[Gluster-users] Blog on Hyperconverged Infrastructure using oVirt and Gluster

Paul Cuzner pcuzner at redhat.com
Thu Jan 14 06:18:05 UTC 2016


copying the vm's across the storage domains can be done with the storage
migrate feature. I did see a few problems in the past with migrating
running vm's in this way, but powered off vm's were fine.

However, it's not the fastest process though!

On Wed, Jan 13, 2016 at 4:28 AM, Krutika Dhananjay <kdhananj at redhat.com>
wrote:

> Hi Nicolas,
>
> Only files created _after_ features.shard is enabled will be 'sharded'.
> You could create a volume with sharding enabled and copy the images from
> your original volume into this new volume.
> If you don't like the feature and want to revert to the old state for some
> reason, then you would need to create a new volume without sharding and
> copy all your images from the sharded volume into this new volume.
> The different pieces of the file will get naturally stitched together once
> they land in the new volume.
>
> HTH,
> Krutika
>
>
> ------------------------------
>
> *From: *"Nicolas Ecarnot" <nicolas at ecarnot.net>
> *To: *gluster-users at gluster.org
> *Sent: *Tuesday, January 12, 2016 7:35:16 PM
> *Subject: *Re: [Gluster-users] Blog on Hyperconverged Infrastructure
> using oVirt and Gluster
>
>
> Le 12/01/2016 12:40, Ramesh Nachimuthu a écrit :
> > Hi Folks,
> >
> >    Have you ever wondered about Hyperconverged Ovirt and Gluster Setup.
> > Here is an answer[1]. I wrote a blog explaining how to setup oVirt in a
> > hyper-converged mode with Gluster.
> >
> > [1]
> > <
> http://blogs-ramesh.blogspot.in/2016/01/ovirt-and-gluster-hyperconvergence.html
> >
> http://blogs-ramesh.blogspot.in/2016/01/ovirt-and-gluster-hyperconvergence.htm
> > *
> > *Regards,
> > Ramesh
> >
> >
> > _______________________________________________
> > Gluster-users mailing list
> > Gluster-users at gluster.org
> > http://www.gluster.org/mailman/listinfo/gluster-users
> >
>
> Hi Ramesh,
>
> Thank you for this very detailled and nice post.
> We're using a similar setup here in one of our DC, except the sharding
> we weren't aware of.
> Is it possible to activate the sharding afterward, or is it something to
> be done before filling the volume?
> Is it revertable?
>
> --
> Nicolas ECARNOT
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users
>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160114/787e60e6/attachment.html>


More information about the Gluster-users mailing list