[Gluster-users] [Gluster-devel] GlusterFS FUSE client hangs on rsyncing lots of file

baul jianguo roidinev at gmail.com
Thu Jan 28 09:29:31 UTC 2016


http://pastebin.centos.org/38941/
client statedump,only the pid 27419,168030,208655 hang,you can search
this pid in the statedump file。

On Wed, Jan 27, 2016 at 4:35 PM, Pranith Kumar Karampuri
<pkarampu at redhat.com> wrote:
> Hi,
>       If the hang appears on enabling client side io-threads then it could
> be because of some race that is seen when io-threads is enabled on the
> client side. 2 things will help us debug this issue:
> 1) thread apply all bt inside gdb (with debuginfo rpms/debs installed )
> 2) Complete statedump of the mount at two intervals preferably 10 seconds
> apart. It becomes difficult to find out which ones are stuck vs the ones
> that are on-going when we have just one statedump. If we have two, we can
> find which frames are common in both of the statedumps and then take a
> closer look there.
>
> Feel free to ping me on #gluster-dev, nick: pranithk if you have the process
> hung in that state and you guys don't mind me do a live debugging with you
> guys. This option is the best of the lot!
>
> Thanks a lot baul, Oleksandr for the debugging so far!
>
> Pranith
>
>
> On 01/25/2016 01:03 PM, baul jianguo wrote:
>>
>> 3.5.7 also hangs.only the flush op hung. Yes,off the
>> performance.client-io-threads ,no hang.
>>
>> The hang does not relate the client kernel version.
>>
>> One client statdump about flush op,any abnormal?
>>
>> [global.callpool.stack.12]
>>
>> uid=0
>>
>> gid=0
>>
>> pid=14432
>>
>> unique=16336007098
>>
>> lk-owner=77cb199aa36f3641
>>
>> op=FLUSH
>>
>> type=1
>>
>> cnt=6
>>
>>
>>
>> [global.callpool.stack.12.frame.1]
>>
>> ref_count=1
>>
>> translator=fuse
>>
>> complete=0
>>
>>
>>
>> [global.callpool.stack.12.frame.2]
>>
>> ref_count=0
>>
>> translator=datavolume-write-behind
>>
>> complete=0
>>
>> parent=datavolume-read-ahead
>>
>> wind_from=ra_flush
>>
>> wind_to=FIRST_CHILD (this)->fops->flush
>>
>> unwind_to=ra_flush_cbk
>>
>>
>>
>> [global.callpool.stack.12.frame.3]
>>
>> ref_count=1
>>
>> translator=datavolume-read-ahead
>>
>> complete=0
>>
>> parent=datavolume-open-behind
>>
>> wind_from=default_flush_resume
>>
>> wind_to=FIRST_CHILD(this)->fops->flush
>>
>> unwind_to=default_flush_cbk
>>
>>
>>
>> [global.callpool.stack.12.frame.4]
>>
>> ref_count=1
>>
>> translator=datavolume-open-behind
>>
>> complete=0
>>
>> parent=datavolume-io-threads
>>
>> wind_from=iot_flush_wrapper
>>
>> wind_to=FIRST_CHILD(this)->fops->flush
>>
>> unwind_to=iot_flush_cbk
>>
>>
>>
>> [global.callpool.stack.12.frame.5]
>>
>> ref_count=1
>>
>> translator=datavolume-io-threads
>>
>> complete=0
>>
>> parent=datavolume
>>
>> wind_from=io_stats_flush
>>
>> wind_to=FIRST_CHILD(this)->fops->flush
>>
>> unwind_to=io_stats_flush_cbk
>>
>>
>>
>> [global.callpool.stack.12.frame.6]
>>
>> ref_count=1
>>
>> translator=datavolume
>>
>> complete=0
>>
>> parent=fuse
>>
>> wind_from=fuse_flush_resume
>>
>> wind_to=xl->fops->flush
>>
>> unwind_to=fuse_err_cbk
>>
>>
>>
>> On Sun, Jan 24, 2016 at 5:35 AM, Oleksandr Natalenko
>> <oleksandr at natalenko.name> wrote:
>>>
>>> With "performance.client-io-threads" set to "off" no hangs occurred in 3
>>> rsync/rm rounds. Could that be some fuse-bridge lock race? Will bring
>>> that
>>> option to "on" back again and try to get full statedump.
>>>
>>> On четвер, 21 січня 2016 р. 14:54:47 EET Raghavendra G wrote:
>>>>
>>>> On Thu, Jan 21, 2016 at 10:49 AM, Pranith Kumar Karampuri <
>>>>
>>>> pkarampu at redhat.com> wrote:
>>>>>
>>>>> On 01/18/2016 02:28 PM, Oleksandr Natalenko wrote:
>>>>>>
>>>>>> XFS. Server side works OK, I'm able to mount volume again. Brick is
>>>>>> 30%
>>>>>> full.
>>>>>
>>>>> Oleksandr,
>>>>>
>>>>>        Will it be possible to get the statedump of the client, bricks
>>>>>
>>>>> output next time it happens?
>>>>>
>>>>>
>>>>> https://github.com/gluster/glusterfs/blob/master/doc/debugging/statedump.m
>>>>> d#how-to-generate-statedump
>>>>
>>>> We also need to dump inode information. To do that you've to add
>>>> "all=yes"
>>>> to /var/run/gluster/glusterdump.options before you issue commands to get
>>>> statedump.
>>>>
>>>>> Pranith
>>>>>
>>>>>> On понеділок, 18 січня 2016 р. 15:07:18 EET baul jianguo wrote:
>>>>>>>
>>>>>>> What is your brick file system? and the glusterfsd process and all
>>>>>>> thread status?
>>>>>>> I met same issue when client app such as rsync stay in D status,and
>>>>>>> the brick process and relate thread also be in the D status.
>>>>>>> And the brick dev disk util is 100% .
>>>>>>>
>>>>>>> On Sun, Jan 17, 2016 at 6:13 AM, Oleksandr Natalenko
>>>>>>>
>>>>>>> <oleksandr at natalenko.name> wrote:
>>>>>>>>
>>>>>>>> Wrong assumption, rsync hung again.
>>>>>>>>
>>>>>>>> On субота, 16 січня 2016 р. 22:53:04 EET Oleksandr Natalenko wrote:
>>>>>>>>>
>>>>>>>>> One possible reason:
>>>>>>>>>
>>>>>>>>> cluster.lookup-optimize: on
>>>>>>>>> cluster.readdir-optimize: on
>>>>>>>>>
>>>>>>>>> I've disabled both optimizations, and at least as of now rsync
>>>>>>>>> still
>>>>>>>>> does
>>>>>>>>> its job with no issues. I would like to find out what option causes
>>>>>>>>> such
>>>>>>>>> a
>>>>>>>>> behavior and why. Will test more.
>>>>>>>>>
>>>>>>>>> On пʼятниця, 15 січня 2016 р. 16:09:51 EET Oleksandr Natalenko
>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Another observation: if rsyncing is resumed after hang, rsync
>>>>>>>>>> itself
>>>>>>>>>> hangs a lot faster because it does stat of already copied files.
>>>>>>>>>> So,
>>>>>>>>>> the
>>>>>>>>>> reason may be not writing itself, but massive stat on GlusterFS
>>>>>>>>>> volume
>>>>>>>>>> as well.
>>>>>>>>>>
>>>>>>>>>> 15.01.2016 09:40, Oleksandr Natalenko написав:
>>>>>>>>>>>
>>>>>>>>>>> While doing rsync over millions of files from ordinary partition
>>>>>>>>>>> to
>>>>>>>>>>> GlusterFS volume, just after approx. first 2 million rsync hang
>>>>>>>>>>> happens, and the following info appears in dmesg:
>>>>>>>>>>>
>>>>>>>>>>> ===
>>>>>>>>>>> [17075038.924481] INFO: task rsync:10310 blocked for more than
>>>>>>>>>>> 120
>>>>>>>>>>> seconds.
>>>>>>>>>>> [17075038.931948] "echo 0 >
>>>>>>>>>>> /proc/sys/kernel/hung_task_timeout_secs"
>>>>>>>>>>> disables this message.
>>>>>>>>>>> [17075038.940748] rsync           D ffff88207fc13680     0 10310
>>>>>>>>>>> 10309 0x00000080
>>>>>>>>>>> [17075038.940752]  ffff8809c578be18 0000000000000086
>>>>>>>>>>> ffff8809c578bfd8
>>>>>>>>>>> 0000000000013680
>>>>>>>>>>> [17075038.940756]  ffff8809c578bfd8 0000000000013680
>>>>>>>>>>> ffff880310cbe660
>>>>>>>>>>> ffff881159d16a30
>>>>>>>>>>> [17075038.940759]  ffff881e3aa25800 ffff8809c578be48
>>>>>>>>>>> ffff881159d16b10
>>>>>>>>>>> ffff88087d553980
>>>>>>>>>>> [17075038.940762] Call Trace:
>>>>>>>>>>> [17075038.940770]  [<ffffffff8160a1d9>] schedule+0x29/0x70
>>>>>>>>>>> [17075038.940797]  [<ffffffffa023a53d>]
>>>>>>>>>>> __fuse_request_send+0x13d/0x2c0
>>>>>>>>>>> [fuse]
>>>>>>>>>>> [17075038.940801]  [<ffffffffa023db30>] ?
>>>>>>>>>>> fuse_get_req_nofail_nopages+0xc0/0x1e0 [fuse]
>>>>>>>>>>> [17075038.940805]  [<ffffffff81098350>] ? wake_up_bit+0x30/0x30
>>>>>>>>>>> [17075038.940809]  [<ffffffffa023a6d2>]
>>>>>>>>>>> fuse_request_send+0x12/0x20
>>>>>>>>>>> [fuse]
>>>>>>>>>>> [17075038.940813]  [<ffffffffa024382f>] fuse_flush+0xff/0x150
>>>>>>>>>>> [fuse]
>>>>>>>>>>> [17075038.940817]  [<ffffffff811c45c4>] filp_close+0x34/0x80
>>>>>>>>>>> [17075038.940821]  [<ffffffff811e4ed8>] __close_fd+0x78/0xa0
>>>>>>>>>>> [17075038.940824]  [<ffffffff811c6103>] SyS_close+0x23/0x50
>>>>>>>>>>> [17075038.940828]  [<ffffffff81614de9>]
>>>>>>>>>>> system_call_fastpath+0x16/0x1b
>>>>>>>>>>> ===
>>>>>>>>>>>
>>>>>>>>>>> rsync blocks in D state, and to kill it, I have to do umount
>>>>>>>>>>> --lazy
>>>>>>>>>>> on
>>>>>>>>>>> GlusterFS mountpoint, and then kill corresponding client
>>>>>>>>>>> glusterfs
>>>>>>>>>>> process. Then rsync exits.
>>>>>>>>>>>
>>>>>>>>>>> Here is GlusterFS volume info:
>>>>>>>>>>>
>>>>>>>>>>> ===
>>>>>>>>>>> Volume Name: asterisk_records
>>>>>>>>>>> Type: Distributed-Replicate
>>>>>>>>>>> Volume ID: dc1fe561-fa3a-4f2e-8330-ec7e52c75ba4
>>>>>>>>>>> Status: Started
>>>>>>>>>>> Number of Bricks: 3 x 2 = 6
>>>>>>>>>>> Transport-type: tcp
>>>>>>>>>>> Bricks:
>>>>>>>>>>> Brick1:
>>>>>>>>>>>
>>>>>>>>>>> server1:/bricks/10_megaraid_0_3_9_x_0_4_3_hdd_r1_nolvm_hdd_storage_0
>>>>>>>>>>> 1
>>>>>>>>>>> /as
>>>>>>>>>>> te
>>>>>>>>>>> risk/records Brick2:
>>>>>>>>>>>
>>>>>>>>>>> server2:/bricks/10_megaraid_8_5_14_x_8_6_16_hdd_r1_nolvm_hdd_storage
>>>>>>>>>>> _
>>>>>>>>>>> 01/
>>>>>>>>>>> as
>>>>>>>>>>> terisk/records Brick3:
>>>>>>>>>>>
>>>>>>>>>>> server1:/bricks/11_megaraid_0_5_4_x_0_6_5_hdd_r1_nolvm_hdd_storage_0
>>>>>>>>>>> 2
>>>>>>>>>>> /as
>>>>>>>>>>> te
>>>>>>>>>>> risk/records Brick4:
>>>>>>>>>>>
>>>>>>>>>>> server2:/bricks/11_megaraid_8_7_15_x_8_8_20_hdd_r1_nolvm_hdd_storage
>>>>>>>>>>> _
>>>>>>>>>>> 02/
>>>>>>>>>>> as
>>>>>>>>>>> terisk/records Brick5:
>>>>>>>>>>>
>>>>>>>>>>> server1:/bricks/12_megaraid_0_7_6_x_0_13_14_hdd_r1_nolvm_hdd_storage
>>>>>>>>>>> _
>>>>>>>>>>> 03/
>>>>>>>>>>> as
>>>>>>>>>>> terisk/records Brick6:
>>>>>>>>>>>
>>>>>>>>>>> server2:/bricks/12_megaraid_8_9_19_x_8_13_24_hdd_r1_nolvm_hdd_storag
>>>>>>>>>>> e
>>>>>>>>>>> _03
>>>>>>>>>>> /a
>>>>>>>>>>> sterisk/records Options Reconfigured:
>>>>>>>>>>> cluster.lookup-optimize: on
>>>>>>>>>>> cluster.readdir-optimize: on
>>>>>>>>>>> client.event-threads: 2
>>>>>>>>>>> network.inode-lru-limit: 4096
>>>>>>>>>>> server.event-threads: 4
>>>>>>>>>>> performance.client-io-threads: on
>>>>>>>>>>> storage.linux-aio: on
>>>>>>>>>>> performance.write-behind-window-size: 4194304
>>>>>>>>>>> performance.stat-prefetch: on
>>>>>>>>>>> performance.quick-read: on
>>>>>>>>>>> performance.read-ahead: on
>>>>>>>>>>> performance.flush-behind: on
>>>>>>>>>>> performance.write-behind: on
>>>>>>>>>>> performance.io-thread-count: 2
>>>>>>>>>>> performance.cache-max-file-size: 1048576
>>>>>>>>>>> performance.cache-size: 33554432
>>>>>>>>>>> features.cache-invalidation: on
>>>>>>>>>>> performance.readdir-ahead: on
>>>>>>>>>>> ===
>>>>>>>>>>>
>>>>>>>>>>> The issue reproduces each time I rsync such an amount of files.
>>>>>>>>>>>
>>>>>>>>>>> How could I debug this issue better?
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Gluster-users mailing list
>>>>>>>>>>> Gluster-users at gluster.org
>>>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Gluster-devel mailing list
>>>>>>>>>> Gluster-devel at gluster.org
>>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Gluster-devel mailing list
>>>>>>>>> Gluster-devel at gluster.org
>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Gluster-devel mailing list
>>>>>>>> Gluster-devel at gluster.org
>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>>>>>
>>>>>> _______________________________________________
>>>>>> Gluster-users mailing list
>>>>>> Gluster-users at gluster.org
>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>>>>
>>>>> _______________________________________________
>>>>> Gluster-devel mailing list
>>>>> Gluster-devel at gluster.org
>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>>
>>>
>


More information about the Gluster-users mailing list