[Gluster-users] Geo-replication: Entry not present on master. Fixing gfid mismatch in slave
David Cunningham
dcunningham at voisonics.com
Thu Jun 11 00:15:36 UTC 2020
Hi Strahil,
Thanks for that. I did search for a file with the gfid in the name, on both
the master nodes and geo-replication slave, but none of them had such a
file. I guess maybe by the time I looked the file had been deleted? Either
that or something is more seriously wrong with invalid gfids.
BTW, I used strace to try and see what gsyncd was up to when using all that
CPU. Running strace attached to gsyncd for 10 seconds gave 168,000 lines of
output, mostly like the following:
read(6, "CHANGELOG.1585775398\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
lseek(6, 1088012288, SEEK_SET) = 1088012288
lseek(6, 1088012288, SEEK_SET) = 1088012288
read(6, "est\nE da6ed6e8-2b49-4a56-b783-d0"..., 4096) = 4096
lseek(6, 1088016384, SEEK_SET) = 1088016384
lseek(6, 1088016384, SEEK_SET) = 1088016384
read(6, "lock-05380315\nE cf5fe292-2ebf-43"..., 4096) = 4096
lseek(6, 1088020480, SEEK_SET) = 1088020480
lseek(6, 1088020480, SEEK_SET) = 1088020480
read(6, "7 10a14313-4f92-4071-83cb-c900ef"..., 4096) = 4096
lseek(6, 1088024576, SEEK_SET) = 1088024576
lseek(6, 1088024576, SEEK_SET) = 1088024576
read(6, "D b70ba2e8-d954-4fb2-b17a-77c8cc"..., 4096) = 4096
lseek(6, 1088028672, SEEK_SET) = 1088028672
lseek(6, 1088028672, SEEK_SET) = 1088028672
read(6, "01681-e324-4f13-ab3a-0e8ae50ff95"..., 4096) = 4096
lseek(6, 1088032768, SEEK_SET) = 1088032768
read(6, "09ef519/voicemail_1585336530_158"..., 4096) = 4096
lseek(6, 1088036864, SEEK_SET) = 1088036864
read(6, "6-4539-8d7f-d17fb8f71d6d\nD 1236c"..., 4096) = 4096
lseek(6, 1088040960, SEEK_SET) = 1088040960
lseek(6, 1088040960, SEEK_SET) = 1088040960
read(6, "6-4d54-8b9b-4146930b3a2d\nD 88287"..., 4096) = 4096
I'm guessing those reads are mostly on the files under .glusterfs? I did
check for files matching the names above and there aren't any matching
"da6ed6e8-2b49-4a56-b783-d0", "cf5fe292-2ebf-43", or
"10a14313-4f92-4071-83cb-c900ef" though.
Any guidance would be appreciated.
On Wed, 10 Jun 2020 at 16:06, Strahil Nikolov <hunter86_bg at yahoo.com> wrote:
> Hey David,
>
> Sadly I just have a feeling that on any brick there is a gfid mismatch,
> but I could be wrong.
>
> As you have the gfid list, please check on all bricks (both master and
> slave) that the file exists (not the one in .gluster , but the real one)
> and it has the same gfid.
>
> You can find the inode via ls and then run a find (don't forget the
> ionice) against the brick and that inode number.
>
> Once you have the full path to the file , test:
> - Mount with FUSE
> - Check file exists ( no '??????' for permissions, size, etc) and can be
> manipulated (maybe 'touch' can be used ?)
> - Find (on all replica sets ) the file and check the gfid
> - Check for heals pending for that gfid
>
>
> Best Regards,
> Strahil Nikolov
>
> На 10 юни 2020 г. 6:37:35 GMT+03:00, David Cunningham <
> dcunningham at voisonics.com> написа:
> >Hi Strahil,
> >
> >Thank you for that. Do you know if these "Stale file handle" errors on
> >the
> >geo-replication slave could be related?
> >
> >[2020-06-10 01:02:32.268989] E [MSGID: 109040]
> >[dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht:
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba: failed to lookup the file
> >on
> >gvol0-dht [Stale file handle]
> >[2020-06-10 01:02:32.269092] W [fuse-bridge.c:897:fuse_attr_cbk]
> >0-glusterfs-fuse: 7434237: STAT()
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
> >[2020-06-10 01:02:32.329280] W [fuse-bridge.c:897:fuse_attr_cbk]
> >0-glusterfs-fuse: 7434251: STAT()
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
> >[2020-06-10 01:02:32.387129] W [fuse-bridge.c:897:fuse_attr_cbk]
> >0-glusterfs-fuse: 7434264: STAT()
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
> >[2020-06-10 01:02:32.448838] W [fuse-bridge.c:897:fuse_attr_cbk]
> >0-glusterfs-fuse: 7434277: STAT()
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
> >[2020-06-10 01:02:32.507196] W [fuse-bridge.c:897:fuse_attr_cbk]
> >0-glusterfs-fuse: 7434290: STAT()
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
> >[2020-06-10 01:02:32.566033] W [fuse-bridge.c:897:fuse_attr_cbk]
> >0-glusterfs-fuse: 7434303: STAT()
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
> >[2020-06-10 01:02:32.625168] W [fuse-bridge.c:897:fuse_attr_cbk]
> >0-glusterfs-fuse: 7434316: STAT()
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
> >[2020-06-10 01:02:32.772442] W [fuse-bridge.c:897:fuse_attr_cbk]
> >0-glusterfs-fuse: 7434329: STAT()
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
> >[2020-06-10 01:02:32.832481] W [fuse-bridge.c:897:fuse_attr_cbk]
> >0-glusterfs-fuse: 7434342: STAT()
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
> >[2020-06-10 01:02:32.891835] W [fuse-bridge.c:897:fuse_attr_cbk]
> >0-glusterfs-fuse: 7434403: STAT()
> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
> >
> >
> >
> >On Tue, 9 Jun 2020 at 16:31, Strahil Nikolov <hunter86_bg at yahoo.com>
> >wrote:
> >
> >> Hey David,
> >>
> >> Can you check the cpu usage in the sar on the rest of the cluster
> >(going
> >> backwards from the day you found the high cpu usage), so we can know
> >if
> >> this behaviour was obseerved on other nodes.
> >>
> >> Maybe that behaviour was "normal" for the push node (which could be
> >> another one) .
> >>
> >> As this script is python, I guess you can put some debug print
> >> statements in it.
> >>
> >> Best Regards,
> >> Strahil Nikolov
> >>
> >> На 9 юни 2020 г. 5:07:11 GMT+03:00, David Cunningham <
> >> dcunningham at voisonics.com> написа:
> >> >Hi Sankarshan,
> >> >
> >> >Thanks for that. So what should we look for to figure out what this
> >> >process
> >> >is doing? In
> >> >/var/log/glusterfs/geo-replication/gvol0_nvfs10_gvol0/gsyncd.log we
> >see
> >> >something like the following logged regularly:
> >> >
> >> >
> >> >[[2020-06-09 02:01:19.670595] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):1454:changelogs_batch_process]
> >> >_GMaster:
> >> >processing changes
> >>
> >>
>
> >>batch=['/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668040',
> >>
> >>
>
> >>'/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668055']
> >> >[2020-06-09 02:01:19.674927] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):1289:process] _GMaster: processing
> >> >change
> >> >
> >>
> >>
>
> >>changelog=/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668040
> >> >[2020-06-09 02:01:19.683098] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):1170:process_change] _GMaster:
> >> >entries: []
> >> >[2020-06-09 02:01:19.695125] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):312:a_syncdata] _GMaster: files
> >> >files=set(['.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17',
> >> >'.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77',
> >> >'.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0',
> >> >'.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435'])
> >> >[2020-06-09 02:01:19.695344] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
> >candidate
> >> >for
> >> >syncing file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17
> >> >[2020-06-09 02:01:19.695508] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
> >candidate
> >> >for
> >> >syncing file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77
> >> >[2020-06-09 02:01:19.695638] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
> >candidate
> >> >for
> >> >syncing file=.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0
> >> >[2020-06-09 02:01:19.695759] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
> >candidate
> >> >for
> >> >syncing file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435
> >> >[2020-06-09 02:01:19.695883] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):1289:process] _GMaster: processing
> >> >change
> >> >
> >>
> >>
>
> >>changelog=/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668055
> >> >[2020-06-09 02:01:19.696170] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):1170:process_change] _GMaster:
> >> >entries: []
> >> >[2020-06-09 02:01:19.714097] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):312:a_syncdata] _GMaster: files
> >> >files=set(['.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17',
> >> >'.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77',
> >> >'.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435'])
> >> >[2020-06-09 02:01:19.714286] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
> >candidate
> >> >for
> >> >syncing file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17
> >> >[2020-06-09 02:01:19.714433] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
> >candidate
> >> >for
> >> >syncing file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77
> >> >[2020-06-09 02:01:19.714577] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
> >candidate
> >> >for
> >> >syncing file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435
> >> >[2020-06-09 02:01:20.179656] D [resource(worker
> >> >/nodirectwritedata/gluster/gvol0):1419:rsync] SSH: files:
> >> >.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17,
> >> >.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77,
> >> >.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0,
> >> >.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435,
> >> >.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17,
> >> >.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77,
> >> >.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435
> >> >[2020-06-09 02:01:20.738632] I [master(worker
> >> >/nodirectwritedata/gluster/gvol0):1954:syncjob] Syncer: Sync Time
> >Taken
> >> >duration=0.5588 num_files=7 job=2 return_code=0
> >> >[2020-06-09 02:01:20.739650] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
> >> > file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17
> >> >[2020-06-09 02:01:20.740041] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
> >> > file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77
> >> >[2020-06-09 02:01:20.740200] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
> >> > file=.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0
> >> >[2020-06-09 02:01:20.740343] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
> >> > file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435
> >> >[2020-06-09 02:01:20.740482] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
> >> > file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17
> >> >[2020-06-09 02:01:20.740616] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
> >> > file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77
> >> >[2020-06-09 02:01:20.740741] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
> >> > file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435
> >> >[2020-06-09 02:01:20.745385] D [repce(worker
> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
> >> >22499:140085349934848:1591668080.75
> >>
> >>
>
> >>done('/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668040',)
> >> >...
> >> >[2020-06-09 02:01:20.746252] D [repce(worker
> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call
> >> >22499:140085349934848:1591668080.75 done -> None
> >> >[2020-06-09 02:01:20.746515] D [repce(worker
> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
> >> >22499:140085349934848:1591668080.75
> >>
> >>
>
> >>done('/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668055',)
> >> >...
> >> >[2020-06-09 02:01:20.747045] D [repce(worker
> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call
> >> >22499:140085349934848:1591668080.75 done -> None
> >> >[2020-06-09 02:01:31.364780] I [gsyncd(config-get):308:main] <top>:
> >> >Using
> >> >session config file
> >>
> >>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
> >> >[2020-06-09 02:01:31.458915] I [gsyncd(status):308:main] <top>:
> >Using
> >> >session config file
> >>
> >>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
> >> >[2020-06-09 02:01:32.156028] I [gsyncd(config-get):308:main] <top>:
> >> >Using
> >> >session config file
> >>
> >>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
> >> >[2020-06-09 02:01:32.250082] I [gsyncd(status):308:main] <top>:
> >Using
> >> >session config file
> >>
> >>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
> >> >[2020-06-09 02:01:33.778866] I [master(worker
> >> >/nodirectwritedata/gluster/gvol0):1384:process] _GMaster: Entry Time
> >> >Taken
> >> > MKD=0 MKN=0 LIN=0 SYM=0 REN=0 RMD=0 CRE=0
> >> >duration=0.0000 UNL=0
> >> >[2020-06-09 02:01:33.779000] I [master(worker
> >> >/nodirectwritedata/gluster/gvol0):1394:process] _GMaster:
> >Data/Metadata
> >> >Time Taken SETA=0 SETX=0 meta_duration=0.0000
> >> > data_duration=14.0839 DATA=11 XATT=0
> >> >[2020-06-09 02:01:33.779195] I [master(worker
> >> >/nodirectwritedata/gluster/gvol0):1404:process] _GMaster: Batch
> >> >Completed
> >> >changelog_end=1591668055 entry_stime=(1591668024, 0)
> >> >changelog_start=1591668040 stime=(1591668054, 0)
> >> >duration=14.1043
> >> > num_changelogs=2 mode=live_changelog
> >> >[2020-06-09 02:01:35.337511] I [gsyncd(config-get):308:main] <top>:
> >> >Using
> >> >session config file
> >>
> >>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
> >> >[2020-06-09 02:01:35.432674] I [gsyncd(status):308:main] <top>:
> >Using
> >> >session config file
> >>
> >>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
> >> >[2020-06-09 02:01:38.784449] D [master(worker
> >> >/nodirectwritedata/gluster/gvol0):551:crawlwrap] _GMaster: ... crawl
> >> >#18195
> >> >done, took 32.533401 seconds
> >> >[2020-06-09 02:01:38.790709] D [repce(worker
> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
> >> >22499:140085349934848:1591668098.79 scan() ...
> >> >[2020-06-09 02:01:38.791342] D [repce(worker
> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call
> >> >22499:140085349934848:1591668098.79 scan -> None
> >> >[2020-06-09 02:01:38.791479] D [repce(worker
> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
> >> >22499:140085349934848:1591668098.79 getchanges() ...
> >> >[2020-06-09 02:01:38.791989] D [repce(worker
> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call
> >> >22499:140085349934848:1591668098.79 getchanges ->
> >>
> >>
>
> >>['/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668069',
> >>
> >>
>
> >>'/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668083',
> >>
> >>
>
> >>'/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668097']
> >> >[2020-06-09 02:01:38.792114] I [master(worker
> >> >/nodirectwritedata/gluster/gvol0):1470:crawl] _GMaster: slave's time
> >> > stime=(1591668054, 0)
> >> >
> >> >Something very similar is logged around every 32 seconds, and I
> >notice
> >> >the
> >> >log above says the crawl took 32 seconds.
> >> >
> >> >
> >> >On Mon, 8 Jun 2020 at 16:22, sankarshan <sankarshan at kadalu.io>
> >wrote:
> >> >
> >> >> Reading through the thread it occurs to me that it would be a
> >> >stronger
> >> >> approach to understand the workload (a general description of the
> >> >> application) and in terms of the releases of GlusterFS running,
> >> >assess
> >> >> if there are new issues to be addressed or if existing sets of
> >> >patches
> >> >> tend to work. Thanks for setting up the debug level in the log.
> >High
> >> >> CPU usage by a geo-replication process would need to be traced
> >back
> >> >to
> >> >> why it really requires that %-age of CPU if it was not doing so
> >> >> previously.
> >> >>
> >> >> On Mon, 8 Jun 2020 at 05:29, David Cunningham
> >> ><dcunningham at voisonics.com>
> >> >> wrote:
> >> >> >
> >> >> > Hi Strahil,
> >> >> >
> >> >> > The CPU is still quite high, with "top" regularly showing 100%
> >CPU
> >> >usage
> >> >> by that process. However it's not clear whether this is really a
> >> >problem,
> >> >> or if it's just normal geo-replication activity. While CPU usage
> >was
> >> >not
> >> >> previously as high on this server, it's not clear whether
> >GlusterFS
> >> >might
> >> >> have made this the "push" node for geo-replication when it used to
> >be
> >> >some
> >> >> other server. Having said that, no other server shows a sudden
> >drop
> >> >in CPU
> >> >> usage.
> >> >> >
> >> >> > Ideally we could find out what the gsyncd process is doing, and
> >> >> therefore whether it's expected or not. Any ideas on that? We did
> >set
> >> >the
> >> >> log level to DEBUG as Sunny suggested.
> >> >> >
> >> >> > Looking at
> >> >>
> >>
> >>
>
> >>/var/log/glusterfs/geo-replication-slaves/gvol0_nvfs10_gvol0/mnt-cafs30-nodirectwritedata-gluster-gvol0.log
> >> >> on the geo-replication slave, we have a lot of lines like the
> >> >following
> >> >> logged.
> >> >> >
> >> >> > [2020-06-06 00:32:43.155856] W [fuse-bridge.c:897:fuse_attr_cbk]
> >> >> 0-glusterfs-fuse: 875853: STAT()
> >> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac => -1 (Stale file
> >handle)
> >> >> > [2020-06-06 00:32:43.219759] W [fuse-bridge.c:897:fuse_attr_cbk]
> >> >> 0-glusterfs-fuse: 875923: STAT()
> >> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac => -1 (Stale file
> >handle)
> >> >> > [2020-06-06 00:32:43.280357] W [fuse-bridge.c:897:fuse_attr_cbk]
> >> >> 0-glusterfs-fuse: 876001: STAT()
> >> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac => -1 (Stale file
> >handle)
> >> >> > The message "E [MSGID: 109040]
> >> >> [dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht:
> >> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac: failed to lookup the
> >> >file on
> >> >> gvol0-dht [Stale file handle]" repeated 9 times between
> >[2020-06-06
> >> >> 00:32:42.689780] and [2020-06-06 00:32:43.280322]
> >> >> > [2020-06-06 09:03:03.660956] E [MSGID: 109040]
> >> >> [dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht:
> >> >> /.gfid/decdd552-d58b-4ddf-b27a-0da9a6fbc38b: failed to lookup the
> >> >file on
> >> >> gvol0-dht [Stale file handle]
> >> >> > [2020-06-06 09:03:03.661057] W [fuse-bridge.c:897:fuse_attr_cbk]
> >> >> 0-glusterfs-fuse: 965375: STAT()
> >> >> /.gfid/decdd552-d58b-4ddf-b27a-0da9a6fbc38b => -1 (Stale file
> >handle)
> >> >> > [2020-06-06 09:03:10.258798] E [MSGID: 109040]
> >> >> [dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht:
> >> >> /.gfid/1d90e129-d40f-4ca4-bea8-0bb3c4c7985a: failed to lookup the
> >> >file on
> >> >> gvol0-dht [Stale file handle]
> >> >> > [2020-06-06 09:03:10.258880] W [fuse-bridge.c:897:fuse_attr_cbk]
> >> >> 0-glusterfs-fuse: 969455: STAT()
> >> >> /.gfid/1d90e129-d40f-4ca4-bea8-0bb3c4c7985a => -1 (Stale file
> >handle)
> >> >> > [2020-06-06 09:09:41.259362] E [MSGID: 109040]
> >> >> [dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht:
> >> >> /.gfid/740efff6-74dd-45be-847f-66919d1179e0: failed to lookup the
> >> >file on
> >> >> gvol0-dht [Stale file handle]
> >> >> > [2020-06-06 09:09:41.259458] W [fuse-bridge.c:897:fuse_attr_cbk]
> >> >> 0-glusterfs-fuse: 1040904: STAT()
> >> >> /.gfid/740efff6-74dd-45be-847f-66919d1179e0 => -1 (Stale file
> >handle)
> >> >> >
> >> >> > Could these errors be part of the problem?
> >> >> >
> >> >> > Thanks again.
> >> >> >
> >> >> >
> >> >> > On Sat, 6 Jun 2020 at 21:21, Strahil Nikolov
> >> ><hunter86_bg at yahoo.com>
> >> >> wrote:
> >> >> >>
> >> >> >> Hey David,
> >> >> >>
> >> >> >> can you check the old logs for gfid mismatch and get a list of
> >> >files
> >> >> that were causing the high cpu .
> >> >> >> Maybe they are related somehow (maybe created by the same
> >> >software
> >> >> , same client version or something else) which could help about
> >> >that.
> >> >> >>
> >> >> >> Also take a look in geo-replication-slave logs.
> >> >> >>
> >> >> >> Does the issue still occurs ?
> >> >> >>
> >> >> >> Best Regards,
> >> >> >> Strahil Nikolov
> >> >> >>
> >> >> >> На 6 юни 2020 г. 1:21:55 GMT+03:00, David Cunningham <
> >> >> dcunningham at voisonics.com> написа:
> >> >> >> >Hi Sunny and Strahil,
> >> >> >> >
> >> >> >> >Thanks again for your responses. We don't have a lot of
> >renaming
> >> >> >> >activity -
> >> >> >> >maybe some, but not a lot. We do have files which are open for
> >> >writing
> >> >> >> >for
> >> >> >> >quite a while - they're call recordings being written as the
> >call
> >> >> >> >happens.
> >> >> >> >
> >> >> >> >We've installed GlusterFS using the Ubuntu packages and I'd
> >> >really like
> >> >> >> >to
> >> >> >> >avoid compiling and applying patches.
> >> >> >> >
> >> >> >> >After enabling DEBUG the log at
> >> >> >>
> >>/var/log/glusterfs/geo-replication/gvol0_nvfs10_gvol0/gsyncd.log
> >> >> >> >doesn't
> >> >> >> >seem to show anything very unusual:
> >> >> >> >
> >> >> >> >[2020-06-03 02:49:01.992177] I [master(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):1384:process] _GMaster:
> >Entry
> >> >Time
> >> >> >> >Taken
> >> >> >> > MKD=0 MKN=0 LIN=0 SYM=0 REN=0 RMD=0CRE=0
> >> >duration=0.0000
> >> >> >> >UNL=0
> >> >> >> >[2020-06-03 02:49:01.992465] I [master(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):1394:process] _GMaster:
> >> >Data/Metadata
> >> >> >> >Time Taken SETA=0 SETX=0
> >> >> >> >meta_duration=0.0000data_duration=13.0954
> >> >> >> > DATA=8 XATT=0
> >> >> >> >[2020-06-03 02:49:01.992863] I [master(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):1404:process] _GMaster:
> >Batch
> >> >> >> >Completed
> >> >> >> >changelog_end=1591152508 entry_stime=(1591152352, 0)
> >> >> >> >changelog_start=1591152494 stime=(1591152507, 0)
> >> >> >> >duration=13.1077
> >> >> >> > num_changelogs=2 mode=live_changelog
> >> >> >> >[2020-06-03 02:49:02.958687] D [repce(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
> >> >> >> >19017:139678812452608:1591152542.96 keep_alive({'version': (1,
> >> >0),
> >> >> >> >'retval': 0, 'uuid': '8ee85fae-f3aa-4285-ad48-67a1dc17ed73',
> >> >'timeout':
> >> >> >> >1591152662, 'volume_mark': (1583043396, 161632)},) ...
> >> >> >> >[2020-06-03 02:49:02.979139] D [repce(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient:
> >call
> >> >> >> >19017:139678812452608:1591152542.96 keep_alive -> 28
> >> >> >> >[2020-06-03 02:49:06.998127] D [master(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):551:crawlwrap] _GMaster: ...
> >> >crawl
> >> >> >> >#114
> >> >> >> >done, took 30.180089 seconds
> >> >> >> >[2020-06-03 02:49:07.10132] D [repce(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
> >> >> >> >19017:139679441716992:1591152547.01 scan() ...
> >> >> >> >[2020-06-03 02:49:07.10781] D [repce(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient:
> >call
> >> >> >> >19017:139679441716992:1591152547.01 scan -> None
> >> >> >> >[2020-06-03 02:49:07.10935] D [repce(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
> >> >> >> >19017:139679441716992:1591152547.01 getchanges() ...
> >> >> >> >[2020-06-03 02:49:07.11579] D [repce(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient:
> >call
> >> >> >> >19017:139679441716992:1591152547.01 getchanges ->
> >> >> >>
> >> >>
> >>
> >>
>
> >>>['/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591152522']
> >> >> >> >[2020-06-03 02:49:07.11720] I [master(worker
> >> >> >> >/nodirectwritedata/gluster/gvol0):1470:crawl] _GMaster:
> >slave's
> >> >time
> >> >> >> >stime=(1591152507, 0)
> >> >> >> >
> >> >> >> >Am I looking in the right place to find out what that
> >gsyncd.py
> >> >process
> >> >> >> >is
> >> >> >> >doing?
> >> >> >> >
> >> >> >> >
> >> >> >> >On Tue, 2 Jun 2020 at 21:58, Sunny Kumar <sunkumar at redhat.com>
> >> >wrote:
> >> >> >> >
> >> >> >> >> Hi David,
> >> >> >> >>
> >> >> >> >> You haven't answered my previous question regarding the type
> >of
> >> >your
> >> >> >> >> workload.
> >> >> >> >> ---
> >> >> >> >> You can use the below command to enable debug log.
> >> >> >> >>
> >> >> >> >> `gluster vol geo-rep <mastervol> <slavehost>::<slavevol>
> >config
> >> >> >> >log-level
> >> >> >> >> DEBUG`
> >> >> >> >>
> >> >> >> >> and after capturing log again switch back to info mode:
> >> >> >> >>
> >> >> >> >> `gluster vol geo-rep <mastervol> <slavehost>::<slavevol>
> >config
> >> >> >> >log-level
> >> >> >> >> INFO`
> >> >> >> >>
> >> >> >> >> Please share the debug log and geo-rep config to debug
> >further:
> >> >> >> >> for config:
> >> >> >> >>
> >> >> >> >> `gluster vol geo-rep <mastervol> <slavehost>::<slavevol>
> >> >config`
> >> >> >> >>
> >> >> >> >> /sunny
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> On Tue, Jun 2, 2020 at 10:18 AM Strahil Nikolov
> >> >> >> ><hunter86_bg at yahoo.com>
> >> >> >> >> wrote:
> >> >> >> >> >
> >> >> >> >> > Hi David,
> >> >> >> >> >
> >> >> >> >> > in which log do you see the entries ?
> >> >> >> >> >
> >> >> >> >> > I think I got an explanation why you see the process only
> >on
> >> >one
> >> >> >> >of the
> >> >> >> >> master nodes - geo-rep session is established from only 1
> >> >master
> >> >> >> >node /I
> >> >> >> >> hope someone corrects me if I'm wrong/ to one slave node.
> >Thus
> >> >it
> >> >> >> >will be
> >> >> >> >> natural to see the high CPU usage on only 1 master node in
> >> >your
> >> >> >> >situation.
> >> >> >> >> >
> >> >> >> >> > Do you see anything else in the :
> >> >> >> >> var/log/glusterfs/geo-replication/<logs> (master nodes) or
> >in
> >> >> >> >> /var/log/glusterfs/geo-replication-slaves (slaves) that
> >could
> >> >hint of
> >> >> >> >the
> >> >> >> >> exact issue. I have a vague feeling that that python script
> >is
> >> >> >> >constantly
> >> >> >> >> looping over some data causing the CPU hog.
> >> >> >> >> >
> >> >> >> >> > Sadly, I can't find an instruction for increasing the log
> >> >level of
> >> >> >> >the
> >> >> >> >> geo rep log .
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > Best Regards,
> >> >> >> >> > Strahil Nikolov
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > На 2 юни 2020 г. 6:14:46 GMT+03:00, David Cunningham <
> >> >> >> >> dcunningham at voisonics.com> написа:
> >> >> >> >> > >Hi Strahil and Sunny,
> >> >> >> >> > >
> >> >> >> >> > >Thank you for the replies. I checked the gfid on the
> >master
> >> >and
> >> >> >> >slaves
> >> >> >> >> > >and
> >> >> >> >> > >they are the same. After moving the file away and back
> >again
> >> >it
> >> >> >> >doesn't
> >> >> >> >> > >seem to be having the issue with that file any more.
> >> >> >> >> > >
> >> >> >> >> > >We are still getting higher CPU usage on one of the
> >master
> >> >nodes
> >> >> >> >than
> >> >> >> >> > >the
> >> >> >> >> > >others. It logs this every few seconds:
> >> >> >> >> > >
> >> >> >> >> > >[2020-06-02 03:10:15.637815] I [master(worker
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1384:process] _GMaster:
> >> >Entry
> >> >> >> >Time
> >> >> >> >> > >Taken
> >> >> >> >> > > MKD=0 MKN=0 LIN=0 SYM=0 REN=0 RMD=0CRE=0
> >> >> >> >duration=0.0000
> >> >> >> >> > >UNL=0
> >> >> >> >> > >[2020-06-02 03:10:15.638010] I [master(worker
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1394:process] _GMaster:
> >> >> >> >Data/Metadata
> >> >> >> >> > >Time Taken SETA=0 SETX=0
> >> >> >> >> > >meta_duration=0.0000data_duration=12.7878
> >> >> >> >> > > DATA=4 XATT=0
> >> >> >> >> > >[2020-06-02 03:10:15.638286] I [master(worker
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1404:process] _GMaster:
> >> >Batch
> >> >> >> >> > >Completed
> >> >> >> >> > >changelog_end=1591067378 entry_stime=(1591067167,
> >0)
> >> >> >> >> > >changelog_start=1591067364 stime=(1591067377, 0)
> >> >> >> >> > >duration=12.8068
> >> >> >> >> > > num_changelogs=2 mode=live_changelog
> >> >> >> >> > >[2020-06-02 03:10:20.658601] I [master(worker
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1470:crawl] _GMaster:
> >> >slave's
> >> >> >> >time
> >> >> >> >> > > stime=(1591067377, 0)
> >> >> >> >> > >[2020-06-02 03:10:34.21799] I [master(worker
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1954:syncjob] Syncer:
> >Sync
> >> >Time
> >> >> >> >Taken
> >> >> >> >> > > duration=0.3826 num_files=8 job=1 return_code=0
> >> >> >> >> > >[2020-06-02 03:10:46.440535] I [master(worker
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1384:process] _GMaster:
> >> >Entry
> >> >> >> >Time
> >> >> >> >> > >Taken
> >> >> >> >> > > MKD=0 MKN=0 LIN=0 SYM=0 REN=1 RMD=0CRE=2
> >> >> >> >duration=0.1314
> >> >> >> >> > >UNL=1
> >> >> >> >> > >[2020-06-02 03:10:46.440809] I [master(worker
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1394:process] _GMaster:
> >> >> >> >Data/Metadata
> >> >> >> >> > >Time Taken SETA=0 SETX=0
> >> >> >> >> > >meta_duration=0.0000data_duration=13.0171
> >> >> >> >> > > DATA=14 XATT=0
> >> >> >> >> > >[2020-06-02 03:10:46.441205] I [master(worker
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1404:process] _GMaster:
> >> >Batch
> >> >> >> >> > >Completed
> >> >> >> >> > >changelog_end=1591067420 entry_stime=(1591067419,
> >0)
> >> >> >> >> > >changelog_start=1591067392 stime=(1591067419, 0)
> >> >> >> >> > >duration=13.0322
> >> >> >> >> > > num_changelogs=3 mode=live_changelog
> >> >> >> >> > >[2020-06-02 03:10:51.460925] I [master(worker
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1470:crawl] _GMaster:
> >> >slave's
> >> >> >> >time
> >> >> >> >> > > stime=(1591067419, 0)
> >> >> >> >> > >
> >> >> >> >> > >[2020-06-02 03:11:04.448913] I [master(worker
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1954:syncjob] Syncer:
> >Sync
> >> >Time
> >> >> >> >Taken
> >> >> >> >> > >duration=0.3466 num_files=3 job=1 return_code=0
> >> >> >> >> > >
> >> >> >> >> > >Whereas the other master nodes only log this:
> >> >> >> >> > >
> >> >> >> >> > >[2020-06-02 03:11:33.886938] I
> >[gsyncd(config-get):308:main]
> >> >> >> ><top>:
> >> >> >> >> > >Using
> >> >> >> >> > >session config file
> >> >> >> >> >
> >> >> >>
> >>
> >>>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
> >> >> >> >> > >[2020-06-02 03:11:33.993175] I [gsyncd(status):308:main]
> >> ><top>:
> >> >> >> >Using
> >> >> >> >> > >session config file
> >> >> >> >> >
> >> >> >>
> >>
> >>>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
> >> >> >> >> > >
> >> >> >> >> > >Can anyone help with what might cause the high CPU usage
> >on
> >> >one
> >> >> >> >master
> >> >> >> >> > >node? The process is this one, and is using 70-100% of
> >CPU:
> >> >> >> >> > >
> >> >> >> >> > >python2
> >> >> >>
> >>/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/gsyncd.py
> >> >> >> >> > >worker gvol0 nvfs10::gvol0 --feedback-fd 15 --local-path
> >> >> >> >> > >/nodirectwritedata/gluster/gvol0 --local-node cafs30
> >> >> >> >--local-node-id
> >> >> >> >> > >b7521445-ee93-4fed-8ced-6a609fa8c7d4 --slave-id
> >> >> >> >> > >cdcdb210-839c-4306-a4dc-e696b165ed17 --rpc-fd 12,11,9,13
> >> >> >> >--subvol-num 1
> >> >> >> >> > >--resource-remote nvfs30 --resource-remote-id
> >> >> >> >> > >1e698ccd-aeec-4ec4-96fe-383da8fc3b78
> >> >> >> >> > >
> >> >> >> >> > >Thank you in advance!
> >> >> >> >> > >
> >> >> >> >> > >
> >> >> >> >> > >
> >> >> >> >> > >
> >> >> >> >> > >On Sat, 30 May 2020 at 20:20, Strahil Nikolov
> >> >> >> ><hunter86_bg at yahoo.com>
> >> >> >> >> > >wrote:
> >> >> >> >> > >
> >> >> >> >> > >> Hey David,
> >> >> >> >> > >>
> >> >> >> >> > >> for me a gfid mismatch means that the file was
> >> >> >> >replaced/recreated
> >> >> >> >> > > -
> >> >> >> >> > >> just like vim in linux does (and it is expected for
> >> >config
> >> >> >> >file).
> >> >> >> >> > >>
> >> >> >> >> > >> Have you checked the gfid of the file on both source
> >> >and
> >> >> >> >> > >destination,
> >> >> >> >> > >> do they really match or they are different ?
> >> >> >> >> > >>
> >> >> >> >> > >> What happens when you move away the file from the
> >slave
> >> >,
> >> >> >> >does it
> >> >> >> >> > >fixes
> >> >> >> >> > >> the issue ?
> >> >> >> >> > >>
> >> >> >> >> > >> Best Regards,
> >> >> >> >> > >> Strahil Nikolov
> >> >> >> >> > >>
> >> >> >> >> > >> На 30 май 2020 г. 1:10:56 GMT+03:00, David Cunningham <
> >> >> >> >> > >> dcunningham at voisonics.com> написа:
> >> >> >> >> > >> >Hello,
> >> >> >> >> > >> >
> >> >> >> >> > >> >We're having an issue with a geo-replication process
> >with
> >> >> >> >unusually
> >> >> >> >> > >> >high
> >> >> >> >> > >> >CPU use and giving "Entry not present on master.
> >Fixing
> >> >gfid
> >> >> >> >> > >mismatch
> >> >> >> >> > >> >in
> >> >> >> >> > >> >slave" errors. Can anyone help on this?
> >> >> >> >> > >> >
> >> >> >> >> > >> >We have 3 GlusterFS replica nodes (we'll call the
> >> >master),
> >> >> >> >which
> >> >> >> >> > >also
> >> >> >> >> > >> >push
> >> >> >> >> > >> >data to a remote server (slave) using geo-replication.
> >> >This has
> >> >> >> >been
> >> >> >> >> > >> >running fine for a couple of months, but yesterday one
> >of
> >> >the
> >> >> >> >master
> >> >> >> >> > >> >nodes
> >> >> >> >> > >> >started having unusually high CPU use. It's this
> >process:
> >> >> >> >> > >> >
> >> >> >> >> > >> >root at cafs30:/var/log/glusterfs# ps aux | grep 32048
> >> >> >> >> > >> >root 32048 68.7 0.6 1843140 845756 ? Rl
> >02:51
> >> >> >> >493:51
> >> >> >> >> > >> >python2
> >> >> >> >> > >>
> >> >>/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/gsyncd.py
> >> >> >> >> > >worker
> >> >> >> >> > >> >gvol0 nvfs10::gvol0 --feedback-fd 15 --local-path
> >> >> >> >> > >> >/nodirectwritedata/gluster/gvol0 --local-node cafs30
> >> >> >> >--local-node-id
> >> >> >> >> > >> >b7521445-ee93-4fed-8ced-6a609fa8c7d4 --slave-id
> >> >> >> >> > >> >cdcdb210-839c-4306-a4dc-e696b165ed17 --rpc-fd
> >12,11,9,13
> >> >> >> >> > >--subvol-num 1
> >> >> >> >> > >> >--resource-remote nvfs30 --resource-remote-id
> >> >> >> >> > >> >1e698ccd-aeec-4ec4-96fe-383da8fc3b78
> >> >> >> >> > >> >
> >> >> >> >> > >> >Here's what is being logged in
> >> >> >> >> > >>
> >> >> >>
> >> >>>/var/log/glusterfs/geo-replication/gvol0_nvfs10_gvol0/gsyncd.log:
> >> >> >> >> > >> >
> >> >> >> >> > >> >[2020-05-29 21:57:18.843524] I [master(worker
> >> >> >> >> > >> >/nodirectwritedata/gluster/gvol0):1470:crawl]
> >_GMaster:
> >> >slave's
> >> >> >> >time
> >> >> >> >> > >> > stime=(1590789408, 0)
> >> >> >> >> > >> >[2020-05-29 21:57:30.626172] I [master(worker
> >> >> >> >> > >>
> >> >> >>
> >> >>>/nodirectwritedata/gluster/gvol0):813:fix_possible_entry_failures]
> >> >> >> >> > >> >_GMaster: Entry not present on master. Fixing gfid
> >> >mismatch in
> >> >> >> >> > >slave.
> >> >> >> >> > >> >Deleting the entry retry_count=1 entry=({u'uid':
> >> >108,
> >> >> >> >u'gfid':
> >> >> >> >> > >> >u'7c0b75e5-d8b7-454f-8010-112d613c599e', u'gid': 117,
> >> >u'mode':
> >> >> >> >> > >33204,
> >> >> >> >> > >> >u'entry':
> >> >> >> >> > >>
> >> >>u'.gfid/c5422396-1578-4b50-a29d-315be2a9c5d8/00a859f7xxxx.cfg',
> >> >> >> >> > >> >u'op': u'CREATE'}, 17, {u'slave_isdir': False,
> >> >> >> >u'gfid_mismatch':
> >> >> >> >> > >True,
> >> >> >> >> > >> >u'slave_name': None, u'slave_gfid':
> >> >> >> >> > >> >u'ec4b0ace-2ec4-4ea5-adbc-9f519b81917c',
> >> >u'name_mismatch':
> >> >> >> >False,
> >> >> >> >> > >> >u'dst':
> >> >> >> >> > >> >False})
> >> >> >> >> > >> >[2020-05-29 21:57:30.627893] I [master(worker
> >> >> >> >> > >>
> >> >> >>
> >> >>>/nodirectwritedata/gluster/gvol0):813:fix_possible_entry_failures]
> >> >> >> >> > >> >_GMaster: Entry not present on master. Fixing gfid
> >> >mismatch in
> >> >> >> >> > >slave.
> >> >> >> >> > >> >Deleting the entry retry_count=1 entry=({u'uid':
> >> >108,
> >> >> >> >u'gfid':
> >> >> >> >> > >> >u'a4d52e40-2e2f-4885-be5f-65fe95a8ebd7', u'gid': 117,
> >> >u'mode':
> >> >> >> >> > >33204,
> >> >> >> >> > >> >u'entry':
> >> >> >> >> > >>
> >> >> >> >> >
> >> >> >>
> >> >>
> >>
>
> >>>>>u'.gfid/f857c42e-22f1-4ce4-8f2e-13bdadedde45/polycom_00a859f7xxxx.cfg',
> >> >> >> >> > >> >u'op': u'CREATE'}, 17, {u'slave_isdir': False,
> >> >> >> >u'gfid_mismatch':
> >> >> >> >> > >True,
> >> >> >> >> > >> >u'slave_name': None, u'slave_gfid':
> >> >> >> >> > >> >u'ece8da77-b5ea-45a7-9af7-7d4d8f55f74a',
> >> >u'name_mismatch':
> >> >> >> >False,
> >> >> >> >> > >> >u'dst':
> >> >> >> >> > >> >False})
> >> >> >> >> > >> >[2020-05-29 21:57:30.629532] I [master(worker
> >> >> >> >> > >>
> >> >> >>
> >> >>>/nodirectwritedata/gluster/gvol0):813:fix_possible_entry_failures]
> >> >> >> >> > >> >_GMaster: Entry not present on master. Fixing gfid
> >> >mismatch in
> >> >> >> >> > >slave.
> >> >> >> >> > >> >Deleting the entry retry_count=1 entry=({u'uid':
> >> >108,
> >> >> >> >u'gfid':
> >> >> >> >> > >> >u'3c525ad8-aeb2-46b6-9c41-7fb4987916f8', u'gid': 117,
> >> >u'mode':
> >> >> >> >> > >33204,
> >> >> >> >> > >> >u'entry':
> >> >> >> >> > >>
> >> >> >> >> >
> >> >> >> >>
> >> >> >>
> >> >>
> >>
> >>
>
> >>>>>u'.gfid/f857c42e-22f1-4ce4-8f2e-13bdadedde45/00a859f7xxxx-directory.xml',
> >> >> >> >> > >> >u'op': u'CREATE'}, 17, {u'slave_isdir': False,
> >> >> >> >u'gfid_mismatch':
> >> >> >> >> > >True,
> >> >> >> >> > >> >u'slave_name': None, u'slave_gfid':
> >> >> >> >> > >> >u'06717b5a-d842-495d-bd25-aab9cd454490',
> >> >u'name_mismatch':
> >> >> >> >False,
> >> >> >> >> > >> >u'dst':
> >> >> >> >> > >> >False})
> >> >> >> >> > >> >[2020-05-29 21:57:30.659123] I [master(worker
> >> >> >> >> > >>
> >> >>/nodirectwritedata/gluster/gvol0):942:handle_entry_failures]
> >> >> >> >> > >_GMaster:
> >> >> >> >> > >> >Sucessfully fixed entry ops with gfid mismatch
> >> >> >> >retry_count=1
> >> >> >> >> > >> >[2020-05-29 21:57:30.659343] I [master(worker
> >> >> >> >> > >> >/nodirectwritedata/gluster/gvol0):1194:process_change]
> >> >> >> >_GMaster:
> >> >> >> >> > >Retry
> >> >> >> >> > >> >original entries. count = 1
> >> >> >> >> > >> >[2020-05-29 21:57:30.725810] I [master(worker
> >> >> >> >> > >> >/nodirectwritedata/gluster/gvol0):1197:process_change]
> >> >> >> >_GMaster:
> >> >> >> >> > >> >Sucessfully fixed all entry ops with gfid mismatch
> >> >> >> >> > >> >[2020-05-29 21:57:31.747319] I [master(worker
> >> >> >> >> > >> >/nodirectwritedata/gluster/gvol0):1954:syncjob]
> >Syncer:
> >> >Sync
> >> >> >> >Time
> >> >> >> >> > >Taken
> >> >> >> >> > >> >duration=0.7409 num_files=18 job=1 return_code=0
> >> >> >> >> > >> >
> >> >> >> >> > >> >We've verified that the files like
> >> >polycom_00a859f7xxxx.cfg
> >> >> >> >referred
> >> >> >> >> > >to
> >> >> >> >> > >> >in
> >> >> >> >> > >> >the error do exist on the master nodes and slave.
> >> >> >> >> > >> >
> >> >> >> >> > >> >We found this bug fix:
> >> >> >> >> > >> >https://bugzilla.redhat.com/show_bug.cgi?id=1642865
> >> >> >> >> > >> >
> >> >> >> >> > >> >However that fix went in 5.1, and we're running 5.12
> >on
> >> >the
> >> >> >> >master
> >> >> >> >> > >> >nodes
> >> >> >> >> > >> >and slave. A couple of GlusterFS clients connected to
> >the
> >> >> >> >master
> >> >> >> >> > >nodes
> >> >> >> >> > >> >are
> >> >> >> >> > >> >running 5.13.
> >> >> >> >> > >> >
> >> >> >> >> > >> >Would anyone have any suggestions? Thank you in
> >advance.
> >> >> >> >> > >>
> >> >> >> >> > ________
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > Community Meeting Calendar:
> >> >> >> >> >
> >> >> >> >> > Schedule -
> >> >> >> >> > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
> >> >> >> >> > Bridge: https://bluejeans.com/441850968
> >> >> >> >> >
> >> >> >> >> > Gluster-users mailing list
> >> >> >> >> > Gluster-users at gluster.org
> >> >> >> >> > https://lists.gluster.org/mailman/listinfo/gluster-users
> >> >> >> >>
> >> >> >> >>
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > David Cunningham, Voisonics Limited
> >> >> > http://voisonics.com/
> >> >> > USA: +1 213 221 1092
> >> >> > New Zealand: +64 (0)28 2558 3782
> >> >> > ________
> >> >> >
> >> >> >
> >> >> >
> >> >> > Community Meeting Calendar:
> >> >> >
> >> >> > Schedule -
> >> >> > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
> >> >> > Bridge: https://bluejeans.com/441850968
> >> >> >
> >> >> > Gluster-users mailing list
> >> >> > Gluster-users at gluster.org
> >> >> > https://lists.gluster.org/mailman/listinfo/gluster-users
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> sankarshan at kadalu.io | TZ: UTC+0530 | +91 99606 03294
> >> >> kadalu.io : Making it easy to provision storage in k8s!
> >> >> ________
> >> >>
> >> >>
> >> >>
> >> >> Community Meeting Calendar:
> >> >>
> >> >> Schedule -
> >> >> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
> >> >> Bridge: https://bluejeans.com/441850968
> >> >>
> >> >> Gluster-users mailing list
> >> >> Gluster-users at gluster.org
> >> >> https://lists.gluster.org/mailman/listinfo/gluster-users
> >> >>
> >>
>
--
David Cunningham, Voisonics Limited
http://voisonics.com/
USA: +1 213 221 1092
New Zealand: +64 (0)28 2558 3782
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20200611/e7c9d820/attachment.html>
More information about the Gluster-users
mailing list