[Gluster-users] New cluster - first experience
Gandalf Corvotempesta
gandalf.corvotempesta at gmail.com
Mon Jul 11 17:31:11 UTC 2016
2016-07-11 19:23 GMT+02:00, Gandalf Corvotempesta
<gandalf.corvotempesta at gmail.com>:
> 2016-07-11 18:52 GMT+02:00, Alastair Neil <ajneil.tech at gmail.com>:
>> what performance do you see with the dd directly to the bricks?
>
> # echo 3 > /proc/sys/vm/drop_caches; dd if=/dev/zero of=test bs=1M
> count=1000 conv=fsync
> 1000+0 records in
> 1000+0 records out
> 1048576000 bytes (1.0 GB) copied, 8.20727 s, 128 MB/s
>
> # echo 3 > /proc/sys/vm/drop_caches; dd if=/dev/zero of=test bs=1M
> count=1000 conv=fsync
> 1000+0 records in
> 1000+0 records out
> 1048576000 bytes (1.0 GB) copied, 8.24893 s, 127 MB/s
>
> # echo 3 > /proc/sys/vm/drop_caches; dd if=/dev/zero of=test bs=1M
> count=1000 conv=fsync
> 1000+0 records in
> 1000+0 records out
> 1048576000 bytes (1.0 GB) copied, 8.64035 s, 121 MB/s
>
> # echo 3 > /proc/sys/vm/drop_caches; dd if=/dev/zero of=test bs=1M
> count=1000 conv=fsync
> 1000+0 records in
> 1000+0 records out
> 1048576000 bytes (1.0 GB) copied, 8.29078 s, 126 MB/s
>
> # echo 3 > /proc/sys/vm/drop_caches; dd if=/dev/zero of=test bs=1M
> count=1000 conv=fsync
> 1000+0 records in
> 1000+0 records out
> 1048576000 bytes (1.0 GB) copied, 8.28962 s, 126 MB/s
>
This is the same but from the client, using the gluster volume.
# echo 3 > /proc/sys/vm/drop_caches; dd if=/dev/zero of=test bs=1M
count=1000 conv=fsync
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 111.786 s, 9.4 MB/s
9.4MB/s = 75mbit
As I'm using replica 3, 75mbit*3 = 225mbit of aggregated bandwidth.
I think it's too low on a gigabit network.
Each disks on each node is able to saturate the network, so I would
expect about 950mbit when writing in parallel to 3 nodes. I'm reaching
1/4 of available speed.
More information about the Gluster-users
mailing list