[Gluster-users] Quotas not working after adding arbiter brick to replica 2

[mabi]

Hi Sanoj,
I copied over the quota.conf file from the affected volume (node 1) and opened it up with a hex editor but can not recognize anything really except for the first few header/version bytes. I have attached it within this mail (compressed with bzip2) as requested.
Should I recreate them manually? there where around 10 of them. Or is there a hope of recovering these quotas?
Regards,
M.

> -------- Original Message --------
> Subject: Re: [Gluster-users] Quotas not working after adding arbiter brick to replica 2
> Local Time: August 2, 2017 1:06 PM
> UTC Time: August 2, 2017 11:06 AM
> From: sunnikri at redhat.com
> To: mabi <mabi at protonmail.ch>
> Gluster Users <gluster-users at gluster.org>
>
> Mabi,
> We have fixed a couple of issues in the quota list path.
> Could you also please attach the quota.conf file (/var/lib/glusterd/vols/patchy/quota.conf)
> (Ideally, the first few bytes would be ascii characters followed by 17 bytes per directory on which quota limit is set)
> Regards,
> Sanoj
>
> On Tue, Aug 1, 2017 at 1:36 PM, mabi <mabi at protonmail.ch> wrote:
>
>> I also just noticed quite a few of the following warning messages in the quotad.log log file:
>> [2017-08-01 07:59:27.834202] W [MSGID: 108027] [afr-common.c:2496:afr_discover_done] 0-myvolume-replicate-0: no read subvols for (null)
>>
>>> -------- Original Message --------
>>> Subject: [Gluster-users] Quotas not working after adding arbiter brick to replica 2
>>> Local Time: August 1, 2017 8:49 AM
>>> UTC Time: August 1, 2017 6:49 AM
>>> From: mabi at protonmail.ch
>>> To: Gluster Users <gluster-users at gluster.org>
>>> Hello,
>>> As you might have read in my previous post on the mailing list I have added an arbiter node to my GlusterFS 3.8.11 replica 2 volume. After some healing issues and help of Ravi that could get fixed but now I just noticed that my quotas are all gone.
>>> When I run the following command:
>>> glusterfs volume quota myvolume list
>>> There is no output...
>>> In the /var/log/glusterfs/quotad.log I can see the following two lines when running the list command:
>>> [2017-08-01 06:46:04.451765] W [dict.c:581:dict_unref] (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.8.11/xlator/features/quotad.so(+0x1f3d) [0x7fe868e21f3d] -->/usr/lib/x86_64-linux-gnu/glusterfs/3.8.11/xlator/features/quotad.so(+0x2d82) [0x7fe868e22d82] -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0) [0x7fe86f5c2b10] ) 0-dict: dict is NULL [Invalid argument]
>>> [2017-08-01 06:46:04.459154] W [dict.c:581:dict_unref] (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.8.11/xlator/features/quotad.so(+0x1f3d) [0x7fe868e21f3d] -->/usr/lib/x86_64-linux-gnu/glusterfs/3.8.11/xlator/features/quotad.so(+0x2d82) [0x7fe868e22d82] -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0) [0x7fe86f5c2b10] ) 0-dict: dict is NULL [Invalid argument]
>>> In case you need this info, I have added by arbiter node to the replica 2 by using this command:
>>> gluster volume add-brick myvolume replica 3 arbiter 1 arbiternode.domain.tld:/srv/glusterfs/myvolume/brick
>>> How can I get my quotas back working as before? I had defined around 20 quotas on different directories of that volume.
>>> Regards,
>>> Mabi
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://lists.gluster.org/mailman/listinfo/gluster-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20170802/eaab543f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: quota.conf.bz2
Type: application/x-bzip
Size: 567 bytes
Desc: not available
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20170802/eaab543f/attachment.bin>