[Gluster-users] GlusterFS on FreeBSD
Kyle Johnson
kjohnson at gnulnx.net
Fri Jul 15 05:11:42 UTC 2016
BTW, here's the bug: https://bugzilla.redhat.com/show_bug.cgi?id=1356076
On 07/14/2016 08:28 PM, Angelo Rivera wrote:
> Hello,
>
> Thank you very much for your response this really is a big help on my
> side, since I'm only starting to study glusterfs on freebsd. I'm
> running 4 FreeBSD 10.2 server with 50GB space each.
>
> On 14/07/2016 1:33 PM, Kyle Johnson wrote:
>> Installed, yes. Properly? Kind of.
>>
>> I'm running gluster 3.7.6 with a two-node distributed volume between
>> a centos and a freebsd peer.
>>
>> There is currently a bug where gluster on freebsd is not able to
>> correctly determine file system information. That is, on my freebsd
>> peer with ~40T of storage, gluster is reporting 12.6PB of storage.
>> As gluster believes this server has (far) more available storage, it
>> sends most of the data on a volume to the brick(s) on that server.
>>
>> This causes the disk space on the freebsd server to fill up well
>> before the other server does.
>>
>> $ sudo gluster volume status ftp detail
>> Status of volume: ftp
>> ------------------------------------------------------------------------------
>>
>> Brick : Brick 192.168.110.1:/tank/bricks/ftp
>> TCP Port : 49159
>> RDMA Port : 0
>> Online : Y
>> Pid : 69547
>> Disk Space Free : 2.5PB
>> Total Disk Space : 12.6PB
>> Inode Count : 21097221251
>> Free Inodes : 21087351972
>> ------------------------------------------------------------------------------
>>
>> Brick : Brick 192.168.110.2:/ftp/bricks/ftp
>> TCP Port : 49152
>> RDMA Port : 0
>> Online : Y
>> Pid : 1087
>> Disk Space Free : 39.3TB
>> Total Disk Space : 46.3TB
>> Inode Count : 84298676694
>> Free Inodes : 84297712404
>>
>> $ zfs list -r tank
>> NAME USED AVAIL REFER MOUNTPOINT
>> tank 40.5T 9.82T 153K /tank
>> tank/bricks 40.5T 9.82T 40.5T /tank/bricks
>>
>>
>> My temporary workaround is to disable weighted-rebalance:
>>
>> [kyle at colossus ~]$ sudo gluster volume set ftp
>> cluster.weighted-rebalance off
>>
>> I haven't tested this on any other freebsd boxes, nor have I tested
>> other types of volumes (e.g. replicated).
>>
>> In addition, I wasn't able to get the gluster fuse mount to work on
>> freebsd, though I did not try very hard.
>>
>> As for the install: $ sudo pkg install glusterfs
>>
>> Hope this helps,
>
More information about the Gluster-users
mailing list