[Gluster-users] 答复: geo-replication status partial faulty

[Saravanakumar Arumugam]

Hi,

There seems to be some issue in glusterfs01.sh3.ctripcorp.com slave node.
Can you share the complete logs ?

You can increase verbosity of debug messages like this:
gluster volume geo-replication <master volume> <slave host>::<slave 
volume>config log-level DEBUG


Also, check  /root/.ssh/authorized_keys in glusterfs01.sh3.ctripcorp.com
It should have entries in 
/var/lib/glusterd/geo-replication/common_secret.pem.pub (present in 
master node).

Have a look at this one for example:
https://www.gluster.org/pipermail/gluster-users/2015-August/023174.html

Thanks,
Saravana

On 05/19/2016 07:53 AM, vyyy杨雨阳 wrote:
>
> Hello,
>
> I have tried to config a geo-replication volume , all the master nodes 
> configuration are the same, When I start this volume, the status shows 
> partial faulty as following:
>
> gluster volume geo-replication filews 
> glusterfs01.sh3.ctripcorp.com::filews_slave status
>
> MASTER NODE      MASTER VOL    MASTER BRICK          SLAVE STATUS     
> CHECKPOINT STATUS    CRAWL STATUS
>
> -------------------------------------------------------------------------------------------------------------------------------------------------
>
> SVR8048HW2285    filews /export/sdb/filews 
> glusterfs01.sh3.ctripcorp.com::filews_slave    faulty 
> N/A                  N/A
>
> SVR8050HW2285    filews /export/sdb/filews 
> glusterfs03.sh3.ctripcorp.com::filews_slave    Passive 
> N/A                  N/A
>
> SVR8047HW2285    filews /export/sdb/filews 
> glusterfs01.sh3.ctripcorp.com::filews_slave    Active 
> N/A                  Hybrid Crawl
>
> SVR8049HW2285    filews /export/sdb/filews 
> glusterfs05.sh3.ctripcorp.com::filews_slave    Active 
> N/A                  Hybrid Crawl
>
> SH02SVR5951      filews /export/sdb/brick1 
> glusterfs06.sh3.ctripcorp.com::filews_slave    Passive 
> N/A                  N/A
>
> SH02SVR5953      filews /export/sdb/brick1 
> glusterfs01.sh3.ctripcorp.com::filews_slave    faulty 
> N/A                  N/A
>
> SVR6995HW2285    filews /export/sdb/filews 
> glusterfs01.sh3.ctripcorp.com::filews_slave    faulty 
> N/A                  N/A
>
> SH02SVR5954      filews /export/sdb/brick1 
> glusterfs01.sh3.ctripcorp.com::filews_slave    faulty 
>   N/A                  N/A
>
> SVR6994HW2285    filews /export/sdb/filews 
> glusterfs02.sh3.ctripcorp.com::filews_slave    Passive 
> N/A                  N/A
>
> SVR6993HW2285    filews /export/sdb/filews 
> glusterfs01.sh3.ctripcorp.com::filews_slave    faulty 
> N/A                  N/A
>
> SH02SVR5952      filews /export/sdb/brick1 
> glusterfs01.sh3.ctripcorp.com::filews_slave    faulty 
> N/A                  N/A
>
> SVR6996HW2285    filews /export/sdb/filews 
> glusterfs04.sh3.ctripcorp.com::filews_slave    Passive 
> N/A                  N/A
>
> On the faulty node, log file /var/log/glusterfs/geo-replication/filews 
> shows worker(/export/sdb/filews) died before establishing connection
>
> [2016-05-18 16:55:46.402622] I [monitor(monitor):215:monitor] Monitor: 
> ------------------------------------------------------------
>
> [2016-05-18 16:55:46.402930] I [monitor(monitor):216:monitor] Monitor: 
> starting gsyncd worker
>
> [2016-05-18 16:55:46.517460] I [changelogagent(agent):72:__init__] 
> ChangelogAgent: Agent listining...
>
> [2016-05-18 16:55:46.518066] I [repce(agent):92:service_loop] 
> RepceServer: terminating on reaching EOF.
>
> [2016-05-18 16:55:46.518279] I [syncdutils(agent):214:finalize] <top>: 
> exiting.
>
> [2016-05-18 16:55:46.518194] I [monitor(monitor):267:monitor] Monitor: 
> worker(/export/sdb/filews) died before establishing connection
>
> [2016-05-18 16:55:56.697036] I [monitor(monitor):215:monitor] Monitor: 
> ------------------------------------------------------------
>
> Any advice and suggestions will be greatly appreciated.
>
> Best Regards **
>
> *������**Yuyang Yang***
>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160519/5d7bd597/attachment.html>