[Gluster-users] Request for Comments: Upgrades from 3.x to 4.0+

Thu Nov 2 12:10:22 UTC 2017

Hi Amudhan,

Please go through the following that would clarify up-gradation concerns
from DHT to RIO in 4.0

   1. RIO would not deprecate DHT. Both DHT and RIO would co-exist.
   2. DHT volumes would not be migrated to RIO. DHT volumes would still be
   using DHT code.
   3. The new volume creation should specifically opt for RIO volume once
   RIO is in place.
   4. RIO should be perceived as another volume type which is chosed during
   volume creation
   just like replicate, EC which would avoid most of the confusions.

Shaym,

Please add if I am missing anything.

Thanks,
Kotresh HR

On Thu, Nov 2, 2017 at 4:36 PM, Amudhan P <amudhan83 at gmail.com> wrote:

> does RIO improves folder listing and rebalance, when compared to 3.x?
>
> if yes, do you have any performance data comparing RIO and DHT?
>
> On Thu, Nov 2, 2017 at 4:12 PM, Kaushal M <kshlmster at gmail.com> wrote:
>
>> On Thu, Nov 2, 2017 at 4:00 PM, Amudhan P <amudhan83 at gmail.com> wrote:
>> > if doing an upgrade from 3.10.1 to 4.0 or 4.1, will I be able to access
>> > volume without any challenge?
>> >
>> > I am asking this because 4.0 comes with DHT2?
>>
>> Very short answer, yes. Your volumes will remain the same. And you
>> will continue to access them the same way.
>>
>> RIO (as DHT2 is now known as) developers in CC can provide more
>> information on this. But in short, RIO will not be replacing DHT. It
>> was renamed to make this clear.
>> Gluster 4.0 will continue to ship both DHT and RIO. All 3.x volumes
>> that exist will continue to use DHT, and continue to work as they
>> always have.
>> You will only be able to create new RIO volumes, and will not be able
>> to migrate DHT to RIO.
>>
>> >
>> >
>> >
>> >
>> > On Thu, Nov 2, 2017 at 2:26 PM, Kaushal M <kshlmster at gmail.com> wrote:
>> >>
>> >> We're fast approaching the time for Gluster-4.0. And we would like to
>> >> set out the expected upgrade strategy and try to polish it to be as
>> >> user friendly as possible.
>> >>
>> >> We're getting this out here now, because there was quite a bit of
>> >> concern and confusion regarding the upgrades between 3.x and 4.0+.
>> >>
>> >> ---
>> >> ## Background
>> >>
>> >> Gluster-4.0 will bring a newer management daemon, GlusterD-2.0 (GD2),
>> >> which is backwards incompatible with the GlusterD (GD1) in
>> >> GlusterFS-3.1+.  As a hybrid cluster of GD1 and GD2 cannot be
>> >> established, rolling upgrades are not possible. This meant that
>> >> upgrades from 3.x to 4.0 would require a volume downtime and possible
>> >> client downtime.
>> >>
>> >> This was a cause of concern among many during the recently concluded
>> >> Gluster Summit 2017.
>> >>
>> >> We would like to keep pains experienced by our users to a minimum, so
>> >> we are trying to develop an upgrade strategy that avoids downtime as
>> >> much as possible.
>> >>
>> >> ## (Expected) Upgrade strategy from 3.x to 4.0
>> >>
>> >> Gluster-4.0 will ship with both GD1 and GD2.
>> >> For fresh installations, only GD2 will be installed and available by
>> >> default.
>> >> For existing installations (upgrades) GD1 will be installed and run by
>> >> default. GD2 will also be installed simultaneously, but will not run
>> >> automatically.
>> >>
>> >> GD1 will allow rolling upgrades, and allow properly setup Gluster
>> >> volumes to be upgraded to 4.0 binaries, without downtime.
>> >>
>> >> Once the full pool is upgraded, and all bricks and other daemons are
>> >> running 4.0 binaries, migration to GD2 can happen.
>> >>
>> >> To migrate to GD2, all GD1 processes in the cluster need to be killed,
>> >> and GD2 started instead.
>> >> GD2 will not automatically form a cluster. A migration script will be
>> >> provided, which will form a new GD2 cluster from the existing GD1
>> >> cluster information, and migrate volume information from GD1 into GD2.
>> >>
>> >> Once migration is complete, GD2 will pick up the running brick and
>> >> other daemon processes and continue. This will only be possible if the
>> >> rolling upgrade with GD1 happened successfully and all the processes
>> >> are running with 4.0 binaries.
>> >>
>> >> During the whole migration process, the volume would still be online
>> >> for existing clients, who can still continue to work. New clients will
>> >> not be possible during this time.
>> >>
>> >> After migration, existing clients will connect back to GD2 for
>> >> updates. GD2 listens on the same port as GD1 and provides the required
>> >> SunRPC programs.
>> >>
>> >> Once migrated to GD2, rolling upgrades to newer GD2 and Gluster
>> >> versions. without volume downtime, will be possible.
>> >>
>> >> ### FAQ and additional info
>> >>
>> >> #### Both GD1 and GD2? What?
>> >>
>> >> While both GD1 and GD2 will be shipped, the GD1 shipped will
>> >> essentially be the GD1 from the last 3.x series. It will not support
>> >> any of the newer storage or management features being planned for 4.0.
>> >> All new features will only be available from GD2.
>> >>
>> >> #### How long will GD1 be shipped/maintained for?
>> >>
>> >> We plan to maintain GD1 in the 4.x series for at least a couple of
>> >> releases, at least 1 LTM release. Current plan is to maintain it till
>> >> 4.2. Beyond 4.2, users will need to first upgrade from 3.x to 4.2, and
>> >> then upgrade to newer releases.
>> >>
>> >> #### Migration script
>> >>
>> >> The GD1 to GD2 migration script and the required features in GD2 are
>> >> being planned only for 4.1. This would technically mean most users
>> >> will only be able to migrate from 3.x to 4.1. But users can still
>> >> migrate from 3.x to 4.0 with GD1 and get many bug fixes and
>> >> improvements. They would only be missing any new features. Users who
>> >> live on the edge, should be able to the migration manually in 4.0.
>> >>
>> >> ---
>> >>
>> >> Please note that the document above gives the expected upgrade
>> >> strategy, and is not final, nor complete. More details will be added
>> >> and steps will be expanded upon, as we move forward.
>> >>
>> >> To move forward, we need your participation. Please reply to this
>> >> thread with any comments you have. We will try to answer and solve any
>> >> questions or concerns. If there a good new ideas/suggestions, they
>> >> will be integrated. If you just like it as is, let us know any way.
>> >>
>> >> Thanks.
>> >>
>> >> Kaushal and Gluster Developers.
>> >> _______________________________________________
>> >> Gluster-users mailing list
>> >> Gluster-users at gluster.org
>> >> http://lists.gluster.org/mailman/listinfo/gluster-users
>> >
>> >
>>
>
>

-- 
Thanks and Regards,
Kotresh H R
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20171102/4dc46fa7/attachment.html>