[Gluster-users] gluster 5.11 issue: Endless performing entry selfheal / Completed entry selfheal on the same pending heal files after server reboot + very high load
Hari Gowtham
hgowtham at redhat.com
Fri May 8 06:32:02 UTC 2020
The heal info is working fine. The explanation to what's happening:
When a node goes down, the changes to this node can't be done. So on the
other nodes which were up, get the changes and keeps track saying
these files were changed (note: this change hasn't been reflected to the
node which was down). Once the node down comes back up,
it doesn't know what happened when it was down. But the other nodes know
that there are a few changes which didn't make it to the rebooted node.
So the node down is blamed by the other nodes .This is what is shown in the
heal info. As the node which was up doesn't have any change that went into
that node alone.
It says 0 files to be healed and the other nodes as it has the data say
which are the files that need to heal.
This is the expected working.
So as per the rebooted node, heal info is working fine.
About healing the file itself:
Doing an operation on a file, triggers client side heal as per the design,
that's the reason these files are getting corrected after the md5sum (I
hope this is done from the client side not the backend itself).
So this is expected.
About the heals not happening for a long time, there can be some issue
there.
@Karthik Subrahmanya <ksubrahm at redhat.com> is the better person to help you
with this.
About the CPU usage going higher:
We need info about what is consuming more CPU.
Glusterd needs to do a bit of handshake and connect after reboot. During
this a little bit of data is transferred as well.
If the number of nodes goes higher it can contribute to hike.
Similarly, if the heal is happening, then it can increase the usage.
So we need info about what is consuming the cpu to know if it's expected or
not.
If this hike is expected, you can try using cscope to restrict the cpu
usage by that particular process.
On Tue, Apr 28, 2020 at 3:02 AM Artem Russakovskii <archon810 at gmail.com>
wrote:
> Good news, after upgrading to 5.13 and running this scenario again, the
> self heal actually succeeded without my intervention following a server
> reboot.
>
> The load was still high during this process, but at least the endless heal
> issue is resolved.
>
> I'd still love to hear from the team on managing heal load spikes.
>
> Sincerely,
> Artem
>
> --
> Founder, Android Police <http://www.androidpolice.com>, APK Mirror
> <http://www.apkmirror.com/>, Illogical Robot LLC
> beerpla.net | @ArtemR <http://twitter.com/ArtemR>
>
>
> On Sun, Apr 26, 2020 at 3:13 PM Artem Russakovskii <archon810 at gmail.com>
> wrote:
>
>> Hi all,
>>
>> I've been observing this problem for a long time now and it's time to
>> finally figure out what's going on.
>>
>> We're running gluster 5.11 and have a 10TB 1 x 4 = 4 replicate volume.
>> I'll include its slightly redacted config below.
>>
>> When I reboot one of the servers and it goes offline for a bit, when it
>> comes back, heal info tells me there are some files and dirs that are "heal
>> pending". 0 "split-brain" and "possibly healing" - only "heal pending"
>> are >0.
>>
>> 1. For some reason, the server that was rebooted shows "heal pending"
>> 0. All other servers show "heal pending" with some number, say 65.
>> 2. We have cluster.self-heal-daemon enabled.
>> 3. The logs are full of "performing entry selfheal" and "completed
>> entry selfheal" messages that continue to print endlessly.
>> 4. This "heal pending" number never goes down by itself, but it does
>> if I run some operation on it, like md5sum.
>> 5. When the server goes down for reboot and especially when it comes
>> back, the load on ALL servers shoots up through the roof (load of 100+) and
>> ends up bringing everything down, including apache and nginx. My theory is
>> that self-heal kicks in so hard that it kills IO on these attached Linode
>> block devices. However, after some time - say 10 minutes - the load
>> subsides, but the "heal pending" remains and the gluster logs continue to
>> output "performing entry selfheal" and "completed entry selfheal" messages.
>> This load spike has become a huge issue for us because it brings down the
>> whole site for entire minutes.
>> 6. At this point in my investigation, I noticed that the
>> selfheal messages actually repeat for the same gfids over and over.
>> [2020-04-26 21:32:29.877987] I [MSGID: 108026]
>> [afr-self-heal-entry.c:897:afr_selfheal_entry_do] 0-SNIP_data1-replicate-0:
>> performing entry selfheal on 96d282cf-402f-455c-9add-5f03c088a1bc
>> [2020-04-26 21:32:29.901246] I [MSGID: 108026]
>> [afr-self-heal-common.c:1729:afr_log_selfheal] 0-SNIP_data1-replicate-0:
>> Completed entry selfheal on 96d282cf-402f-455c-9add-5f03c088a1bc. sources=
>> sinks=0 1 2
>> [2020-04-26 21:32:32.171959] I [MSGID: 108026]
>> [afr-self-heal-entry.c:897:afr_selfheal_entry_do] 0-SNIP_data1-replicate-0:
>> performing entry selfheal on 96d282cf-402f-455c-9add-5f03c088a1bc
>> [2020-04-26 21:32:32.225828] I [MSGID: 108026]
>> [afr-self-heal-common.c:1729:afr_log_selfheal] 0-SNIP_data1-replicate-0:
>> Completed entry selfheal on 96d282cf-402f-455c-9add-5f03c088a1bc. sources=
>> sinks=0 1 2
>> [2020-04-26 21:32:33.346990] I [MSGID: 108026]
>> [afr-self-heal-entry.c:897:afr_selfheal_entry_do] 0-SNIP_data1-replicate-0:
>> performing entry selfheal on 96d282cf-402f-455c-9add-5f03c088a1bc
>> [2020-04-26 21:32:33.374413] I [MSGID: 108026]
>> [afr-self-heal-common.c:1729:afr_log_selfheal] 0-SNIP_data1-replicate-0:
>> Completed entry selfheal on 96d282cf-402f-455c-9add-5f03c088a1bc. sources=
>> sinks=0 1 2
>> 7. I used gfid-resolver.sh from https://gist.github.com/4392640.git
>> to resolve this gfid to the real location and yup - it was one of the files
>> (a dir actually) listed as "heal pending" in heal info. As soon as I ran
>> md5sum on the file inside (which was also listed in "heal pending"), the
>> log messages stopped repeating for this entry and it disappeared from "heal
>> pending" heal info. These were the final log lines:
>> [2020-04-26 21:32:35.642662] I [MSGID: 108026]
>> [afr-self-heal-metadata.c:52:__afr_selfheal_metadata_do]
>> 0-SNIP_data1-replicate-0: performing metadata selfheal on
>> 96d282cf-402f-455c-9add-5f03c088a1bc
>> [2020-04-26 21:32:35.658714] I [MSGID: 108026]
>> [afr-self-heal-common.c:1729:afr_log_selfheal] 0-SNIP_data1-replicate-0:
>> Completed metadata selfheal on 96d282cf-402f-455c-9add-5f03c088a1bc.
>> sources=0 [1] 2 sinks=3
>> [2020-04-26 21:32:35.686509] I [MSGID: 108026]
>> [afr-self-heal-entry.c:897:afr_selfheal_entry_do] 0-SNIP_data1-replicate-0:
>> performing entry selfheal on 96d282cf-402f-455c-9add-5f03c088a1bc
>> [2020-04-26 21:32:35.720387] I [MSGID: 108026]
>> [afr-self-heal-common.c:1729:afr_log_selfheal] 0-SNIP_data1-replicate-0:
>> Completed entry selfheal on 96d282cf-402f-455c-9add-5f03c088a1bc. sources=0
>> [1] 2 sinks=3
>>
>> I have to repeat this song and dance every time I reboot servers and run
>> md5sum on each "heal pending" file or else the messages will continue
>> presumably indefinitely. In the meantime, the files seem to be fine when
>> accessed.
>>
>> What I don't understand is:
>>
>> 1. Why doesn't gluster just heal them properly instead of getting
>> stuck? Or maybe this was fixed in v6 or v7, which I haven't upgraded to due
>> to waiting for another unrelated issue to be fixed?
>> 2. Why does heal info show 0 "heal pending" files on the server that
>> was rebooted, but all other servers show the same number of "heal pending"
>> entries >0?
>> 3. Why are there these insane load spikes upon going down and
>> especially coming back online? Is it related to the issue here? I'm pretty
>> sure that it didn't happen in previous versions of gluster, when this issue
>> didn't manifest - I could easily bring down one of the servers without it
>> creating havoc when it comes back online.
>>
>> Here's the volume info:
>>
>> Volume Name: SNIP_data1
>>
>> Type: Replicate
>>
>> Volume ID: 11ecee7e-d4f8-497a-9994-ceb144d6841e
>>
>> Status: Started
>>
>> Snapshot Count: 0
>>
>> Number of Bricks: 1 x 4 = 4
>>
>> Transport-type: tcp
>>
>> Bricks:
>>
>> Brick1: SNIP:/mnt/SNIP_block1/SNIP_data1
>>
>> Brick2: SNIP:/mnt/SNIP_block1/SNIP_data1
>>
>> Brick3: SNIP:/mnt/SNIP_block1/SNIP_data1
>>
>> Brick4: SNIP:/mnt/SNIP_block1/SNIP_data1
>>
>> Options Reconfigured:
>>
>> performance.client-io-threads: on
>>
>> nfs.disable: on
>>
>> transport.address-family: inet
>>
>> cluster.self-heal-daemon: enable
>>
>> performance.cache-size: 1GB
>>
>> cluster.lookup-optimize: on
>>
>> performance.read-ahead: off
>>
>> client.event-threads: 4
>>
>> server.event-threads: 4
>>
>> performance.io-thread-count: 32
>>
>> cluster.readdir-optimize: on
>>
>> features.cache-invalidation: on
>>
>> features.cache-invalidation-timeout: 600
>>
>> performance.stat-prefetch: on
>>
>> performance.cache-invalidation: on
>>
>> performance.md-cache-timeout: 600
>>
>> network.inode-lru-limit: 500000
>>
>> performance.parallel-readdir: on
>>
>> performance.readdir-ahead: on
>>
>> performance.rda-cache-limit: 256MB
>>
>> network.remote-dio: enable
>>
>> network.ping-timeout: 5
>>
>> cluster.quorum-type: fixed
>>
>> cluster.quorum-count: 1
>>
>> cluster.granular-entry-heal: enable
>>
>> cluster.data-self-heal-algorithm: full
>>
>>
>> Appreciate any insight. Thank you.
>>
>> Sincerely,
>> Artem
>>
>> --
>> Founder, Android Police <http://www.androidpolice.com>, APK Mirror
>> <http://www.apkmirror.com/>, Illogical Robot LLC
>> beerpla.net | @ArtemR <http://twitter.com/ArtemR>
>>
> ________
>
>
>
> Community Meeting Calendar:
>
> Schedule -
> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
> Bridge: https://bluejeans.com/441850968
>
> Gluster-users mailing list
> Gluster-users at gluster.org
> https://lists.gluster.org/mailman/listinfo/gluster-users
>
--
Regards,
Hari Gowtham.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20200508/27c293f8/attachment.html>
More information about the Gluster-users
mailing list