[Gluster-users] question about info and info.tmp

songxin songxin_1980 at 126.com
Fri Nov 11 10:30:44 UTC 2016


Hi Atin,



Thank you for your support.
Sincerely wait for your reply.


By the way, could you make sure that the issue, file info is empty, cause by rename is interrupted in kernel?


Thanks,
Xin

在 2016-11-11 15:49:02,"Atin Mukherjee" <amukherj at redhat.com> 写道:





On Fri, Nov 11, 2016 at 1:15 PM, songxin <songxin_1980 at 126.com> wrote:

Hi Atin,
Thank you for your reply.
Actually it is very difficult to reproduce because I don't know when there was an ongoing commit happening.It is just a coincidence.
But I want to make sure the root cause.


I'll give it a another try and see if this situation can be simulated/reproduced and will keep you posted.
 



So I would be grateful if you could answer my questions below.


You said that "This issue is hit at part of the negative testing where while gluster volume set was executed at the same point of time glusterd in another instance was brought down. In the faulty node we could see /var/lib/glusterd/vols/<volname>info file been empty whereas the info.tmp file has the correct contents." in comment.
I have two questions for you.

1.Could you reproduce this issue by gluster volume set glusterd which was brought down?
2.Could you be certain that this issue is cause by rename is interrupted in kernel?
In my case there are two files, info and 10.32.1.144.-opt-lvmdir-c2-brick, are both empty.
But in my view only one rename can be running at the same time because of the big lock.
Why there are two files are empty?


Could rename("info.tmp", "info") and rename("xxx-brick.tmp", "xxx-brick") be running in two thread?
Thanks,
Xin




在 2016-11-11 15:27:03,"Atin Mukherjee" <amukherj at redhat.com> 写道:





On Fri, Nov 11, 2016 at 12:38 PM, songxin <songxin_1980 at 126.com> wrote:



Hi Atin,
Thank you for your reply.


As you said that the info file can only be changed in the glusterd_store_volinfo() sequentially because of the big lock.


I have found the similar issue as below that you mentioned. 
https://bugzilla.redhat.com/show_bug.cgi?id=1308487


Great, so this is what I was actually trying to refer in my first email that I saw a similar issue. Have you got a chance to look at https://bugzilla.redhat.com/show_bug.cgi?id=1308487#c4 ? But in your case, did you try to bring down glusterd when there was an ongoing commit happening?
 



You said that "This issue is hit at part of the negative testing where while gluster volume set was executed at the same point of time glusterd in another instance was brought down. In the faulty node we could see /var/lib/glusterd/vols/<volname>info file been empty whereas the info.tmp file has the correct contents." in comment.
I have two questions for you.

1.Could you reproduce this issue by gluster volume set glusterd which was brought down?
2.Could you be certain that this issue is cause by rename is interrupted in kernel?
In my case there are two files, info and 10.32.1.144.-opt-lvmdir-c2-brick, are both empty.
But in my view only one rename can be running at the same time because of the big lock.
Why there are two files are empty?


Could rename("info.tmp", "info") and rename("xxx-brick.tmp", "xxx-brick") be running in two thread?

Thanks,
Xin




在 2016-11-11 14:36:40,"Atin Mukherjee" <amukherj at redhat.com> 写道:





On Fri, Nov 11, 2016 at 8:33 AM, songxin <songxin_1980 at 126.com> wrote:

Hi Atin,


Thank you for your reply.
I have two questions for you.


1.Are the two files info and info.tmp are only to be created or changed in function glusterd_store_volinfo()? I did not find other point in which the two file are changed.


If we are talking about info file volume then yes, the mentioned function actually takes care of it.
 

2.I found that glusterd_store_volinfo() will be call in many point by glusterd.Is there a problem of thread synchronization?If so, one thread may open a same file info.tmp using O_TRUNC flag when another thread is writing the info,tmp.Could this case happen?


 In glusterd threads are big lock protected and I don't see a possibility (theoretically) to have two glusterd_store_volinfo () calls at a given point of time.
 



Thanks,
Xin



At 2016-11-10 21:41:06, "Atin Mukherjee" <amukherj at redhat.com> wrote:

Did you run out of disk space by any chance? AFAIK, the code is like we write new stuffs to .tmp file and rename it back to the original file. In case of a disk space issue I expect both the files to be of non zero size. But having said that I vaguely remember a similar issue (in the form of a bug or an email) landed up once but we couldn't reproduce it, so something is wrong with the atomic update here is what I guess. I'll be glad if you have a reproducer for the same and then we can dig into it further.



On Thu, Nov 10, 2016 at 1:32 PM, songxin <songxin_1980 at 126.com> wrote:

Hi,
When I start the glusterd some error happened.
And the log is following.

[2016-11-08 07:58:34.989365] I [MSGID: 100030] [glusterfsd.c:2318:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.7.6 (args: /usr/sbin/glusterd -p /var/run/glusterd.pid --log-level INFO) 
[2016-11-08 07:58:34.998356] I [MSGID: 106478] [glusterd.c:1350:init] 0-management: Maximum allowed open file descriptors set to 65536 
[2016-11-08 07:58:35.000667] I [MSGID: 106479] [glusterd.c:1399:init] 0-management: Using /system/glusterd as working directory
[2016-11-08 07:58:35.024508] I [MSGID: 106514] [glusterd-store.c:2075:glusterd_restore_op_version] 0-management: Upgrade detected. Setting op-version to minimum : 1 
[2016-11-08 07:58:35.025356] E [MSGID: 106206] [glusterd-store.c:2562:glusterd_store_update_volinfo] 0-management: Failed to get next store iter 
[2016-11-08 07:58:35.025401] E [MSGID: 106207] [glusterd-store.c:2844:glusterd_store_retrieve_volume] 0-management: Failed to update volinfo for c_glusterfs volume 
[2016-11-08 07:58:35.025463] E [MSGID: 106201] [glusterd-store.c:3042:glusterd_store_retrieve_volumes] 0-management: Unable to restore volume: c_glusterfs 
[2016-11-08 07:58:35.025544] E [MSGID: 101019] [xlator.c:428:xlator_init] 0-management: Initialization of volume 'management' failed, review your volfile again 
[2016-11-08 07:58:35.025582] E [graph.c:322:glusterfs_graph_init] 0-management: initializing translator failed 
[2016-11-08 07:58:35.025629] E [graph.c:661:glusterfs_graph_activate] 0-graph: init failed 
[2016-11-08 07:58:35.026109] W [glusterfsd.c:1236:cleanup_and_exit] (-->/usr/sbin/glusterd(glusterfs_volumes_init-0x1b260) [0x1000a718] -->/usr/sbin/glusterd(glusterfs_process_volfp-0x1b3b8) [0x1000a5a8] -->/usr/sbin/glusterd(cleanup_and_exit-0x1c02c) [0x100098bc] ) 0-: received signum (0), shutting down 




And then I found that the size of vols/volume_name/info is 0.It cause glusterd shutdown.
But I found that vols/volume_name_info.tmp is not 0.
And I found that there is a brick file vols/volume_name/bricks/xxxx.brick is 0, but vols/volume_name/bricks/xxxx.brick.tmp is not 0.


I read the function code glusterd_store_volinfo () in glusterd-store.c .
I know that the info.tmp will be rename to info in function glusterd_store_volume_atomic_update().


But my question is that why the info file is 0 but info.tmp is not 0.




Thanks,
Xin




 


_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users




--



~ Atin (atinm)





 




--



~ Atin (atinm)





 




--



~ Atin (atinm)





 




--



~ Atin (atinm)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20161111/09214bf7/attachment.html>


More information about the Gluster-users mailing list