576:crawl] _GMaster: starting history crawl [{turns=1}, {stime=(1705935991, 0)}, {etime=1706449598},
{entry_stime=(1705935991, 0)}]
[2024-01-28 13:46:39.973584] I [master(worker /opt/tier1data2019/brick):1605:crawl] _GMaster: slave's time [{stime=(1705935991, 0)}]
[2024-01-28 13:46:40.98970] E [syncdutils(worker /opt/tier1data2019/brick):346:log_raise_exception] <top>: Gluster Mount process exited [{error=ENOTCONN}]
[2024-01-28 13:46:40.757691] I [monitor(monitor):228:monitor] Monitor: worker died in startup phase [{brick=/opt/tier1data2019/brick}]
[2024-01-28 13:46:40.766860] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Faulty}]
[2024-01-28 13:46:50.793311] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Initializing...}]
[2024-01-28 13:46:50.793469] I [monitor(monitor):160:monitor] Monitor: starting gsyncd worker [{brick=/opt/tier1data2019/brick}, {slave_node=drtier1data}]
[2024-01-28 13:46:50.874474] I [resource(worker /opt/tier1data2019/brick):1387:connect_remote] SSH: Initializing SSH connection between master and slave...
[2024-01-28 13:46:52.659114] I [resource(worker /opt/tier1data2019/brick):1436:connect_remote] SSH: SSH connection between master and slave established. [{duration=1.7844}]
[2024-01-28 13:46:52.659461] I [resource(worker /opt/tier1data2019/brick):1116:connect] GLUSTER: Mounting gluster volume locally...
[2024-01-28 13:46:53.698769] I [resource(worker /opt/tier1data2019/brick):1139:connect] GLUSTER: Mounted gluster volume [{duration=1.0392}]
[2024-01-28 13:46:53.698984] I [subcmds(worker /opt/tier1data2019/brick):84:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor
[2024-01-28 13:46:55.831999] I [master(worker /opt/tier1data2019/brick):1662:register] _GMaster: Working dir [{path=/var/lib/misc/gluster/gsyncd/tier1data_drtier1data_drtier1data/opt-tier1data2019-brick}]
[2024-01-28 13:46:55.832354] I [resource(worker /opt/tier1data2019/brick):1292:service_loop] GLUSTER: Register time [{time=1706449615}]
[2024-01-28 13:46:55.854684] I [gsyncdstatus(worker /opt/tier1data2019/brick):281:set_active] GeorepStatus: Worker Status Change [{status=Active}]
[2024-01-28 13:46:55.855251] I [gsyncdstatus(worker /opt/tier1data2019/brick):253:set_worker_crawl_status] GeorepStatus: Crawl Status Change [{status=History Crawl}]
[2024-01-28 13:46:55.855419] I [master(worker /opt/tier1data2019/brick):1576:crawl] _GMaster: starting history crawl [{turns=1}, {stime=(1705935991, 0)}, {etime=1706449615},
{entry_stime=(1705935991, 0)}]
[2024-01-28 13:46:56.905496] I [master(worker /opt/tier1data2019/brick):1605:crawl] _GMaster: slave's time [{stime=(1705935991, 0)}]
[2024-01-28 13:46:57.38262] E [syncdutils(worker /opt/tier1data2019/brick):346:log_raise_exception] <top>: Gluster Mount process exited [{error=ENOTCONN}]
[2024-01-28 13:46:57.704128] I [monitor(monitor):228:monitor] Monitor: worker died in startup phase [{brick=/opt/tier1data2019/brick}]
[2024-01-28 13:46:57.706743] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Faulty}]
[2024-01-28 13:47:07.741438] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Initializing...}]
[2024-01-28 13:47:07.741582] I [monitor(monitor):160:monitor] Monitor: starting gsyncd worker [{brick=/opt/tier1data2019/brick}, {slave_node=drtier1data}]
[2024-01-28 13:47:07.821284] I [resource(worker /opt/tier1data2019/brick):1387:connect_remote] SSH: Initializing SSH connection between master and slave...
[2024-01-28 13:47:09.573661] I [resource(worker /opt/tier1data2019/brick):1436:connect_remote] SSH: SSH connection between master and slave established. [{duration=1.7521}]
[2024-01-28 13:47:09.573955] I [resource(worker /opt/tier1data2019/brick):1116:connect] GLUSTER: Mounting gluster volume locally...
[2024-01-28 13:47:10.612173] I [resource(worker /opt/tier1data2019/brick):1139:connect] GLUSTER: Mounted gluster volume [{duration=1.0381}]
[2024-01-28 13:47:10.612359] I [subcmds(worker /opt/tier1data2019/brick):84:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor
[2024-01-28 13:47:12.751856] I [master(worker /opt/tier1data2019/brick):1662:register] _GMaster: Working dir [{path=/var/lib/misc/gluster/gsyncd/tier1data_drtier1data_drtier1data/opt-tier1data2019-brick}]
[2024-01-28 13:47:12.752237] I [resource(worker /opt/tier1data2019/brick):1292:service_loop] GLUSTER: Register time [{time=1706449632}]
[2024-01-28 13:47:12.759138] I [gsyncdstatus(worker /opt/tier1data2019/brick):281:set_active] GeorepStatus: Worker Status Change [{status=Active}]
[2024-01-28 13:47:12.759690] I [gsyncdstatus(worker /opt/tier1data2019/brick):253:set_worker_crawl_status] GeorepStatus: Crawl Status Change [{status=History Crawl}]
[2024-01-28 13:47:12.759868] I [master(worker /opt/tier1data2019/brick):1576:crawl] _GMaster: starting history crawl [{turns=1}, {stime=(1705935991, 0)}, {etime=1706449632},
{entry_stime=(1705935991, 0)}]
[2024-01-28 13:47:13.810321] I [master(worker /opt/tier1data2019/brick):1605:crawl] _GMaster: slave's time [{stime=(1705935991, 0)}]
[2024-01-28 13:47:13.924068] E [syncdutils(worker /opt/tier1data2019/brick):346:log_raise_exception] <top>: Gluster Mount process exited [{error=ENOTCONN}]
[2024-01-28 13:47:14.617663] I [monitor(monitor):228:monitor] Monitor: worker died in startup phase [{brick=/opt/tier1data2019/brick}]
[2024-01-28 13:47:14.620035] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Faulty}]
[2024-01-28 13:47:24.646013] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Initializing...}]
[2024-01-28 13:47:24.646157] I [monitor(monitor):160:monitor] Monitor: starting gsyncd worker [{brick=/opt/tier1data2019/brick}, {slave_node=drtier1data}]
[2024-01-28 13:47:24.725510] I [resource(worker /opt/tier1data2019/brick):1387:connect_remote] SSH: Initializing SSH connection between master and slave...
[2024-01-28 13:47:26.491939] I [resource(worker /opt/tier1data2019/brick):1436:connect_remote] SSH: SSH connection between master and slave established. [{duration=1.7662}]
[2024-01-28 13:47:26.492235] I [resource(worker /opt/tier1data2019/brick):1116:connect] GLUSTER: Mounting gluster volume locally...
[2024-01-28 13:47:27.530852] I [resource(worker /opt/tier1data2019/brick):1139:connect] GLUSTER: Mounted gluster volume [{duration=1.0385}]
[2024-01-28 13:47:27.531036] I [subcmds(worker /opt/tier1data2019/brick):84:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor
[2024-01-28 13:47:29.670099] I [master(worker /opt/tier1data2019/brick):1662:register] _GMaster: Working dir [{path=/var/lib/misc/gluster/gsyncd/tier1data_drtier1data_drtier1data/opt-tier1data2019-brick}]
[2024-01-28 13:47:29.670640] I [resource(worker /opt/tier1data2019/brick):1292:service_loop] GLUSTER: Register time [{time=1706449649}]
[2024-01-28 13:47:29.696144] I [gsyncdstatus(worker /opt/tier1data2019/brick):281:set_active] GeorepStatus: Worker Status Change [{status=Active}]
[2024-01-28 13:47:29.696709] I [gsyncdstatus(worker /opt/tier1data2019/brick):253:set_worker_crawl_status] GeorepStatus: Crawl Status Change [{status=History Crawl}]
[2024-01-28 13:47:29.696899] I [master(worker /opt/tier1data2019/brick):1576:crawl] _GMaster: starting history crawl [{turns=1}, {stime=(1705935991, 0)}, {etime=1706449649},
{entry_stime=(1705935991, 0)}]
[2024-01-28 13:47:30.751127] I [master(worker /opt/tier1data2019/brick):1605:crawl] _GMaster: slave's time [{stime=(1705935991, 0)}]
[2024-01-28 13:47:30.885824] E [syncdutils(worker /opt/tier1data2019/brick):346:log_raise_exception] <top>: Gluster Mount process exited [{error=ENOTCONN}]
[2024-01-28 13:47:31.535252] I [monitor(monitor):228:monitor] Monitor: worker died in startup phase [{brick=/opt/tier1data2019/brick}]
[2024-01-28 13:47:31.538450] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Faulty}]
[2024-01-28 13:47:41.564276] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Initializing...}]
[2024-01-28 13:47:41.564426] I [monitor(monitor):160:monitor] Monitor: starting gsyncd worker [{brick=/opt/tier1data2019/brick}, {slave_node=drtier1data}]
[2024-01-28 13:47:41.645110] I [resource(worker /opt/tier1data2019/brick):1387:connect_remote] SSH: Initializing SSH connection between master and slave...
[2024-01-28 13:47:43.435830] I [resource(worker /opt/tier1data2019/brick):1436:connect_remote] SSH: SSH connection between master and slave established. [{duration=1.7904}]
[2024-01-28 13:47:43.436285] I [resource(worker /opt/tier1data2019/brick):1116:connect] GLUSTER: Mounting gluster volume locally...
[2024-01-28 13:47:44.475671] I [resource(worker /opt/tier1data2019/brick):1139:connect] GLUSTER: Mounted gluster volume [{duration=1.0393}]
[2024-01-28 13:47:44.475865] I [subcmds(worker /opt/tier1data2019/brick):84:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor
[2024-01-28 13:47:46.630478] I [master(worker /opt/tier1data2019/brick):1662:register] _GMaster: Working dir [{path=/var/lib/misc/gluster/gsyncd/tier1data_drtier1data_drtier1data/opt-tier1data2019-brick}]
[2024-01-28 13:47:46.630924] I [resource(worker /opt/tier1data2019/brick):1292:service_loop] GLUSTER: Register time [{time=1706449666}]
[2024-01-28 13:47:46.655069] I [gsyncdstatus(worker /opt/tier1data2019/brick):281:set_active] GeorepStatus: Worker Status Change [{status=Active}]
[2024-01-28 13:47:46.655752] I [gsyncdstatus(worker /opt/tier1data2019/brick):253:set_worker_crawl_status] GeorepStatus: Crawl Status Change [{status=History Crawl}]
[2024-01-28 13:47:46.655926] I [master(worker /opt/tier1data2019/brick):1576:crawl] _GMaster: starting history crawl [{turns=1}, {stime=(1705935991, 0)}, {etime=1706449666},
{entry_stime=(1705935991, 0)}]
[2024-01-28 13:47:47.706875] I [master(worker /opt/tier1data2019/brick):1605:crawl] _GMaster: slave's time [{stime=(1705935991, 0)}]
[2024-01-28 13:47:47.834996] E [syncdutils(worker /opt/tier1data2019/brick):346:log_raise_exception] <top>: Gluster Mount process exited [{error=ENOTCONN}]
[2024-01-28 13:47:48.480822] I [monitor(monitor):228:monitor] Monitor: worker died in startup phase [{brick=/opt/tier1data2019/brick}]
[2024-01-28 13:47:48.491306] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Faulty}]
[2024-01-28 13:47:58.518263] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Initializing...}]
[2024-01-28 13:47:58.518412] I [monitor(monitor):160:monitor] Monitor: starting gsyncd worker [{brick=/opt/tier1data2019/brick}, {slave_node=drtier1data}]
[2024-01-28 13:47:58.601096] I [resource(worker /opt/tier1data2019/brick):1387:connect_remote] SSH: Initializing SSH connection between master and slave...
[2024-01-28 13:48:00.355000] I [resource(worker /opt/tier1data2019/brick):1436:connect_remote] SSH: SSH connection between master and slave established. [{duration=1.7537}]
[2024-01-28 13:48:00.355345] I [resource(worker /opt/tier1data2019/brick):1116:connect] GLUSTER: Mounting gluster volume locally...
[2024-01-28 13:48:01.395025] I [resource(worker /opt/tier1data2019/brick):1139:connect] GLUSTER: Mounted gluster volume [{duration=1.0396}]
[2024-01-28 13:48:01.395212] I [subcmds(worker /opt/tier1data2019/brick):84:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor
[2024-01-28 13:48:03.541059] I [master(worker /opt/tier1data2019/brick):1662:register] _GMaster: Working dir [{path=/var/lib/misc/gluster/gsyncd/tier1data_drtier1data_drtier1data/opt-tier1data2019-brick}]
[2024-01-28 13:48:03.541481] I [resource(worker /opt/tier1data2019/brick):1292:service_loop] GLUSTER: Register time [{time=1706449683}]
[2024-01-28 13:48:03.567552] I [gsyncdstatus(worker /opt/tier1data2019/brick):281:set_active] GeorepStatus: Worker Status Change [{status=Active}]
[2024-01-28 13:48:03.568172] I [gsyncdstatus(worker /opt/tier1data2019/brick):253:set_worker_crawl_status] GeorepStatus: Crawl Status Change [{status=History Crawl}]
[2024-01-28 13:48:03.568376] I [master(worker /opt/tier1data2019/brick):1576:crawl] _GMaster: starting history crawl [{turns=1}, {stime=(1705935991, 0)}, {etime=1706449683},
{entry_stime=(1705935991, 0)}]
[2024-01-28 13:48:04.621488] I [master(worker /opt/tier1data2019/brick):1605:crawl] _GMaster: slave's time [{stime=(1705935991, 0)}]
[2024-01-28 13:48:04.742268] E [syncdutils(worker /opt/tier1data2019/brick):346:log_raise_exception] <top>: Gluster Mount process exited [{error=ENOTCONN}]
[2024-01-28 13:48:04.919335] I [master(worker /opt/tier1data2019/brick):2013:syncjob] Syncer: Sync Time Taken [{job=3}, {num_files=10}, {return_code=3}, {duration=0.0180}]
[2024-01-28 13:48:04.919919] E [syncdutils(worker /opt/tier1data2019/brick):847:errlog] Popen: command returned error [{cmd=rsync -aR0 --inplace --files-from=- --super --stats
--numeric-ids --no-implied-dirs --existing --xattrs --acls --ignore-missing-args . -e ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-zo_ev6yu/75785990b3233f5dbbab9f43cc3ed895.sock
drtier1data:/proc/799165/cwd}, {error=3}]
[2024-01-28 13:48:05.399226] I [monitor(monitor):228:monitor] Monitor: worker died in startup phase [{brick=/opt/tier1data2019/brick}]
[2024-01-28 13:48:05.403931] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Faulty}]
[2024-01-28 13:48:15.430175] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Initializing...}]
[2024-01-28 13:48:15.430308] I [monitor(monitor):160:monitor] Monitor: starting gsyncd worker [{brick=/opt/tier1data2019/brick}, {slave_node=drtier1data}]
[2024-01-28 13:48:15.510770] I [resource(worker /opt/tier1data2019/brick):1387:connect_remote] SSH: Initializing SSH connection between master and slave...
[2024-01-28 13:48:17.240311] I [resource(worker /opt/tier1data2019/brick):1436:connect_remote] SSH: SSH connection between master and slave established. [{duration=1.7294}]
[2024-01-28 13:48:17.240509] I [resource(worker /opt/tier1data2019/brick):1116:connect] GLUSTER: Mounting gluster volume locally...
[2024-01-28 13:48:18.279007] I [resource(worker /opt/tier1data2019/brick):1139:connect] GLUSTER: Mounted gluster volume [{duration=1.0384}]
[2024-01-28 13:48:18.279195] I [subcmds(worker /opt/tier1data2019/brick):84:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor
[2024-01-28 13:48:20.455937] I [master(worker /opt/tier1data2019/brick):1662:register] _GMaster: Working dir [{path=/var/lib/misc/gluster/gsyncd/tier1data_drtier1data_drtier1data/opt-tier1data2019-brick}]
[2024-01-28 13:48:20.456274] I [resource(worker /opt/tier1data2019/brick):1292:service_loop] GLUSTER: Register time [{time=1706449700}]
[2024-01-28 13:48:20.464288] I [gsyncdstatus(worker /opt/tier1data2019/brick):281:set_active] GeorepStatus: Worker Status Change [{status=Active}]
[2024-01-28 13:48:20.464807] I [gsyncdstatus(worker /opt/tier1data2019/brick):253:set_worker_crawl_status] GeorepStatus: Crawl Status Change [{status=History Crawl}]
[2024-01-28 13:48:20.464970] I [master(worker /opt/tier1data2019/brick):1576:crawl] _GMaster: starting history crawl [{turns=1}, {stime=(1705935991, 0)}, {etime=1706449700},
{entry_stime=(1705935991, 0)}]
[2024-01-28 13:48:21.514201] I [master(worker /opt/tier1data2019/brick):1605:crawl] _GMaster: slave's time [{stime=(1705935991, 0)}]
[2024-01-28 13:48:21.644609] E [syncdutils(worker /opt/tier1data2019/brick):346:log_raise_exception] <top>: Gluster Mount process exited [{error=ENOTCONN}]
[2024-01-28 13:48:22.284920] I [monitor(monitor):228:monitor] Monitor: worker died in startup phase [{brick=/opt/tier1data2019/brick}]
[2024-01-28 13:48:22.286189] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Faulty}]
[2024-01-28 13:48:32.312378] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Initializing...}]
[2024-01-28 13:48:32.312526] I [monitor(monitor):160:monitor] Monitor: starting gsyncd worker [{brick=/opt/tier1data2019/brick}, {slave_node=drtier1data}]
[2024-01-28 13:48:32.393484] I [resource(worker /opt/tier1data2019/brick):1387:connect_remote] SSH: Initializing SSH connection between master and slave...
[2024-01-28 13:48:34.91825] I [resource(worker /opt/tier1data2019/brick):1436:connect_remote] SSH: SSH connection between master and slave established. [{duration=1.6981}]
[2024-01-28 13:48:34.92130] I [resource(worker /opt/tier1data2019/brick):1116:connect] GLUSTER: Mounting gluster volume locally...
Thanks,
Anant
From: Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Sent: 28 January 2024 1:33 AM
To: Strahil Nikolov <mailto:hunter86_bg at yahoo.com>; mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
Hi mailto:hunter86_bg at yahoo.com,
I have checked the ssh connection from all the master servers and I can ssh drtier1data from master1 and master2 server(old
master servers), but I am unable to ssh drtier1data from
master3 (new node).
[root at master3 ~]# ssh -i /var/lib/glusterd/geo-replication/secret.pem root at drtier1data
Traceback (most recent call last):
File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line 325, in <module>
main()
File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line 259, in main
if args.subcmd in ("worker"):
TypeError: 'in <string>' requires string as left operand, not NoneType
Connection to drtier1data closed.
But I am able to ssh drtier1data from
master3 without using the georep key.
[root at master3 ~]# ssh root at drtier1data
Last login: Sun Jan 28 01:16:25 2024 from 87.246.74.32
[root at drtier1data ~]#
Also, today I restarted the gluster server on master1 as geo-replication is trying to be active from master1 server, and sometimes I
am getting the following error in gsyncd.log
[2024-01-28 01:27:24.722663] E [syncdutils(worker /opt/tier1data2019/brick):847:errlog] Popen: command returned error [{cmd=rsync
-aR0 --inplace --files-from=- --super --stats --numeric-ids --no-implied-dirs --existing --xattrs --acls --ignore-missing-args . -e ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret.pem -p 22 -oControlMaster=auto
-S /tmp/gsyncd-aux-ssh-0exuoeg7/75785990b3233f5dbbab9f43cc3ed895.sock drtier1data:/proc/553418/cwd}, {error=3}]
Many thanks,
Anant
From: Strahil Nikolov <mailto:hunter86_bg at yahoo.com>
Sent: 27 January 2024 5:25 AM
To: mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>;
Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Subject: Re: [Gluster-users] Geo-replication status is getting Faulty after few seconds
EXTERNAL: Do not click links or open attachments if you do not recognize the sender.
Don't forget to test with the georep key. I think it was /var/lib/glusterd/geo-replication/secret.pem
Best Regards,
Strahil Nikolov
В събота, 27 януари 2024 г. в 07:24:07 ч. Гринуич+2, Strahil Nikolov <mailto:hunter86_bg at yahoo.com> написа:
Hi Anant,
i would first start checking if you can do ssh from all masters to the slave node.If you haven't setup a dedicated user for the session, then gluster is using root.
Best Regards,
Strahil Nikolov
В петък, 26 януари 2024 г. в 18:07:59 ч. Гринуич+2, Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
написа:
Hi All,
I have run the following commands on master3, and that has added master3 to geo-replication.
gluster system:: execute gsec_create
gluster volume geo-replication tier1data drtier1data::drtier1data create push-pem force
gluster volume geo-replication tier1data drtier1data::drtier1data stop
gluster volume geo-replication tier1data drtier1data::drtier1data start
Now I am able to start the geo-replication, but I am getting the same error.
[2024-01-24 19:51:24.80892] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Initializing...}]
[2024-01-24 19:51:24.81020] I [monitor(monitor):160:monitor] Monitor: starting gsyncd worker [{brick=/opt/tier1data2019/brick}, {slave_node=drtier1data}]
[2024-01-24 19:51:24.158021] I [resource(worker /opt/tier1data2019/brick):1387:connect_remote] SSH: Initializing SSH connection between master and slave...
[2024-01-24 19:51:25.951998] I [resource(worker /opt/tier1data2019/brick):1436:connect_remote] SSH: SSH connection between master and slave established. [{duration=1.7938}]
[2024-01-24 19:51:25.952292] I [resource(worker /opt/tier1data2019/brick):1116:connect] GLUSTER: Mounting gluster volume locally...
[2024-01-24 19:51:26.986974] I [resource(worker /opt/tier1data2019/brick):1139:connect] GLUSTER: Mounted gluster volume [{duration=1.0346}]
[2024-01-24 19:51:26.987137] I [subcmds(worker /opt/tier1data2019/brick):84:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor
[2024-01-24 19:51:29.139131] I [master(worker /opt/tier1data2019/brick):1662:register] _GMaster: Working dir [{path=/var/lib/misc/gluster/gsyncd/tier1data_drtier1data_drtier1data/opt-tier1data2019-brick}]
[2024-01-24 19:51:29.139531] I [resource(worker /opt/tier1data2019/brick):1292:service_loop] GLUSTER: Register time [{time=1706125889}]
[2024-01-24 19:51:29.173877] I [gsyncdstatus(worker /opt/tier1data2019/brick):281:set_active] GeorepStatus: Worker Status Change [{status=Active}]
[2024-01-24 19:51:29.174407] I [gsyncdstatus(worker /opt/tier1data2019/brick):253:set_worker_crawl_status] GeorepStatus: Crawl Status Change [{status=History Crawl}]
[2024-01-24 19:51:29.174558] I [master(worker /opt/tier1data2019/brick):1576:crawl] _GMaster: starting history crawl [{turns=1}, {stime=(1705935991, 0)}, {etime=1706125889}, {entry_stime=(1705935991, 0)}]
[2024-01-24 19:51:30.251965] I [master(worker /opt/tier1data2019/brick):1605:crawl] _GMaster: slave's time [{stime=(1705935991, 0)}]
[2024-01-24 19:51:30.376715] E [syncdutils(worker /opt/tier1data2019/brick):346:log_raise_exception] <top>: Gluster Mount process exited [{error=ENOTCONN}]
[2024-01-24 19:51:30.991856] I [monitor(monitor):228:monitor] Monitor: worker died in startup phase [{brick=/opt/tier1data2019/brick}]
[2024-01-24 19:51:30.993608] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status Change [{status=Faulty}]
Any idea why it's stuck in this loop?
Thanks,
Anant
________________________________
From: Gluster-users <mailto:gluster-users-bounces at gluster.org> on behalf of Anant Saraswat <mailto:anant.saraswat at techblue.co.uk>
Sent: 22 January 2024 9:00 PM
To: mailto:gluster-users at gluster.org <mailto:gluster-users at gluster.org>
Subject: [Gluster-users] Geo-replication status is getting Faulty after few seconds
EXTERNAL: Do not click links or open attachments if you do not recognize the sender.
Hi There,
We have a Gluster setup with three master nodes in replicated mode and one slave node with geo-replication.
# gluster volume info
Volume Name: tier1data
Type: Replicate
Volume ID: 93c45c14-f700-4d50-962b-7653be471e27
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: master1:/opt/tier1data2019/brick
Brick2: master2:/opt/tier1data2019/brick
Brick3: master3:/opt/tier1data2019/brick
master1 |master2 | ------------------------------geo-replication----------------------------- | drtier1datamaster3 |
We added the master3 node a few months back, the initial setup consisted of 2 master nodes and one geo-replicated slave(drtier1data).
Our geo-replication was functioning well with the initial two master nodes (master1 and master2), where master1 was active and master2 was in passive mode. However, today, we started experiencing issues where geo-replication suddenly stopped and became stuck
in a loop of Initializing..., Active.. Faulty on master1, while master2 remained in passive mode.
Upon checking the gsyncd.log on the master1 node, we observed the following error (please refer to the attached logs for more details):
E [syncdutils(worker /opt/tier1data2019/brick):346:log_raise_exception] <top>: Gluster Mount process exited [{error=ENOTCONN}]
# gluster volume geo-replication tier1data status
MASTER NODE MASTER VOL MASTER BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
master1 tier1data /opt/tier1data2019/brick root ssh://drtier1data::drtier1data N/A Faulty N/A N/A
master2 tier1data /opt/tier1data2019/brick root ssh://drtier1data::drtier1data Passive N/A N/A
Suspecting an issue on the drtier1data(slave), I attempted to restart Gluster on the slave node, also tried to restart drtier1data server without any luck.
After that I tried the following command to get the Primary-log-file for geo-replication on master1, and got the following error.
# gluster volume geo-replication tier1data drtier1data::drtier1data config log-file
Staging failed on master3. Error: Geo-replication session between tier1data and drtier1data::drtier1data does not exist.
geo-replication command failed
Master3 was the new node added a few months back, but geo-replication was working until today, and we never added this node under geo-replication.
After that, I forcefully stopped the geo-replication, thinking that restarting geo-replication might fix the issue. However, now the geo-replication is not starting and is giving the same error.
# gluster volume geo-replication tier1data drtier1data::drtier1data start force
Staging failed on master3. Error: Geo-replication session between tier1data and drtier1data::drtier1data does not exist.
geo-replication command failed
Can anyone please suggest what I should do next to resolve this issue? As there is 5TB of data in this volume, I don't want to resync the entire data to drtier1data. Instead, I want to resume the sync from where it last stopped.
Thanks in advance for any guidance/help.
Kind regards,
Anant
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the sender. This message contains confidential
information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this
email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the sender. This message contains confidential
information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this
email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
________
Community Meeting Calendar:
Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://urldefense.com/v3/__https://meet.google.com/cpu-eiue-hvk__;!!I_DbfM1H!FIFMVBFvoomIXp1pMhjtLbD-1B_qztpAUPBHP5MST7a1hcf3FP8o6GkbQwzQUnS2nT_YIQ1MF7GV_PtM0CAQoOCo4VSgaw$
Gluster-users mailing list
mailto:Gluster-users at gluster.org
https://urldefense.com/v3/__https://lists.gluster.org/mailman/listinfo/gluster-users__;!!I_DbfM1H!FIFMVBFvoomIXp1pMhjtLbD-1B_qztpAUPBHP5MST7a1hcf3FP8o6GkbQwzQUnS2nT_YIQ1MF7GV_PtM0CAQoOBrmvmlMg$
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error, please notify the sender. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email.
Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error, please notify the sender. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy
this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error, please notify the sender. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy
this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error, please notify the sender. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy
this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
________
Community Meeting Calendar:
Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://urldefense.com/v3/__https://meet.google.com/cpu-eiue-hvk__;!!I_DbfM1H!F7q10L7Ll47-D3yZGbN2O2r5kpvRMP5-jO46OzkZu67d3vzF5AozNKd3umkbfJ7_29i2g8TKkhoGfcySbARDGIvy66WGiu4$
Gluster-users mailing list
mailto:Gluster-users at gluster.org
https://urldefense.com/v3/__https://lists.gluster.org/mailman/listinfo/gluster-users__;!!I_DbfM1H!F7q10L7Ll47-D3yZGbN2O2r5kpvRMP5-jO46OzkZu67d3vzF5AozNKd3umkbfJ7_29i2g8TKkhoGfcySbARDGIvyRXX72tM$
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error, please notify the sender. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy
this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error, please notify the sender. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy
this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
________
Community Meeting Calendar:
Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://urldefense.com/v3/__https://meet.google.com/cpu-eiue-hvk__;!!I_DbfM1H!BhqOtEyWh2TghCsLjQAu6kNSYqtFoRKfU8nSfUnVX4ZZfmlMRVka_BTot4C1XsR1fBFnoBMgNlYUi-xIXH9J5jo8klnopO0$
Gluster-users mailing list
mailto:Gluster-users at gluster.org
https://urldefense.com/v3/__https://lists.gluster.org/mailman/listinfo/gluster-users__;!!I_DbfM1H!BhqOtEyWh2TghCsLjQAu6kNSYqtFoRKfU8nSfUnVX4ZZfmlMRVka_BTot4C1XsR1fBFnoBMgNlYUi-xIXH9J5jo8xixa_Vs$
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the sender. This message contains confidential
information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this
email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the sender. This message contains confidential
information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this
email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please
notify the sender. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if
you have received this email by mistake and delete this email from your system.
If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Thanks for your cooperation.
________
Community Meeting Calendar:
Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://meet.google.com/cpu-eiue-hvk
Gluster-users mailing list
Gluster-users at gluster.org
https://lists.gluster.org/mailman/listinfo/gluster-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20240206/bd16bd87/attachment-0001.html>
More information about the Gluster-users
mailing list