[Gluster-users] op-version for reset-brick (Was: Re: [ovirt-users] Upgrading HC from 4.0 to 4.1)

Gianluca Cecchi gianluca.cecchi at gmail.com
Thu Jul 6 06:38:27 UTC 2017


On Thu, Jul 6, 2017 at 6:55 AM, Atin Mukherjee <amukherj at redhat.com> wrote:

>
>
>>
> You can switch back to info mode the moment this is hit one more time with
> the debug log enabled. What I'd need here is the glusterd log (with debug
> mode) to figure out the exact cause of the failure.
>
>
>>
>> Let me know,
>> thanks
>>
>>
>
Yes, but with the volume in the current state I cannot run the reset-brick
command.
I have another volume, named "iso", that I can use, but I would like to use
it as clean after understanding the problem on "export" volume.
Currently on "export" volume in fact  I have this

[root at ovirt01 ~]# gluster volume info export

Volume Name: export
Type: Replicate
Volume ID: b00e5839-becb-47e7-844f-6ce6ce1b7153
Status: Started
Snapshot Count: 0
Number of Bricks: 0 x (2 + 1) = 1
Transport-type: tcp
Bricks:
Brick1: gl01.localdomain.local:/gluster/brick3/export
Options Reconfigured:
...

While on the other two nodes

[root at ovirt02 ~]#  gluster volume info export

Volume Name: export
Type: Replicate
Volume ID: b00e5839-becb-47e7-844f-6ce6ce1b7153
Status: Started
Snapshot Count: 0
Number of Bricks: 0 x (2 + 1) = 2
Transport-type: tcp
Bricks:
Brick1: ovirt02.localdomain.local:/gluster/brick3/export
Brick2: ovirt03.localdomain.local:/gluster/brick3/export
Options Reconfigured:


[root at ovirt03 ~]# gluster volume info export

Volume Name: export
Type: Replicate
Volume ID: b00e5839-becb-47e7-844f-6ce6ce1b7153
Status: Started
Snapshot Count: 0
Number of Bricks: 0 x (2 + 1) = 2
Transport-type: tcp
Bricks:
Brick1: ovirt02.localdomain.local:/gluster/brick3/export
Brick2: ovirt03.localdomain.local:/gluster/brick3/export
Options Reconfigured:
...

Eventually I can destroy and recreate this "export" volume again with the
old names (ovirt0N.localdomain.local) if you give me the sequence of
commands, then enable debug and retry the reset-brick command

Gianluca
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20170706/d3ca3349/attachment.html>


More information about the Gluster-users mailing list