[Gluster-users] geo-replication 3.6.7 - no transition from hybrid to changelog crawl
Dietmar Putz
putz at 3qmedien.net
Sat Jan 2 16:26:02 UTC 2016
Hello all,
one more time i need some help with a geo-replication problem.
recently i started a new geo-replication. the master volume contains
about 45 TB data and the slave volume was new created before
geo-replication setup was done.
master and slave is a 6 node distributed replicated volume running
glusterfs-server 3.6.7-ubuntu1~trusty1.
geo-rep was starting without problems. since few days the slave volume
contains about 200 GB more data than the master volume and i expected
that the crawl status changes from 'hybrid crawl' to 'changelog crawl'
but it remains in 'hybrid crawl'.
the 'status detail' output far below shows more than 10 million synced
files while the entire master volume contains just about 2 million
files. some tests show that files are not deleted on the slave volume.
as far as i know the hybrid crawl has the limitation of not replicating
deletes and renames to the slave thus the geo-rep needs to achieve the
'changelog crawl' status after initial sync...
usually this should happen more or less automatically, is this right ?
the geo-rep frequently fails with below shown "OSError: [Errno 16]
Device or resource busy", this error appears about every 3-4 hours on
each active master node.
i guess the frequent appearance of this error prevent geo-rep from
changing to 'changelog crawl', does somebody experienced such problem,
is this the cause of the problem ?
i found some similar reports on gluster.org for gfs 3.5, 3.6 and 3.7 but
none of them point me to a solution...
does anybody know a solution or is there a workaround to achieve the
changelog crawl status...?
Any help would be very appreciated
best regards
dietmar
Master gluster-ger-ber-07:
-----------------------------
[2016-01-02 11:39:48.122546] I [master(/gluster-export):1343:crawl]
_GMaster: processing xsync changelog
/var/lib/misc/glusterfsd/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01/9d7139ecf10a6fc33a
6e41d8d6e56984/xsync/XSYNC-CHANGELOG.1451724692
[2016-01-02 11:42:55.182342] I [master(/gluster-export):1343:crawl]
_GMaster: processing xsync changelog
/var/lib/misc/glusterfsd/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01/9d7139ecf10a6fc33a
6e41d8d6e56984/xsync/XSYNC-CHANGELOG.1451724751
[2016-01-02 11:44:11.168962] I [master(/gluster-export):1340:crawl]
_GMaster: finished hybrid crawl syncing, stime: (-1, 0)
[2016-01-02 11:44:11.246845] I [master(/gluster-export):490:crawlwrap]
_GMaster: primary master with volume id
6a071cfa-b150-4f0b-b1ed-96ab5d4bd671 ...
[2016-01-02 11:44:11.265209] I [master(/gluster-export):501:crawlwrap]
_GMaster: crawl interval: 3 seconds
[2016-01-02 11:44:11.896940] I [master(/gluster-export):1192:crawl]
_GMaster: slave's time: (-1, 0)
[2016-01-02 11:44:12.171761] E [repce(/gluster-export):207:__call__]
RepceClient: call 18897:139899553576768:1451735052.09 (entry_ops) failed
on peer with OSError
[2016-01-02 11:44:12.172101] E
[syncdutils(/gluster-export):270:log_raise_exception] <top>: FAIL:
Traceback (most recent call last):
File
"/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/gsyncd.py", line
164, in main
main_i()
File
"/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/gsyncd.py", line
643, in main_i
local.service_loop(*[r for r in [remote] if r])
File
"/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/resource.py",
line 1344, in service_loop
g2.crawlwrap()
File
"/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/master.py", line
539, in crawlwrap
self.crawl(no_stime_update=no_stime_update)
File
"/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/master.py", line
1204, in crawl
self.process(changes)
File
"/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/master.py", line
956, in process
self.process_change(change, done, retry)
File
"/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/master.py", line
920, in process_change
self.slave.server.entry_ops(entries)
File
"/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/repce.py", line
226, in __call__
return self.ins(self.meth, *a)
File
"/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/repce.py", line
208, in __call__
raise res
OSError: [Errno 16] Device or resource busy
[2016-01-02 11:44:12.258982] I
[syncdutils(/gluster-export):214:finalize] <top>: exiting.
[2016-01-02 11:44:12.321808] I [repce(agent):92:service_loop]
RepceServer: terminating on reaching EOF.
[2016-01-02 11:44:12.349766] I [syncdutils(agent):214:finalize] <top>:
exiting.
[2016-01-02 11:44:12.435992] I [monitor(monitor):141:set_state] Monitor:
new state: faulty
[2016-01-02 11:44:23.164284] I [monitor(monitor):215:monitor] Monitor:
------------------------------------------------------------
[2016-01-02 11:44:23.169981] I [monitor(monitor):216:monitor] Monitor:
starting gsyncd worker
[2016-01-02 11:44:23.216662] I [changelogagent(agent):72:__init__]
ChangelogAgent: Agent listining...
[2016-01-02 11:44:23.239778] I [gsyncd(/gluster-export):633:main_i]
<top>: syncing: gluster://localhost:ger-ber-01 ->
ssh://root@gluster-wien-07-int:gluster://localhost:aut-wien-vol-01
[2016-01-02 11:44:26.358613] I
[master(/gluster-export):75:gmaster_builder] <top>: setting up xsync
change detection mode
[2016-01-02 11:44:26.358983] I [master(/gluster-export):413:__init__]
_GMaster: using 'rsync' as the sync engine
[2016-01-02 11:44:26.359985] I
[master(/gluster-export):75:gmaster_builder] <top>: setting up changelog
change detection mode
[2016-01-02 11:44:26.360243] I [master(/gluster-export):413:__init__]
_GMaster: using 'rsync' as the sync engine
[2016-01-02 11:44:26.361159] I
[master(/gluster-export):75:gmaster_builder] <top>: setting up
changeloghistory change detection mode
[2016-01-02 11:44:26.361377] I [master(/gluster-export):413:__init__]
_GMaster: using 'rsync' as the sync engine
[2016-01-02 11:44:26.402601] I [master(/gluster-export):1311:register]
_GMaster: xsync temp directory:
/var/lib/misc/glusterfsd/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01/9d7139ecf10a6fc33a6e
41d8d6e56984/xsync
[2016-01-02 11:44:26.402848] I
[resource(/gluster-export):1318:service_loop] GLUSTER: Register time:
1451735066
[2016-01-02 11:44:27.26012] I [master(/gluster-export):490:crawlwrap]
_GMaster: primary master with volume id
6a071cfa-b150-4f0b-b1ed-96ab5d4bd671 ...
[2016-01-02 11:44:27.31605] I [master(/gluster-export):501:crawlwrap]
_GMaster: crawl interval: 1 seconds
[2016-01-02 11:44:27.66868] I [master(/gluster-export):1226:crawl]
_GMaster: starting history crawl... turns: 1, stime: (-1, 0)
[2016-01-02 11:44:27.67043] I [master(/gluster-export):1229:crawl]
_GMaster: stime not available, abandoning history crawl
[2016-01-02 11:44:27.112426] I [master(/gluster-export):490:crawlwrap]
_GMaster: primary master with volume id
6a071cfa-b150-4f0b-b1ed-96ab5d4bd671 ...
[2016-01-02 11:44:27.117506] I [master(/gluster-export):501:crawlwrap]
_GMaster: crawl interval: 60 seconds
[2016-01-02 11:44:27.140610] I [master(/gluster-export):1333:crawl]
_GMaster: starting hybrid crawl..., stime: (-1, 0)
[2016-01-02 11:45:23.417233] I [monitor(monitor):141:set_state] Monitor:
new state: Stable
[2016-01-02 11:45:48.225915] I [master(/gluster-export):1343:crawl]
_GMaster: processing xsync changelog
/var/lib/misc/glusterfsd/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01/9d7139ecf10a6fc33a
6e41d8d6e56984/xsync/XSYNC-CHANGELOG.1451735067
[2016-01-02 11:47:08.65231] I [master(/gluster-export):1343:crawl]
_GMaster: processing xsync changelog
/var/lib/misc/glusterfsd/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01/9d7139ecf10a6fc33a6
e41d8d6e56984/xsync/XSYNC-CHANGELOG.1451735148
...
slave gluster-wien-07 :
------------------------
[2016-01-02 11:44:12.007744] W [fuse-bridge.c:1261:fuse_err_cbk]
0-glusterfs-fuse: 1959820: SETXATTR()
/.gfid/5e436e5b-086b-4720-9e70-0e49c8e09698 => -1 (File exists)
[2016-01-02 11:44:12.010970] W
[client-rpc-fops.c:240:client3_3_mknod_cbk] 0-aut-wien-vol-01-client-5:
remote operation failed: File exists. Path:
<gfid:666bceac-7c14-4efd-81fe-8185458fcf1f>/11-kxyrM3NgdtBWPFv4.webm
[2016-01-02 11:44:12.011327] W
[client-rpc-fops.c:240:client3_3_mknod_cbk] 0-aut-wien-vol-01-client-4:
remote operation failed: File exists. Path:
<gfid:666bceac-7c14-4efd-81fe-8185458fcf1f>/11-kxyrM3NgdtBWPFv4.webm
[2016-01-02 11:44:12.012054] W [fuse-bridge.c:1261:fuse_err_cbk]
0-glusterfs-fuse: 1959822: SETXATTR()
/.gfid/666bceac-7c14-4efd-81fe-8185458fcf1f => -1 (File exists)
[2016-01-02 11:44:12.024743] W
[client-rpc-fops.c:240:client3_3_mknod_cbk] 0-aut-wien-vol-01-client-5:
remote operation failed: File exists. Path:
<gfid:5bfd6f99-07e8-4b2f-844b-aa0b6535c055>/Gf4FYbpDTC7yK2mv.png
[2016-01-02 11:44:12.024970] W
[client-rpc-fops.c:240:client3_3_mknod_cbk] 0-aut-wien-vol-01-client-4:
remote operation failed: File exists. Path:
<gfid:5bfd6f99-07e8-4b2f-844b-aa0b6535c055>/Gf4FYbpDTC7yK2mv.png
[2016-01-02 11:44:12.025601] W [fuse-bridge.c:1261:fuse_err_cbk]
0-glusterfs-fuse: 1959823: SETXATTR()
/.gfid/5bfd6f99-07e8-4b2f-844b-aa0b6535c055 => -1 (File exists)
[2016-01-02 11:44:12.100688] I
[dht-selfheal.c:1065:dht_selfheal_layout_new_directory]
0-aut-wien-vol-01-dht: chunk size = 0xffffffff / 57217563 = 0x4b
[2016-01-02 11:44:12.100765] I
[dht-selfheal.c:1103:dht_selfheal_layout_new_directory]
0-aut-wien-vol-01-dht: assigning range size 0x5542c4a3 to
aut-wien-vol-01-replicate-0
[2016-01-02 11:44:12.100785] I
[dht-selfheal.c:1103:dht_selfheal_layout_new_directory]
0-aut-wien-vol-01-dht: assigning range size 0x5542c4a3 to
aut-wien-vol-01-replicate-1
[2016-01-02 11:44:12.100800] I
[dht-selfheal.c:1103:dht_selfheal_layout_new_directory]
0-aut-wien-vol-01-dht: assigning range size 0x5542c4a3 to
aut-wien-vol-01-replicate-2
[2016-01-02 11:44:12.100839] I [MSGID: 109036]
[dht-common.c:6296:dht_log_new_layout_for_dir_selfheal]
0-aut-wien-vol-01-dht: Setting layout of
<gfid:d4815ee4-3348-4105-9136-d0219d956ed8>/.dstXXX0HUpRD with
[Subvol_name: aut-wien-vol-01-re
plicate-0, Err: -1 , Start: 0 , Stop: 1430439074 ], [Subvol_name:
aut-wien-vol-01-replicate-1, Err: -1 , Start: 1430439075 , Stop:
2860878149 ], [Subvol_name: aut-wien-vol-01-replicate-2, Err: -1 ,
Start: 2860878150 , Stop: 4294967295 ],
[2016-01-02 11:44:12.114192] W
[client-rpc-fops.c:306:client3_3_mkdir_cbk] 0-aut-wien-vol-01-client-2:
remote operation failed: File exists. Path:
<gfid:cd3fd9ba-34b8-4c6b-ba72-4796b80b0ff2>/.dstXXb70G3x
[2016-01-02 11:44:12.114275] W
[client-rpc-fops.c:306:client3_3_mkdir_cbk] 0-aut-wien-vol-01-client-3:
remote operation failed: File exists. Path:
<gfid:cd3fd9ba-34b8-4c6b-ba72-4796b80b0ff2>/.dstXXb70G3x
[2016-01-02 11:44:12.114879] W [fuse-bridge.c:1261:fuse_err_cbk]
0-glusterfs-fuse: 1959831: SETXATTR()
/.gfid/cd3fd9ba-34b8-4c6b-ba72-4796b80b0ff2 => -1 (File exists)
[2016-01-02 11:44:12.118473] I [dht-layout.c:663:dht_layout_normalize]
0-aut-wien-vol-01-dht: Found anomalies in
/.gfid/cd3fd9ba-34b8-4c6b-ba72-4796b80b0ff2/.dstXXb70G3x (gfid =
00000000-0000-0000-0000-000000000000). Holes=1 overlaps=0
[2016-01-02 11:44:12.118537] I
[dht-selfheal.c:1065:dht_selfheal_layout_new_directory]
0-aut-wien-vol-01-dht: chunk size = 0xffffffff / 57217563 = 0x4b
[2016-01-02 11:44:12.118562] I
[dht-selfheal.c:1103:dht_selfheal_layout_new_directory]
0-aut-wien-vol-01-dht: assigning range size 0x5542c4a3 to
aut-wien-vol-01-replicate-2
[2016-01-02 11:44:12.118579] I
[dht-selfheal.c:1103:dht_selfheal_layout_new_directory]
0-aut-wien-vol-01-dht: assigning range size 0x5542c4a3 to
aut-wien-vol-01-replicate-0
[2016-01-02 11:44:12.118613] I
[dht-selfheal.c:1103:dht_selfheal_layout_new_directory]
0-aut-wien-vol-01-dht: assigning range size 0x5542c4a3 to
aut-wien-vol-01-replicate-1
[2016-01-02 11:44:12.120352] I [MSGID: 109036]
[dht-common.c:6296:dht_log_new_layout_for_dir_selfheal]
0-aut-wien-vol-01-dht: Setting layout of
/.gfid/cd3fd9ba-34b8-4c6b-ba72-4796b80b0ff2/.dstXXb70G3x with
[Subvol_name: aut-wien-vol-01-rep
licate-0, Err: -1 , Start: 1430439075 , Stop: 2860878149 ],
[Subvol_name: aut-wien-vol-01-replicate-1, Err: -1 , Start: 2860878150 ,
Stop: 4294967295 ], [Subvol_name: aut-wien-vol-01-replicate-2, Err: -1 ,
Start: 0 , Stop: 1430439074 ],
[2016-01-02 11:44:12.630949] I [fuse-bridge.c:4927:fuse_thread_proc]
0-fuse: unmounting /tmp/gsyncd-aux-mount-tOUOsz
[2016-01-02 11:44:12.633952] W [glusterfsd.c:1211:cleanup_and_exit] (-->
0-: received signum (15), shutting down
[2016-01-02 11:44:12.633964] I [fuse-bridge.c:5607:fini] 0-fuse:
Unmounting '/tmp/gsyncd-aux-mount-tOUOsz'.
[2016-01-02 11:44:23.946702] I [MSGID: 100030] [glusterfsd.c:2035:main]
0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.6.7
(args: /usr/sbin/glusterfs --aux-gfid-mount
--log-file=/var/log/glusterfs/geo-replication-slav
es/6a071cfa-b150-4f0b-b1ed-96ab5d4bd671:gluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01.gluster.log
--volfile-server=localhost --volfile-id=aut-wien-vol-01 --client-pid=-1
/tmp/gsyncd-aux-mount-otU3wS)
[2016-01-02 11:44:24.042128] I [dht-shared.c:337:dht_init_regex]
0-aut-wien-vol-01-dht: using regex rsync-hash-regex = ^\.(.+)\.[^.]+$
[2016-01-02 11:44:24.046315] I [client.c:2268:notify]
0-aut-wien-vol-01-client-0: parent translators are ready, attempting
connect on transport
[2016-01-02 11:44:24.046532] I [client.c:2268:notify]
0-aut-wien-vol-01-client-1: parent translators are ready, attempting
connect on transport
[2016-01-02 11:44:24.046664] I [client.c:2268:notify]
0-aut-wien-vol-01-client-2: parent translators are ready, attempting
connect on transport
[2016-01-02 11:44:24.046806] I [client.c:2268:notify]
0-aut-wien-vol-01-client-3: parent translators are ready, attempting
connect on transport
[2016-01-02 11:44:24.046940] I [client.c:2268:notify]
0-aut-wien-vol-01-client-4: parent translators are ready, attempting
connect on transport
[2016-01-02 11:44:24.047070] I [client.c:2268:notify]
0-aut-wien-vol-01-client-5: parent translators are ready, attempting
connect on transport
Final graph:
+------------------------------------------------------------------------------+
1: volume aut-wien-vol-01-client-0
2: type protocol/client
3: option ping-timeout 10
4: option remote-host gluster-wien-02-int
5: option remote-subvolume /gluster-export
6: option transport-type socket
7: option username 6b3d1fae-fa3e-4305-a4a0-fd27c7ac9929
8: option password 8777e154-476c-449a-89b2-3199872e4a1f
9: option send-gids true
10: end-volume
11:
12: volume aut-wien-vol-01-client-1
13: type protocol/client
14: option ping-timeout 10
15: option remote-host gluster-wien-03-int
16: option remote-subvolume /gluster-export
17: option transport-type socket
18: option username 6b3d1fae-fa3e-4305-a4a0-fd27c7ac9929
19: option password 8777e154-476c-449a-89b2-3199872e4a1f
20: option send-gids true
21: end-volume
22:
23: volume aut-wien-vol-01-replicate-0
24: type cluster/replicate
25: subvolumes aut-wien-vol-01-client-0 aut-wien-vol-01-client-1
26: end-volume
27:
28: volume aut-wien-vol-01-client-2
29: type protocol/client
30: option ping-timeout 10
31: option remote-host gluster-wien-04-int
32: option remote-subvolume /gluster-export
33: option transport-type socket
34: option username 6b3d1fae-fa3e-4305-a4a0-fd27c7ac9929
35: option password 8777e154-476c-449a-89b2-3199872e4a1f
36: option send-gids true
37: end-volume
38:
39: volume aut-wien-vol-01-client-3
40: type protocol/client
41: option ping-timeout 10
42: option remote-host gluster-wien-05-int
43: option remote-subvolume /gluster-export
44: option transport-type socket
45: option username 6b3d1fae-fa3e-4305-a4a0-fd27c7ac9929
46: option password 8777e154-476c-449a-89b2-3199872e4a1f
47: option send-gids true
48: end-volume
49:
50: volume aut-wien-vol-01-replicate-1
51: type cluster/replicate
52: subvolumes aut-wien-vol-01-client-2 aut-wien-vol-01-client-3
53: end-volume
54:
55: volume aut-wien-vol-01-client-4
56: type protocol/client
57: option ping-timeout 10
58: option remote-host gluster-wien-06-int
59: option remote-subvolume /gluster-export
60: option transport-type socket
61: option username 6b3d1fae-fa3e-4305-a4a0-fd27c7ac9929
62: option password 8777e154-476c-449a-89b2-3199872e4a1f
63: option send-gids true
64: end-volume
65:
66: volume aut-wien-vol-01-client-5
67: type protocol/client
68: option ping-timeout 10
69: option remote-host gluster-wien-07-int
70: option remote-subvolume /gluster-export
71: option transport-type socket
72: option username 6b3d1fae-fa3e-4305-a4a0-fd27c7ac9929
73: option password 8777e154-476c-449a-89b2-3199872e4a1f
74: option send-gids true
75: end-volume
76:
77: volume aut-wien-vol-01-replicate-2
78: type cluster/replicate
79: subvolumes aut-wien-vol-01-client-4 aut-wien-vol-01-client-5
80: end-volume
81:
82: volume aut-wien-vol-01-dht
83: type cluster/distribute
84: subvolumes aut-wien-vol-01-replicate-0
aut-wien-vol-01-replicate-1 aut-wien-vol-01-replicate-2
85: end-volume
86:
87: volume aut-wien-vol-01-write-behind
88: type performance/write-behind
89: subvolumes aut-wien-vol-01-dht
90: end-volume
91:
92: volume aut-wien-vol-01-read-ahead
93: type performance/read-ahead
94: subvolumes aut-wien-vol-01-write-behind
95: end-volume
96:
97: volume aut-wien-vol-01-io-cache
98: type performance/io-cache
99: option min-file-size 0
100: option cache-timeout 2
101: option cache-size 1024MB
102: subvolumes aut-wien-vol-01-read-ahead
103: end-volume
104:
105: volume aut-wien-vol-01-quick-read
106: type performance/quick-read
107: option cache-size 1024MB
108: subvolumes aut-wien-vol-01-io-cache
109: end-volume
110:
111: volume aut-wien-vol-01-open-behind
112: type performance/open-behind
113: subvolumes aut-wien-vol-01-quick-read
114: end-volume
115:
116: volume aut-wien-vol-01-md-cache
117: type performance/md-cache
118: subvolumes aut-wien-vol-01-open-behind
119: end-volume
120:
121: volume aut-wien-vol-01
122: type debug/io-stats
123: option latency-measurement off
124: option count-fop-hits off
125: subvolumes aut-wien-vol-01-md-cache
126: end-volume
127:
128: volume gfid-access-autoload
129: type features/gfid-access
130: subvolumes aut-wien-vol-01
131: end-volume
132:
133: volume meta-autoload
134: type meta
135: subvolumes gfid-access-autoload
136: end-volume
137:
+------------------------------------------------------------------------------+
[2016-01-02 11:44:24.047642] I [rpc-clnt.c:1761:rpc_clnt_reconfig]
0-aut-wien-vol-01-client-5: changing port to 49153 (from 0)
[2016-01-02 11:44:24.047927] I
[client-handshake.c:1413:select_server_supported_programs]
0-aut-wien-vol-01-client-5: Using Program GlusterFS 3.3, Num (1298437),
Version (330)
[2016-01-02 11:44:24.048044] I
[client-handshake.c:1200:client_setvolume_cbk]
0-aut-wien-vol-01-client-5: Connected to aut-wien-vol-01-client-5,
attached to remote volume '/gluster-export'.
[2016-01-02 11:44:24.048050] I
[client-handshake.c:1210:client_setvolume_cbk]
0-aut-wien-vol-01-client-5: Server and Client lk-version numbers are not
same, reopening the fds
[2016-01-02 11:44:24.048088] I [MSGID: 108005]
[afr-common.c:3684:afr_notify] 0-aut-wien-vol-01-replicate-2: Subvolume
'aut-wien-vol-01-client-5' came back up; going online.
[2016-01-02 11:44:24.048114] I
[client-handshake.c:188:client_set_lk_version_cbk]
0-aut-wien-vol-01-client-5: Server lk version = 1
[2016-01-02 11:44:24.048124] I [rpc-clnt.c:1761:rpc_clnt_reconfig]
0-aut-wien-vol-01-client-0: changing port to 49153 (from 0)
[2016-01-02 11:44:24.048132] I [rpc-clnt.c:1761:rpc_clnt_reconfig]
0-aut-wien-vol-01-client-1: changing port to 49153 (from 0)
[2016-01-02 11:44:24.048138] I [rpc-clnt.c:1761:rpc_clnt_reconfig]
0-aut-wien-vol-01-client-2: changing port to 49153 (from 0)
[2016-01-02 11:44:24.048146] I [rpc-clnt.c:1761:rpc_clnt_reconfig]
0-aut-wien-vol-01-client-3: changing port to 49153 (from 0)
[2016-01-02 11:44:24.048153] I [rpc-clnt.c:1761:rpc_clnt_reconfig]
0-aut-wien-vol-01-client-4: changing port to 49153 (from 0)
[2016-01-02 11:44:24.049070] I
[client-handshake.c:1413:select_server_supported_programs]
0-aut-wien-vol-01-client-0: Using Program GlusterFS 3.3, Num (1298437),
Version (330)
[2016-01-02 11:44:24.049094] I
[client-handshake.c:1413:select_server_supported_programs]
0-aut-wien-vol-01-client-3: Using Program GlusterFS 3.3, Num (1298437),
Version (330)
[2016-01-02 11:44:24.049113] I
[client-handshake.c:1413:select_server_supported_programs]
0-aut-wien-vol-01-client-2: Using Program GlusterFS 3.3, Num (1298437),
Version (330)
[2016-01-02 11:44:24.049131] I
[client-handshake.c:1413:select_server_supported_programs]
0-aut-wien-vol-01-client-1: Using Program GlusterFS 3.3, Num (1298437),
Version (330)
[2016-01-02 11:44:24.049224] I
[client-handshake.c:1413:select_server_supported_programs]
0-aut-wien-vol-01-client-4: Using Program GlusterFS 3.3, Num (1298437),
Version (330)
[2016-01-02 11:44:24.049307] I
[client-handshake.c:1200:client_setvolume_cbk]
0-aut-wien-vol-01-client-0: Connected to aut-wien-vol-01-client-0,
attached to remote volume '/gluster-export'.
[2016-01-02 11:44:24.049312] I
[client-handshake.c:1210:client_setvolume_cbk]
0-aut-wien-vol-01-client-0: Server and Client lk-version numbers are not
same, reopening the fds
[2016-01-02 11:44:24.049324] I [MSGID: 108005]
[afr-common.c:3684:afr_notify] 0-aut-wien-vol-01-replicate-0: Subvolume
'aut-wien-vol-01-client-0' came back up; going online.
[2016-01-02 11:44:24.049384] I
[client-handshake.c:1200:client_setvolume_cbk]
0-aut-wien-vol-01-client-3: Connected to aut-wien-vol-01-client-3,
attached to remote volume '/gluster-export'.
[2016-01-02 11:44:24.049389] I
[client-handshake.c:1210:client_setvolume_cbk]
0-aut-wien-vol-01-client-3: Server and Client lk-version numbers are not
same, reopening the fds
[2016-01-02 11:44:24.049400] I [MSGID: 108005]
[afr-common.c:3684:afr_notify] 0-aut-wien-vol-01-replicate-1: Subvolume
'aut-wien-vol-01-client-3' came back up; going online.
[2016-01-02 11:44:24.049418] I
[client-handshake.c:1200:client_setvolume_cbk]
0-aut-wien-vol-01-client-2: Connected to aut-wien-vol-01-client-2,
attached to remote volume '/gluster-export'.
[2016-01-02 11:44:24.049422] I
[client-handshake.c:1210:client_setvolume_cbk]
0-aut-wien-vol-01-client-2: Server and Client lk-version numbers are not
same, reopening the fds
[2016-01-02 11:44:24.049460] I
[client-handshake.c:1200:client_setvolume_cbk]
0-aut-wien-vol-01-client-1: Connected to aut-wien-vol-01-client-1,
attached to remote volume '/gluster-export'.
[2016-01-02 11:44:24.049465] I
[client-handshake.c:1210:client_setvolume_cbk]
0-aut-wien-vol-01-client-1: Server and Client lk-version numbers are not
same, reopening the fds
[2016-01-02 11:44:24.049493] I
[client-handshake.c:188:client_set_lk_version_cbk]
0-aut-wien-vol-01-client-0: Server lk version = 1
[2016-01-02 11:44:24.049567] I
[client-handshake.c:188:client_set_lk_version_cbk]
0-aut-wien-vol-01-client-3: Server lk version = 1
[2016-01-02 11:44:24.049632] I
[client-handshake.c:1200:client_setvolume_cbk]
0-aut-wien-vol-01-client-4: Connected to aut-wien-vol-01-client-4,
attached to remote volume '/gluster-export'.
[2016-01-02 11:44:24.049638] I
[client-handshake.c:1210:client_setvolume_cbk]
0-aut-wien-vol-01-client-4: Server and Client lk-version numbers are not
same, reopening the fds
[2016-01-02 11:44:24.052103] I [fuse-bridge.c:5086:fuse_graph_setup]
0-fuse: switched to graph 0
[2016-01-02 11:44:24.052150] I
[client-handshake.c:188:client_set_lk_version_cbk]
0-aut-wien-vol-01-client-2: Server lk version = 1
[2016-01-02 11:44:24.052163] I
[client-handshake.c:188:client_set_lk_version_cbk]
0-aut-wien-vol-01-client-4: Server lk version = 1
[2016-01-02 11:44:24.052192] I
[client-handshake.c:188:client_set_lk_version_cbk]
0-aut-wien-vol-01-client-1: Server lk version = 1
[2016-01-02 11:44:24.052204] I [fuse-bridge.c:4015:fuse_init]
0-glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.22
kernel 7.20
[2016-01-02 11:44:24.053991] I
[afr-common.c:1491:afr_local_discovery_cbk]
0-aut-wien-vol-01-replicate-2: selecting local read_child
aut-wien-vol-01-client-5
[2016-01-02 11:45:48.613563] W
[client-rpc-fops.c:306:client3_3_mkdir_cbk] 0-aut-wien-vol-01-client-5:
remote operation failed: File exists. Path: /keys
[2016-01-02 11:45:48.614131] W
[client-rpc-fops.c:306:client3_3_mkdir_cbk] 0-aut-wien-vol-01-client-4:
remote operation failed: File exists. Path: /keys
[2016-01-02 11:45:48.614436] W [fuse-bridge.c:1261:fuse_err_cbk]
0-glusterfs-fuse: 12: SETXATTR()
/.gfid/00000000-0000-0000-0000-000000000001 => -1 (File exists)
...
[ 13:41:40 ] - root at gluster-ger-ber-07
/var/log/glusterfs/geo-replication/ger-ber-01 $gluster volume
geo-replication ger-ber-01 gluster-wien-07::aut-wien-vol-01 status detail
MASTER NODE MASTER VOL MASTER BRICK
SLAVE STATUS CHECKPOINT STATUS
CRAWL STATUS FILES SYNCD FILES PENDING BYTES PENDING DELETES
PENDING FILES SKIPPED
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
gluster-ger-ber-07 ger-ber-01 /gluster-export
gluster-wien-07-int::aut-wien-vol-01 Active N/A
Hybrid Crawl 10743644 8192 0 0 0
gluster-ger-ber-11 ger-ber-01 /gluster-export
gluster-wien-03-int::aut-wien-vol-01 Active N/A
Hybrid Crawl 16037091 8192 0 0 0
gluster-ger-ber-10 ger-ber-01 /gluster-export
gluster-wien-02-int::aut-wien-vol-01 Passive N/A
N/A 0 0 0 0 0
gluster-ger-ber-12 ger-ber-01 /gluster-export
gluster-wien-06-int::aut-wien-vol-01 Passive N/A
N/A 0 0 0 0 0
gluster-ger-ber-09 ger-ber-01 /gluster-export
gluster-wien-05-int::aut-wien-vol-01 Active N/A
Hybrid Crawl 16180514 8192 0 0 0
gluster-ger-ber-08 ger-ber-01 /gluster-export
gluster-wien-04-int::aut-wien-vol-01 Passive N/A
N/A 0 0 0 0 0
[ 13:41:55 ] - root at gluster-ger-ber-07
/var/log/glusterfs/geo-replication/ger-ber-01 $gluster volume
geo-replication ger-ber-01 gluster-wien-07::aut-wien-vol-01 config
special_sync_mode: partial
state_socket_unencoded:
/var/lib/glusterd/geo-replication/ger-ber-01_gluster-wien-07_aut-wien-vol-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01.socket
gluster_log_file:
/var/log/glusterfs/geo-replication/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01.gluster.log
ssh_command: ssh -p 2503 -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret.pem
ignore_deletes: true
change_detector: changelog
ssh_command_tar: ssh -p 2503 -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/tar_ssh.pem
state_file:
/var/lib/glusterd/geo-replication/ger-ber-01_gluster-wien-07_aut-wien-vol-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01.status
remote_gsyncd: /nonexistent/gsyncd
log_file:
/var/log/glusterfs/geo-replication/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01.log
changelog_log_file:
/var/log/glusterfs/geo-replication/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01-changes.log
socketdir: /var/run
working_dir:
/var/lib/misc/glusterfsd/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01
state_detail_file:
/var/lib/glusterd/geo-replication/ger-ber-01_gluster-wien-07_aut-wien-vol-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01-detail.status
session_owner: 6a071cfa-b150-4f0b-b1ed-96ab5d4bd671
gluster_command_dir: /usr/sbin/
pid_file:
/var/lib/glusterd/geo-replication/ger-ber-01_gluster-wien-07_aut-wien-vol-01/ssh%3A%2F%2Froot%4082.199.131.132%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-vol-01.pid
georep_session_working_dir:
/var/lib/glusterd/geo-replication/ger-ber-01_gluster-wien-07_aut-wien-vol-01/
gluster_params: aux-gfid-mount
volume_id: 6a071cfa-b150-4f0b-b1ed-96ab5d4bd671
[ 13:42:11 ] - root at gluster-ger-ber-07
/var/log/glusterfs/geo-replication/ger-ber-01 $
More information about the Gluster-users
mailing list