[Gluster-users] Upgrade to 4.1.1 geo-replication does not work

Kotresh Hiremath Ravishankar khiremat at redhat.com
Wed Jul 18 03:58:48 UTC 2018


Hi Marcus,

I am testing out 4.1 myself and I will have some update today.
For this particular traceback, gsyncd is not able to find the library.
Is it the rpm install? If so, gluster libraries would be in /usr/lib.
Please run the cmd below.

#ldconfig /usr/lib
#ldconfig -p /usr/lib | grep libgf  (This should list libgfchangelog.so)

Geo-rep should be fixed automatically.

Thanks,
Kotresh HR

On Wed, Jul 18, 2018 at 1:27 AM, Marcus Pedersén <marcus.pedersen at slu.se>
wrote:

> Hi again,
>
> I continue to do some testing, but now I have come to a stage where I need
> help.
>
>
> gsyncd.log was complaining about that /usr/local/sbin/gluster was missing
> so I made a link.
>
> After that /usr/local/sbin/glusterfs was missing so I made a link there as
> well.
>
> Both links were done on all slave nodes.
>
>
> Now I have a new error that I can not resolve myself.
>
> It can not open libgfchangelog.so
>
>
> Many thanks!
>
> Regards
>
> Marcus Pedersén
>
>
> Part of gsyncd.log:
>
> OSError: libgfchangelog.so: cannot open shared object file: No such file
> or directory
> [2018-07-17 19:32:06.517106] I [repce(agent /urd-gds/gluster):89:service_loop]
> RepceServer: terminating on reaching EOF.
> [2018-07-17 19:32:07.479553] I [monitor(monitor):272:monitor] Monitor:
> worker died in startup phase     brick=/urd-gds/gluster
> [2018-07-17 19:32:17.500709] I [monitor(monitor):158:monitor] Monitor:
> starting gsyncd worker   brick=/urd-gds/gluster  slave_node=urd-gds-geo-000
> [2018-07-17 19:32:17.541547] I [gsyncd(agent /urd-gds/gluster):297:main]
> <top>: Using session config file       path=/var/lib/glusterd/geo-
> replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
> [2018-07-17 19:32:17.541959] I [gsyncd(worker /urd-gds/gluster):297:main]
> <top>: Using session config file      path=/var/lib/glusterd/geo-
> replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
> [2018-07-17 19:32:17.542363] I [changelogagent(agent
> /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
> [2018-07-17 19:32:17.550894] I [resource(worker /urd-gds/gluster):1348:connect_remote]
> SSH: Initializing SSH connection between master and slave...
> [2018-07-17 19:32:19.166246] I [resource(worker /urd-gds/gluster):1395:connect_remote]
> SSH: SSH connection between master and slave established.
> duration=1.6151
> [2018-07-17 19:32:19.166806] I [resource(worker /urd-gds/gluster):1067:connect]
> GLUSTER: Mounting gluster volume locally...
> [2018-07-17 19:32:20.257344] I [resource(worker /urd-gds/gluster):1090:connect]
> GLUSTER: Mounted gluster volume duration=1.0901
> [2018-07-17 19:32:20.257921] I [subcmds(worker /urd-gds/gluster):70:subcmd_worker]
> <top>: Worker spawn successful. Acknowledging back to monitor
> [2018-07-17 19:32:20.274647] E [repce(agent /urd-gds/gluster):114:worker]
> <top>: call failed:
> Traceback (most recent call last):
>   File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 110, in
> worker
>     res = getattr(self.obj, rmeth)(*in_data[2:])
>   File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", line
> 37, in init
>     return Changes.cl_init()
>   File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", line
> 21, in __getattr__
>     from libgfchangelog import Changes as LChanges
>   File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", line
> 17, in <module>
>     class Changes(object):
>   File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", line
> 19, in Changes
>     use_errno=True)
>   File "/usr/lib64/python2.7/ctypes/__init__.py", line 360, in __init__
>     self._handle = _dlopen(self._name, mode)
> OSError: libgfchangelog.so: cannot open shared object file: No such file
> or directory
> [2018-07-17 19:32:20.275093] E [repce(worker /urd-gds/gluster):206:__call__]
> RepceClient: call failed   call=6078:139982918485824:1531855940.27
> method=init     error=OSError
> [2018-07-17 19:32:20.275192] E [syncdutils(worker
> /urd-gds/gluster):330:log_raise_exception] <top>: FAIL:
> Traceback (most recent call last):
>   File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line 311, in
> main
>     func(args)
>   File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line 72, in
> subcmd_worker
>     local.service_loop(remote)
>   File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line 1236,
> in service_loop
>     changelog_agent.init()
>   File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 225, in
> __call__
>     return self.ins(self.meth, *a)
>   File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 207, in
> __call__
>     raise res
> OSError: libgfchangelog.so: cannot open shared object file: No such file
> or directory
> [2018-07-17 19:32:20.286787] I [repce(agent /urd-gds/gluster):89:service_loop]
> RepceServer: terminating on reaching EOF.
> [2018-07-17 19:32:21.259891] I [monitor(monitor):272:monitor] Monitor:
> worker died in startup phase     brick=/urd-gds/gluster
>
>
>
> ------------------------------
> *Från:* gluster-users-bounces at gluster.org <gluster-users-bounces@
> gluster.org> för Marcus Pedersén <marcus.pedersen at slu.se>
> *Skickat:* den 16 juli 2018 21:59
> *Till:* khiremat at redhat.com
>
> *Kopia:* gluster-users at gluster.org
> *Ämne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
>
>
> Hi Kotresh,
>
> I have been testing for a bit and as you can see from the logs I sent
> before permission is denied for geouser on slave node on file:
>
> /var/log/glusterfs/cli.log
>
> I have turned selinux off and just for testing I changed permissions on
> /var/log/glusterfs/cli.log so geouser can access it.
>
> Starting geo-replication after that gives response successful but all
> nodes get status Faulty.
>
>
> If I run: gluster-mountbroker status
>
> I get:
>
> +-----------------------------+-------------+---------------
> ------------+--------------+--------------------------+
> |             NODE            | NODE STATUS |         MOUNT ROOT
> |    GROUP     |          USERS           |
> +-----------------------------+-------------+---------------
> ------------+--------------+--------------------------+
> | urd-gds-geo-001.hgen.slu.se |          UP | /var/mountbroker-root(OK) |
> geogroup(OK) | geouser(urd-gds-volume)  |
> |       urd-gds-geo-002       |          UP | /var/mountbroker-root(OK) |
> geogroup(OK) | geouser(urd-gds-volume)  |
> |          localhost          |          UP | /var/mountbroker-root(OK) |
> geogroup(OK) | geouser(urd-gds-volume)  |
> +-----------------------------+-------------+---------------
> ------------+--------------+--------------------------+
>
>
> and that is all nodes on slave cluster, so mountbroker seems ok.
>
>
> gsyncd.log logs an error about /usr/local/sbin/gluster is missing.
>
> That is correct cos gluster is in /sbin/gluster and /urs/sbin/gluster
>
> Another error is that SSH between master and slave is broken,
>
> but now when I have changed permission on /var/log/glusterfs/cli.log I can
> run:
>
> ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i
> /var/lib/glusterd/geo-replication/secret.pem -p 22 geouser at urd-gds-geo-001
> gluster --xml --remote-host=localhost volume info urd-gds-volume
>
> as geouser and that works, which means that the ssh connection works.
>
>
> Is the permissions on /var/log/glusterfs/cli.log changed when
> geo-replication is setup?
>
> Is gluster supposed to be in /usr/local/sbin/gluster?
>
>
> Do I have any options or should I remove current geo-replication and
> create a new?
>
> How much do I need to clean up before creating a new geo-replication?
>
> In that case can I pause geo-replication, mount slave cluster on master
> cluster and run rsync , just to speed up transfer of files?
>
>
> Many thanks in advance!
>
> Marcus Pedersén
>
>
> Part from the gsyncd.log:
>
> [2018-07-16 19:34:56.26287] E [syncdutils(worker
> /urd-gds/gluster):749:errlog] Popen: command returned error    cmd=ssh
> -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i
> /var/lib/glusterd/geo-replicatio\
> n/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-WrbZ22/
> bf60c68f1a195dad59573a8dbaa309f2.sock geouser at urd-gds-geo-001
> /nonexistent/gsyncd slave urd-gds-volume geouser at urd-gds-geo-001::urd-
> gds-volu\
> me --master-node urd-gds-001 --master-node-id 912bebfd-1a7f-44dc-b0b7-f001a20d58cd
> --master-brick /urd-gds/gluster --local-node urd-gds-geo-000
> --local-node-id 03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\
> ut 120 --slave-log-level INFO --slave-gluster-log-level INFO
> --slave-gluster-command-dir /usr/local/sbin/ error=1
> [2018-07-16 19:34:56.26583] E [syncdutils(worker
> /urd-gds/gluster):753:logerr] Popen: ssh> failure: execution of
> "/usr/local/sbin/gluster" failed with ENOENT (No such file or directory)
> [2018-07-16 19:34:56.33901] I [repce(agent /urd-gds/gluster):89:service_loop]
> RepceServer: terminating on reaching EOF.
> [2018-07-16 19:34:56.34307] I [monitor(monitor):262:monitor] Monitor:
> worker died before establishing connection        brick=/urd-gds/gluster
> [2018-07-16 19:35:06.59412] I [monitor(monitor):158:monitor] Monitor:
> starting gsyncd worker    brick=/urd-gds/gluster  slave_node=urd-gds-geo-000
> [2018-07-16 19:35:06.99509] I [gsyncd(worker /urd-gds/gluster):297:main]
> <top>: Using session config file       path=/var/lib/glusterd/geo-
> replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
> [2018-07-16 19:35:06.99561] I [gsyncd(agent /urd-gds/gluster):297:main]
> <top>: Using session config file        path=/var/lib/glusterd/geo-
> replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
> [2018-07-16 19:35:06.100481] I [changelogagent(agent
> /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
> [2018-07-16 19:35:06.108834] I [resource(worker /urd-gds/gluster):1348:connect_remote]
> SSH: Initializing SSH connection between master and slave...
> [2018-07-16 19:35:06.762320] E [syncdutils(worker
> /urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is
> broken
> [2018-07-16 19:35:06.763103] E [syncdutils(worker
> /urd-gds/gluster):749:errlog] Popen: command returned error   cmd=ssh
> -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i
> /var/lib/glusterd/geo-replicatio\
> n/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-K9mB6Q/
> bf60c68f1a195dad59573a8dbaa309f2.sock geouser at urd-gds-geo-001
> /nonexistent/gsyncd slave urd-gds-volume geouser at urd-gds-geo-001::urd-
> gds-volu\
> me --master-node urd-gds-001 --master-node-id 912bebfd-1a7f-44dc-b0b7-f001a20d58cd
> --master-brick /urd-gds/gluster --local-node urd-gds-geo-000
> --local-node-id 03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\
> ut 120 --slave-log-level INFO --slave-gluster-log-level INFO
> --slave-gluster-command-dir /usr/local/sbin/ error=1
> [2018-07-16 19:35:06.763398] E [syncdutils(worker
> /urd-gds/gluster):753:logerr] Popen: ssh> failure: execution of
> "/usr/local/sbin/gluster" failed with ENOENT (No such file or directory)
> [2018-07-16 19:35:06.771905] I [repce(agent /urd-gds/gluster):89:service_loop]
> RepceServer: terminating on reaching EOF.
> [2018-07-16 19:35:06.772272] I [monitor(monitor):262:monitor] Monitor:
> worker died before establishing connection       brick=/urd-gds/gluster
> [2018-07-16 19:35:16.786387] I [monitor(monitor):158:monitor] Monitor:
> starting gsyncd worker   brick=/urd-gds/gluster  slave_node=urd-gds-geo-000
> [2018-07-16 19:35:16.828056] I [gsyncd(worker /urd-gds/gluster):297:main]
> <top>: Using session config file      path=/var/lib/glusterd/geo-
> replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
> [2018-07-16 19:35:16.828066] I [gsyncd(agent /urd-gds/gluster):297:main]
> <top>: Using session config file       path=/var/lib/glusterd/geo-
> replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
> [2018-07-16 19:35:16.828912] I [changelogagent(agent
> /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
> [2018-07-16 19:35:16.837100] I [resource(worker /urd-gds/gluster):1348:connect_remote]
> SSH: Initializing SSH connection between master and slave...
> [2018-07-16 19:35:17.260257] E [syncdutils(worker
> /urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is
> broken
>
> ------------------------------
> *Från:* gluster-users-bounces at gluster.org <gluster-users-bounces@
> gluster.org> för Marcus Pedersén <marcus.pedersen at slu.se>
> *Skickat:* den 13 juli 2018 14:50
> *Till:* Kotresh Hiremath Ravishankar
> *Kopia:* gluster-users at gluster.org
> *Ämne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
>
> Hi Kotresh,
> Yes, all nodes have the same version 4.1.1 both master and slave.
> All glusterd are crashing on the master side.
> Will send logs tonight.
>
> Thanks,
> Marcus
>
> ################
> Marcus Pedersén
> Systemadministrator
> Interbull Centre
> ################
> Sent from my phone
> ################
>
> Den 13 juli 2018 11:28 skrev Kotresh Hiremath Ravishankar <
> khiremat at redhat.com>:
>
> Hi Marcus,
>
> Is the gluster geo-rep version is same on both master and slave?
>
> Thanks,
> Kotresh HR
>
> On Fri, Jul 13, 2018 at 1:26 AM, Marcus Pedersén <marcus.pedersen at slu.se>
> wrote:
>
> Hi Kotresh,
>
> i have replaced both files (gsyncdconfig.py
> <https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/gsyncdconfig.py>
> and repce.py
> <https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/repce.py>)
> in all nodes both master and slave.
>
> I rebooted all servers but geo-replication status is still Stopped.
>
> I tried to start geo-replication with response Successful but status still
> show Stopped on all nodes.
>
> Nothing has been written to geo-replication logs since I sent the tail of
> the log.
>
> So I do not know what info to provide?
>
>
> Please, help me to find a way to solve this.
>
>
> Thanks!
>
>
> Regards
>
> Marcus
>
>
> ------------------------------
> *Från:* gluster-users-bounces at gluster.org <gluster-users-bounces at gluster
> .org> för Marcus Pedersén <marcus.pedersen at slu.se>
> *Skickat:* den 12 juli 2018 08:51
> *Till:* Kotresh Hiremath Ravishankar
> *Kopia:* gluster-users at gluster.org
> *Ämne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
>
> Thanks Kotresh,
> I installed through the official centos channel, centos-release-gluster41.
> Isn't this fix included in centos install?
> I will have a look, test it tonight and come back to you!
>
> Thanks a lot!
>
> Regards
> Marcus
>
> ################
> Marcus Pedersén
> Systemadministrator
> Interbull Centre
> ################
> Sent from my phone
> ################
>
> Den 12 juli 2018 07:41 skrev Kotresh Hiremath Ravishankar <
> khiremat at redhat.com>:
>
> Hi Marcus,
>
> I think the fix [1] is needed in 4.1
> Could you please this out and let us know if that works for you?
>
> [1] https://review.gluster.org/#/c/20207/
>
> Thanks,
> Kotresh HR
>
> On Thu, Jul 12, 2018 at 1:49 AM, Marcus Pedersén <marcus.pedersen at slu.se>
> wrote:
>
> Hi all,
>
> I have upgraded from 3.12.9 to 4.1.1 and been following upgrade
> instructions for offline upgrade.
>
> I upgraded geo-replication side first 1 x (2+1) and the master side after
> that 2 x (2+1).
>
> Both clusters works the way they should on their own.
>
> After upgrade on master side status for all geo-replication nodes
> is Stopped.
>
> I tried to start the geo-replication from master node and response back
> was started successfully.
>
> Status again .... Stopped
>
> Tried to start again and get response started successfully, after that all
> glusterd crashed on all master nodes.
>
> After a restart of all glusterd the master cluster was up again.
>
> Status for geo-replication is still Stopped and every try to start it
> after this gives the response successful but still status Stopped.
>
>
> Please help me get the geo-replication up and running again.
>
>
> Best regards
>
> Marcus Pedersén
>
>
> Part of geo-replication log from master node:
>
> [2018-07-11 18:42:48.941760] I [changelogagent(/urd-gds/gluster):73:__init__]
> ChangelogAgent: Agent listining...
> [2018-07-11 18:42:48.947567] I [resource(/urd-gds/gluster):1780:connect_remote]
> SSH: Initializing SSH connection between master and slave...
> [2018-07-11 18:42:49.363514] E [syncdutils(/urd-gds/gluster):304:log_raise_exception]
> <top>: connection to peer is broken
> [2018-07-11 18:42:49.364279] E [resource(/urd-gds/gluster):210:errlog]
> Popen: command returned error    cmd=ssh -oPasswordAuthentication=no
> -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\
> .pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-hjRhBo/7e5
> 534547f3675a710a107722317484f.sock geouser at urd-gds-geo-000
> /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee
> --local-id .%\
> 2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120
> gluster://localhost:urd-gds-volume   error=2
> [2018-07-11 18:42:49.364586] E [resource(/urd-gds/gluster):214:logerr]
> Popen: ssh> usage: gsyncd.py [-h]
> [2018-07-11 18:42:49.364799] E [resource(/urd-gds/gluster):214:logerr]
> Popen: ssh>
> [2018-07-11 18:42:49.364989] E [resource(/urd-gds/gluster):214:logerr]
> Popen: ssh>                  {monitor-status,monitor,worker
> ,agent,slave,status,config-check,config-get,config-set,confi
> g-reset,voluuidget,d\
> elete}
> [2018-07-11 18:42:49.365210] E [resource(/urd-gds/gluster):214:logerr]
> Popen: ssh>                  ...
> [2018-07-11 18:42:49.365408] E [resource(/urd-gds/gluster):214:logerr]
> Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice:
> '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status',
> 'monit\
> or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get',
> 'config-set', 'config-reset', 'voluuidget', 'delete')
> [2018-07-11 18:42:49.365919] I [syncdutils(/urd-gds/gluster):271:finalize]
> <top>: exiting.
> [2018-07-11 18:42:49.369316] I [repce(/urd-gds/gluster):92:service_loop]
> RepceServer: terminating on reaching EOF.
> [2018-07-11 18:42:49.369921] I [syncdutils(/urd-gds/gluster):271:finalize]
> <top>: exiting.
> [2018-07-11 18:42:49.369694] I [monitor(monitor):353:monitor] Monitor:
> worker died before establishing connection       brick=/urd-gds/gluster
> [2018-07-11 18:42:59.492762] I [monitor(monitor):280:monitor] Monitor:
> starting gsyncd worker   brick=/urd-gds/gluster
> slave_node=ssh://geouser@urd-gds-geo-000:gluster://localhost
> :urd-gds-volume
> [2018-07-11 18:42:59.558491] I [resource(/urd-gds/gluster):1780:connect_remote]
> SSH: Initializing SSH connection between master and slave...
> [2018-07-11 18:42:59.559056] I [changelogagent(/urd-gds/gluster):73:__init__]
> ChangelogAgent: Agent listining...
> [2018-07-11 18:42:59.945693] E [syncdutils(/urd-gds/gluster):304:log_raise_exception]
> <top>: connection to peer is broken
> [2018-07-11 18:42:59.946439] E [resource(/urd-gds/gluster):210:errlog]
> Popen: command returned error    cmd=ssh -oPasswordAuthentication=no
> -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\
> .pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-992bk7/7e5
> 534547f3675a710a107722317484f.sock geouser at urd-gds-geo-000
> /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee
> --local-id .%\
> 2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120
> gluster://localhost:urd-gds-volume   error=2
> [2018-07-11 18:42:59.946748] E [resource(/urd-gds/gluster):214:logerr]
> Popen: ssh> usage: gsyncd.py [-h]
> [2018-07-11 18:42:59.946962] E [resource(/urd-gds/gluster):214:logerr]
> Popen: ssh>
> [2018-07-11 18:42:59.947150] E [resource(/urd-gds/gluster):214:logerr]
> Popen: ssh>                  {monitor-status,monitor,worker
> ,agent,slave,status,config-check,config-get,config-set,confi
> g-reset,voluuidget,d\
> elete}
> [2018-07-11 18:42:59.947369] E [resource(/urd-gds/gluster):214:logerr]
> Popen: ssh>                  ...
> [2018-07-11 18:42:59.947552] E [resource(/urd-gds/gluster):214:logerr]
> Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice:
> '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status',
> 'monit\
> or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get',
> 'config-set', 'config-reset', 'voluuidget', 'delete')
> [2018-07-11 18:42:59.948046] I [syncdutils(/urd-gds/gluster):271:finalize]
> <top>: exiting.
> [2018-07-11 18:42:59.951392] I [repce(/urd-gds/gluster):92:service_loop]
> RepceServer: terminating on reaching EOF.
> [2018-07-11 18:42:59.951760] I [syncdutils(/urd-gds/gluster):271:finalize]
> <top>: exiting.
> [2018-07-11 18:42:59.951817] I [monitor(monitor):353:monitor] Monitor:
> worker died before establishing connection       brick=/urd-gds/gluster
> [2018-07-11 18:43:10.54580] I [monitor(monitor):280:monitor] Monitor:
> starting gsyncd worker    brick=/urd-gds/gluster
> slave_node=ssh://geouser@urd-gds-geo-000:gluster://localhost
> :urd-gds-volume
> [2018-07-11 18:43:10.88356] I [monitor(monitor):345:monitor] Monitor:
> Changelog Agent died, Aborting Worker     brick=/urd-gds/gluster
> [2018-07-11 18:43:10.88613] I [monitor(monitor):353:monitor] Monitor:
> worker died before establishing connection        brick=/urd-gds/gluster
> [2018-07-11 18:43:20.112435] I [gsyncdstatus(monitor):242:set_worker_status]
> GeorepStatus: Worker Status Change status=inconsistent
> [2018-07-11 18:43:20.112885] E [syncdutils(monitor):331:log_raise_exception]
> <top>: FAIL:
> Traceback (most recent call last):
>   File "/usr/libexec/glusterfs/python/syncdaemon/syncdutils.py", line
> 361, in twrap
>     except:
>   File "/usr/libexec/glusterfs/python/syncdaemon/monitor.py", line 428,
> in wmon
>     sys.exit()
> TypeError: 'int' object is not iterable
> [2018-07-11 18:43:20.114610] I [syncdutils(monitor):271:finalize] <top>:
> exiting.
>
> ---
> När du skickar e-post till SLU så innebär detta att SLU behandlar dina
> personuppgifter. För att läsa mer om hur detta går till, klicka här
> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
> E-mailing SLU will result in SLU processing your personal data. For more
> information on how this is done, click here
> <https://www.slu.se/en/about-slu/contact-slu/personal-data/>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> https://lists.gluster.org/mailman/listinfo/gluster-users
>
>
>
>
> --
> Thanks and Regards,
> Kotresh H R
>
>
> ---
> När du skickar e-post till SLU så innebär detta att SLU behandlar dina
> personuppgifter. För att läsa mer om hur detta går till, klicka här
> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
> E-mailing SLU will result in SLU processing your personal data. For more
> information on how this is done, click here
> <https://www.slu.se/en/about-slu/contact-slu/personal-data/>
>
> ---
> När du skickar e-post till SLU så innebär detta att SLU behandlar dina
> personuppgifter. För att läsa mer om hur detta går till, klicka här
> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
> E-mailing SLU will result in SLU processing your personal data. For more
> information on how this is done, click here
> <https://www.slu.se/en/about-slu/contact-slu/personal-data/>
>
>
>
>
> --
> Thanks and Regards,
> Kotresh H R
>
>
> ---
> När du skickar e-post till SLU så innebär detta att SLU behandlar dina
> personuppgifter. För att läsa mer om hur detta går till, klicka här
> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
> E-mailing SLU will result in SLU processing your personal data. For more
> information on how this is done, click here
> <https://www.slu.se/en/about-slu/contact-slu/personal-data/>
>
> ---
> När du skickar e-post till SLU så innebär detta att SLU behandlar dina
> personuppgifter. För att läsa mer om hur detta går till, klicka här
> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
> E-mailing SLU will result in SLU processing your personal data. For more
> information on how this is done, click here
> <https://www.slu.se/en/about-slu/contact-slu/personal-data/>
>
> ---
> När du skickar e-post till SLU så innebär detta att SLU behandlar dina
> personuppgifter. För att läsa mer om hur detta går till, klicka här
> <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
> E-mailing SLU will result in SLU processing your personal data. For more
> information on how this is done, click here
> <https://www.slu.se/en/about-slu/contact-slu/personal-data/>
>



-- 
Thanks and Regards,
Kotresh H R
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20180718/2f3ae464/attachment.html>


More information about the Gluster-users mailing list