[Gluster-users] Access to Servers hangs after stop one server...

Gilberto Nunes gilberto.nunes32 at gmail.com
Thu Jan 24 17:20:39 UTC 2019 

I just wanna let you know, guys, that I was able to create 2-server HA with
bellow cmd:

gluster vol create Vol01 replica 2 transport tcp server1:/data/storage
server2:/data/storage
(so here work as replicated mode)

After that, I put this into fstab:
server1:/Vol01 /mnt glusterfs defaults,_netdev,backupvolfile-server=server2
0 0

Then, I shutdown server1 and after a few seconds, the /mnt mounted point
works fine.... I could create others files into it and after server1 back
online,
the files create was replicated from server2 to server1.

Everything works as expected!

Thanks a lot

---
Gilberto Nunes Ferreira

(47) 3025-5907
(47) 99676-7530 - Whatsapp / Telegram

Skype: gilberto.nunes36





Em qui, 24 de jan de 2019 às 12:04, Scott Worthington <
scott.c.worthington at gmail.com> escreveu:

> Amar,
>
> Is this documentation relevant for Diego?
>
>
> https://gluster.readthedocs.io/en/latest/Administrator%20Guide/Setting%20Up%20Clients/#manual-mount
>
> "If backupvolfile-server option is added while mounting fuse client, when
> the first volfile server fails, then the server specified in
> backupvolfile-server option is used as volfile server to mount the
> client."
>
> Or is there 'better' documentation?
>
>
> On Thu, Jan 24, 2019 at 8:51 AM Amar Tumballi Suryanarayan <
> atumball at redhat.com> wrote:
>
>> Also note that, this way of mounting with a 'static' volfile is not
>> recommended as you wouldn't get any features out of gluster's Software
>> Defined Storage behavior.
>>
>> this was an approach we used to have say 8 years before. With the
>> introduction of management daemon called glusterd, the way of dealing with
>> volfiles have changed, and it is created with gluster CLI.
>>
>> About having /etc/fstab not hang when a server is down, search for
>> 'backup-volfile-server' option with glusterfs, and that should be used.
>>
>> Regards,
>> Amar
>>
>> On Thu, Jan 24, 2019 at 7:17 PM Diego Remolina <dijuremo at gmail.com>
>> wrote:
>>
>>> Show us output of:
>>>
>>> gluster v status
>>>
>>> Have you configured firewall rules properly for all ports being used?
>>>
>>> Diego
>>>
>>> On Thu, Jan 24, 2019 at 8:44 AM Gilberto Nunes <
>>> gilberto.nunes32 at gmail.com> wrote:
>>>
>>>> >I think your mount statement in /etc/fstab is only referencing ONE of
>>>> the gluster servers.
>>>> >
>>>> >Please take a look at "More redundant mount" section:
>>>> >
>>>> >https://www.jamescoyle.net/how-to/439-mount-a-glusterfs-volume
>>>> >
>>>> >Then try taking down one of the gluster servers and report back
>>>> results.
>>>>
>>>> Guys! I have followed the very same instruction that found in the
>>>> James's website.
>>>> One of method his mentioned in that website, is create a file into
>>>> /etc/glusterfs directory, named datastore.vol, for instance, with this
>>>> content:
>>>>
>>>> volume remote1
>>>>  type protocol/client
>>>>  option transport-type tcp
>>>>  option remote-host server1
>>>>  option remote-subvolume /data/storage
>>>>  end-volume
>>>>
>>>>  volume remote2
>>>>  type protocol/client
>>>>  option transport-type tcp
>>>>  option remote-host server2
>>>>  option remote-subvolume /data/storage
>>>>  end-volume
>>>>
>>>>  volume remote3
>>>>  type protocol/client
>>>>  option transport-type tcp
>>>>  option remote-host server3
>>>>  option remote-subvolume /data/storage
>>>>  end-volume
>>>>
>>>>  volume replicate
>>>>  type cluster/replicate
>>>>  subvolumes remote1 remote2 remote3
>>>>  end-volume
>>>>
>>>>  volume writebehind
>>>>  type performance/write-behind
>>>>  option window-size 1MB
>>>>  subvolumes replicate
>>>>  end-volume
>>>>
>>>>  volume cache
>>>>  type performance/io-cache
>>>>  option cache-size 512MB
>>>>  subvolumes writebehind
>>>>  end-volume
>>>>
>>>>
>>>> and then include this line into fstab:
>>>>
>>>> /etc/glusterfs/datastore.vol [MOUNT] glusterfs rw,allow_other,
>>>> default_permissions,max_read=131072 0 0
>>>>
>>>> What I doing wrong???
>>>>
>>>> Thanks
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ---
>>>> Gilberto Nunes Ferreira
>>>>
>>>> (47) 3025-5907
>>>> (47) 99676-7530 - Whatsapp / Telegram
>>>>
>>>> Skype: gilberto.nunes36
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Em qui, 24 de jan de 2019 às 11:27, Scott Worthington <
>>>> scott.c.worthington at gmail.com> escreveu:
>>>>
>>>>> I think your mount statement in /etc/fstab is only referencing ONE of
>>>>> the gluster servers.
>>>>>
>>>>> Please take a look at "More redundant mount" section:
>>>>>
>>>>> https://www.jamescoyle.net/how-to/439-mount-a-glusterfs-volume
>>>>>
>>>>> Then try taking down one of the gluster servers and report back
>>>>> results.
>>>>>
>>>>> On Thu, Jan 24, 2019 at 8:24 AM Gilberto Nunes <
>>>>> gilberto.nunes32 at gmail.com> wrote:
>>>>>
>>>>>> Yep!
>>>>>> But as I mentioned in previously e-mail, even with 3 or 4 servers
>>>>>> this issues occurr.
>>>>>> I don't know what's happen.
>>>>>>
>>>>>> ---
>>>>>> Gilberto Nunes Ferreira
>>>>>>
>>>>>> (47) 3025-5907
>>>>>> (47) 99676-7530 - Whatsapp / Telegram
>>>>>>
>>>>>> Skype: gilberto.nunes36
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Em qui, 24 de jan de 2019 às 10:43, Diego Remolina <
>>>>>> dijuremo at gmail.com> escreveu:
>>>>>>
>>>>>>> Glusterfs needs quorum, so if you have two servers and one goes
>>>>>>> down, there is no quorum, so all writes stop until the server comes back
>>>>>>> up. You can add a third server as an arbiter which does not store data in
>>>>>>> the bricks, but still uses some minimal space (to keep metadata for the
>>>>>>> files).
>>>>>>>
>>>>>>> HTH,
>>>>>>>
>>>>>>> DIego
>>>>>>>
>>>>>>> On Wed, Jan 23, 2019 at 3:06 PM Gilberto Nunes <
>>>>>>> gilberto.nunes32 at gmail.com> wrote:
>>>>>>>
>>>>>>>> Hit there...
>>>>>>>>
>>>>>>>> I have set up two server as replica, like this:
>>>>>>>>
>>>>>>>> gluster vol create Vol01 server1:/data/storage server2:/data/storage
>>>>>>>>
>>>>>>>> Then I create a config file in client, like this:
>>>>>>>> volume remote1
>>>>>>>>  type protocol/client
>>>>>>>>  option transport-type tcp
>>>>>>>>  option remote-host server1
>>>>>>>>  option remote-subvolume /data/storage
>>>>>>>>  end-volume
>>>>>>>>
>>>>>>>>  volume remote2
>>>>>>>>  type protocol/client
>>>>>>>>  option transport-type tcp
>>>>>>>>  option remote-host server2
>>>>>>>>  option remote-subvolume /data/storage
>>>>>>>>  end-volume
>>>>>>>>
>>>>>>>>  volume replicate
>>>>>>>>  type cluster/replicate
>>>>>>>>  subvolumes remote1 remote2
>>>>>>>>  end-volume
>>>>>>>>
>>>>>>>>  volume writebehind
>>>>>>>>  type performance/write-behind
>>>>>>>>  option window-size 1MB
>>>>>>>>  subvolumes replicate
>>>>>>>>  end-volume
>>>>>>>>
>>>>>>>>  volume cache
>>>>>>>>  type performance/io-cache
>>>>>>>>  option cache-size 512MB
>>>>>>>>  subvolumes writebehind
>>>>>>>>  end-volume
>>>>>>>>
>>>>>>>> And add this line in /etc/fstab
>>>>>>>>
>>>>>>>> /etc/glusterfs/datastore.vol /mnt glusterfs defaults,_netdev 0 0
>>>>>>>>
>>>>>>>> After mount /mnt, I can access the servers. So far so good!
>>>>>>>> But when I make server1 crash, I was unable to access /mnt or even
>>>>>>>> use
>>>>>>>> gluster vol status
>>>>>>>> on server2
>>>>>>>>
>>>>>>>> Everything hangon!
>>>>>>>>
>>>>>>>> I have tried with replicated, distributed and
>>>>>>>> replicated-distributed too.
>>>>>>>> I am using Debian Stretch, with gluster package installed via apt,
>>>>>>>> provided by Standard Debian Repo, glusterfs-server 3.8.8-1
>>>>>>>>
>>>>>>>> I am sorry if this is a  newbie question, but glusterfs share it's
>>>>>>>> not suppose to keep online if one server goes down?
>>>>>>>>
>>>>>>>> Any adviced will be welcome
>>>>>>>>
>>>>>>>> Best
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ---
>>>>>>>> Gilberto Nunes Ferreira
>>>>>>>>
>>>>>>>> (47) 3025-5907
>>>>>>>> (47) 99676-7530 - Whatsapp / Telegram
>>>>>>>>
>>>>>>>> Skype: gilberto.nunes36
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Gluster-users mailing list
>>>>>>>> Gluster-users at gluster.org
>>>>>>>> https://lists.gluster.org/mailman/listinfo/gluster-users
>>>>>>>
>>>>>>> _______________________________________________
>>>>>> Gluster-users mailing list
>>>>>> Gluster-users at gluster.org
>>>>>> https://lists.gluster.org/mailman/listinfo/gluster-users
>>>>>
>>>>> _______________________________________________
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org
>>> https://lists.gluster.org/mailman/listinfo/gluster-users
>>
>>
>>
>> --
>> Amar Tumballi (amarts)
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> https://lists.gluster.org/mailman/listinfo/gluster-users
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> https://lists.gluster.org/mailman/listinfo/gluster-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20190124/b7c3eb15/attachment.html>

More information about the Gluster-users mailing list