[Gluster-users] [Gluster-devel] Messup with peer status!!
Atin Mukherjee
amukherj at redhat.com
Mon Mar 14 11:57:49 UTC 2016
On 03/14/2016 05:09 PM, ABHISHEK PALIWAL wrote:
> I am not getting you which glusterd directory you are asking. if you are
> asking about the /var/lib/glusterd directory then which I shared earlier
> is the same.
1. Go to /var/log/glusterfs directory
2. Look for glusterd log file
3. attach the log
Do it for both the boards.
>
> I have two directories related to gluster
>
> 1. /var/log/glusterfs
> 2./var/lib/glusterd
>
> On Mon, Mar 14, 2016 at 4:12 PM, Atin Mukherjee <amukherj at redhat.com
> <mailto:amukherj at redhat.com>> wrote:
>
>
>
> On 03/14/2016 03:59 PM, ABHISHEK PALIWAL wrote:
> > I have only these glusterd files available on the nodes
> Look for etc-*-glusterd*.log in /var/log/glusterfs, that represents the
> glusterd log file.
> >
> > Regards,
> > Abhishek
> >
> > On Mon, Mar 14, 2016 at 3:43 PM, Atin Mukherjee <amukherj at redhat.com <mailto:amukherj at redhat.com>
> > <mailto:amukherj at redhat.com <mailto:amukherj at redhat.com>>> wrote:
> >
> >
> >
> > On 03/14/2016 02:18 PM, ABHISHEK PALIWAL wrote:
> > >
> > >
> > > On Mon, Mar 14, 2016 at 12:12 PM, Atin Mukherjee <amukherj at redhat.com <mailto:amukherj at redhat.com>
> <mailto:amukherj at redhat.com <mailto:amukherj at redhat.com>>
> > > <mailto:amukherj at redhat.com <mailto:amukherj at redhat.com>
> <mailto:amukherj at redhat.com <mailto:amukherj at redhat.com>>>> wrote:
> > >
> > >
> > >
> > > On 03/14/2016 10:52 AM, ABHISHEK PALIWAL wrote:
> > > > Hi Team,
> > > >
> > > > I am facing some issue with peer status and because of
> that
> > remove-brick
> > > > on replica volume is getting failed.
> > > >
> > > > Here. is the scenario what I am doing with gluster:
> > > >
> > > > 1. I have two boards A & B and gluster is running on
> both of
> > the boards.
> > > > 2. On board I have created a replicated volume with one
> > brick on each
> > > > board.
> > > > 3. Created one glusterfs mount point where both of
> brick are
> > mounted.
> > > > 4. start the volume with nfs.disable=true.
> > > > 5. Till now everything is in sync between both of bricks.
> > > >
> > > > Now when I manually plug-out the board B from the slot and
> > plug-in it again.
> > > >
> > > > 1. After bootup the board B I have started the glusted on
> > the board B.
> > > >
> > > > Following are the some gluster command output on Board B
> > after the step 1.
> > > >
> > > > # gluster peer status
> > > > Number of Peers: 2
> > > >
> > > > Hostname: 10.32.0.48
> > > > Uuid: f4ebe3c5-b6a4-4795-98e0-732337f76faf
> > > > State: Accepted peer request (Connected)
> > > >
> > > > Hostname: 10.32.0.48
> > > > Uuid: 4bf982c0-b21b-415c-b870-e72f36c7f2e7
> > > > State: Peer is connected and Accepted (Connected)
> > > >
> > > > Why this peer status is showing two peer with
> different UUID?
> > > GlusterD doesn't generate a new UUID on init if it has
> already
> > generated
> > > an UUID earlier. This clearly indicates that on reboot
> of board B
> > > content of /var/lib/glusterd were wiped off. I've asked this
> > question to
> > > you multiple times that is it the case?
> > >
> > >
> > > Yes I am following the same which is mentioned in the link:
> > >
> > >
> >
> http://www.gluster.org/community/documentation/index.php/Resolving_Peer_Rejected
> > >
> > > but why it is showing two peer enteries?
> > >
> > > >
> > > > # gluster volume info
> > > >
> > > > Volume Name: c_glusterfs
> > > > Type: Replicate
> > > > Volume ID: c11f1f13-64a0-4aca-98b5-91d609a4a18d
> > > > Status: Started
> > > > Number of Bricks: 1 x 2 = 2
> > > > Transport-type: tcp
> > > > Bricks:
> > > > Brick1: 10.32.0.48:/opt/lvmdir/c2/brick
> > > > Brick2: 10.32.1.144:/opt/lvmdir/c2/brick
> > > > Options Reconfigured:
> > > > performance.readdir-ahead: on
> > > > network.ping-timeout: 4
> > > > nfs.disable: on
> > > > # gluster volume heal c_glusterfs info
> > > > c_glusterfs: Not able to fetch volfile from glusterd
> > > > Volume heal failed.
> > > > # gluster volume status c_glusterfs
> > > > Status of volume: c_glusterfs
> > > > Gluster process TCP Port
> RDMA Port
> > > Online
> > > > Pid
> > > >
> > >
> >
> ------------------------------------------------------------------------------
> > > >
> > > > Brick 10.32.1.144:/opt/lvmdir/c2/brick N/A N/A
> > N
> > > > N/A
> > > > Self-heal Daemon on localhost N/A N/A
> > Y
> > > > 3922
> > > >
> > > > Task Status of Volume c_glusterfs
> > > >
> > >
> >
> ------------------------------------------------------------------------------
> > > >
> > > > There are no active volume tasks
> > > > --
> > > >
> > > > At the same time Board A have the following gluster
> commands
> > outcome:
> > > >
> > > > # gluster peer status
> > > > Number of Peers: 1
> > > >
> > > > Hostname: 10.32.1.144
> > > > Uuid: c6b64e36-76da-4e98-a616-48e0e52c7006
> > > > State: Peer in Cluster (Connected)
> > > >
> > > > Why it is showing the older UUID of host 10.32.1.144
> when this
> > > UUID has
> > > > been changed and new UUID is
> > 267a92c3-fd28-4811-903c-c1d54854bda9
> > > >
> > > >
> > > > # gluster volume heal c_glusterfs info
> > > > c_glusterfs: Not able to fetch volfile from glusterd
> > > > Volume heal failed.
> > > > # gluster volume status c_glusterfs
> > > > Status of volume: c_glusterfs
> > > > Gluster process TCP Port
> RDMA Port
> > > Online
> > > > Pid
> > > >
> > >
> >
> ------------------------------------------------------------------------------
> > > >
> > > > Brick 10.32.0.48:/opt/lvmdir/c2/brick 49169 0
> > Y
> > > > 2427
> > > > Brick 10.32.1.144:/opt/lvmdir/c2/brick N/A N/A
> > N
> > > > N/A
> > > > Self-heal Daemon on localhost N/A N/A
> > Y
> > > > 3388
> > > > Self-heal Daemon on 10.32.1.144 N/A N/A
> > Y
> > > > 3922
> > > >
> > > > Task Status of Volume c_glusterfs
> > > >
> > >
> >
> ------------------------------------------------------------------------------
> > > >
> > > > There are no active volume tasks
> > > >
> > > > As you see in the "gluster volume status" showing that
> Brick
> > > > "10.32.1.144:/opt/lvmdir/c2/brick " is offline so We have
> > tried to
> > > > remove it but getting "volume remove-brick c_glusterfs
> replica 1
> > > > 10.32.1.144:/opt/lvmdir/c2/brick force : FAILED :
> Incorrect
> > brick
> > > > 10.32.1.144:/opt/lvmdir/c2/brick for volume c_glusterfs"
> > error on the
> > > > Board A.
> > > >
> > > > Please reply on this post because I am always getting
> this error
> > > in this
> > > > scenario.
> > > >
> > > > For more detail I am also adding the logs of both of the
> > board which
> > > > having some manual created file in which you can find the
> > output of
> > > > glulster command from both of the boards
> > > >
> > > > in logs
> > > > 00030 is board A
> > > > 00250 is board B.
> > > This attachment doesn't help much. Could you attach full
> > glusterd log
> > > files from both the nodes?
> > > >
> > >
> > > inside this attachment you will found full glusterd log file
> > > 00300/glusterd/ and 002500/glusterd/
> > No, that contains the configuration files.
> > >
> > > > Thanks in advance waiting for the reply.
> > > >
> > > > Regards,
> > > > Abhishek
> > > >
> > > >
> > > > Regards
> > > > Abhishek Paliwal
> > > >
> > > >
> > > > _______________________________________________
> > > > Gluster-devel mailing list
> > > > Gluster-devel at gluster.org
> <mailto:Gluster-devel at gluster.org> <mailto:Gluster-devel at gluster.org
> <mailto:Gluster-devel at gluster.org>>
> > <mailto:Gluster-devel at gluster.org
> <mailto:Gluster-devel at gluster.org> <mailto:Gluster-devel at gluster.org
> <mailto:Gluster-devel at gluster.org>>>
> > > > http://www.gluster.org/mailman/listinfo/gluster-devel
> > > >
> > >
> > >
> > >
> > >
> > > --
> > >
> > >
> > >
> > >
> > > Regards
> > > Abhishek Paliwal
> >
> >
> >
> >
> > --
> >
> >
> >
> >
> > Regards
> > Abhishek Paliwal
>
>
>
>
> --
>
>
>
>
> Regards
> Abhishek Paliwal
More information about the Gluster-users
mailing list