[Gluster-users] Replica 3 - how to replace failed node (peer)

Strahil hunter86_bg at yahoo.com
Wed Apr 10 17:00:20 UTC 2019

I have used reset-brick - but I have just changed the brick layout.
You may give it a try, but I guess you need your new brick to have same amount of space (or more).

Maybe someone more experienced should share a more sound solution.

Best Regards,
Strahil NikolovOn Apr 10, 2019 12:42, Martin Toth <snowmailer at gmail.com> wrote:
> Hi all,
> I am running replica 3 gluster with 3 bricks. One of my servers failed - all disks are showing errors and raid is in fault state.
> Type: Replicate
> Volume ID: 41d5c283-3a74-4af8-a55d-924447bfa59a
> Status: Started
> Number of Bricks: 1 x 3 = 3
> Transport-type: tcp
> Bricks:
> Brick1: node1.san:/tank/gluster/gv0imagestore/brick1
> Brick2: node2.san:/tank/gluster/gv0imagestore/brick1 <— this brick is down
> Brick3: node3.san:/tank/gluster/gv0imagestore/brick1
> So one of my bricks is totally failed (node2). It went down and all data are lost (failed raid on node2). Now I am running only two bricks on 2 servers out from 3.
> This is really critical problem for us, we can lost all data. I want to add new disks to node2, create new raid array on them and try to replace failed brick on this node.
> What is the procedure of replacing Brick2 on node2, can someone advice? I can’t find anything relevant in documentation.
> Thanks in advance,
> Martin
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> https://lists.gluster.org/mailman/listinfo/gluster-users

More information about the Gluster-users mailing list