[Gluster-users] geo-rep: remote operation failed - No such file or directory
ML mail
mlnospam at yahoo.com
Fri Feb 26 21:04:01 UTC 2016
So I have now followed your procedure and I have the feeling that it worked because I find the same amount of files on the geo-rep slave node as on the master node. But there where quite a lot of operation not permitted and no such file or directory warnings on the slave node geo-rep log file. Also on the master the geo-rep status detail command outputs 1335 under the FAILUREs column.
After the resync I tried to add a new file and see if it appeared on the slave node but that did not work at all and the slave node shows the following warnings:
[2016-02-26 20:20:08.833047] W [fuse-bridge.c:1989:fuse_create_cbk] 0-glusterfs-fuse: 1979732: /.gfid/3483d2fb-ab26-46f0-adc3-75391a96b369 => -1 (Operation not permitted)
[2016-02-26 20:20:09.507067] W [MSGID: 114031] [client-rpc-fops.c:2971:client3_3_lookup_cbk] 0-woelkli-pro-geo-client-0: remote operation failed. Path: <gfid:b515e589-1302-483e-b5a8-a767b0c5b3d0> (b515e589-1302-483e-b5a8-a767b0c5b3d0) [No such file or directory]
[2016-02-26 20:20:09.939786] W [fuse-bridge.c:1989:fuse_create_cbk] 0-glusterfs-fuse: 1979794: /.gfid/3483d2fb-ab26-46f0-adc3-75391a96b369 => -1 (Operation not permitted)
[2016-02-26 20:20:11.053035] W [fuse-bridge.c:1989:fuse_create_cbk] 0-glusterfs-fuse: 1979831: /.gfid/3483d2fb-ab26-46f0-adc3-75391a96b369 => -1 (Operation not permitted)
[2016-02-26 20:20:12.077440] W [fuse-bridge.c:1989:fuse_create_cbk] 0-glusterfs-fuse: 1979874: /.gfid/3483d2fb-ab26-46f0-adc3-75391a96b369 => -1 (Operation not permitted)
[2016-02-26 20:20:13.129645] W [fuse-bridge.c:1989:fuse_create_cbk] 0-glusterfs-fuse: 1979917: /.gfid/3483d2fb-ab26-46f0-adc3-75391a96b369 => -1 (Operation not permitted)
[2016-02-26 20:20:14.243425] W [fuse-bridge.c:1989:fuse_create_cbk] 0-glusterfs-fuse: 1979960: /.gfid/3483d2fb-ab26-46f0-adc3-75391a96b369 => -1 (Operation not permitted)
[2016-02-26 20:20:15.267638] W [fuse-bridge.c:1989:fuse_create_cbk] 0-glusterfs-fuse: 1980003: /.gfid/3483d2fb-ab26-46f0-adc3-75391a96b369 => -1 (Operation not permitted)
[2016-02-26 20:20:16.321249] W [fuse-bridge.c:1989:fuse_create_cbk] 0-glusterfs-fuse: 1980046: /.gfid/3483d2fb-ab26-46f0-adc3-75391a96b369 => -1 (Operation not permitted)
[2016-02-26 20:20:17.433468] W [fuse-bridge.c:1989:fuse_create_cbk] 0-glusterfs-fuse: 1980089: /.gfid/3483d2fb-ab26-46f0-adc3-75391a96b369 => -1 (Operation not permitted)
[2016-02-26 20:20:18.459165] W [fuse-bridge.c:1989:fuse_create_cbk] 0-glusterfs-fuse: 1980132: /.gfid/3483d2fb-ab26-46f0-adc3-75391a96b369 => -1 (Operation not permitted)
Any idea what is wrong now?
Also for the point number 3 in your steps I wasn't sure if I should delete the changelogs of all master nodes bricks but that's what I did so I delete the whole changelogs directory on my two nodes bricks. Finally for point number 5 of your steps I have delete the whole data as well as the .glusterfs and .trashcan directory on the volume of my slave node, I hope that was correct.
Regards
ML
On Friday, February 26, 2016 5:54 AM, Aravinda <avishwan at redhat.com> wrote:
regards
Aravinda
On 02/26/2016 12:30 AM, ML mail wrote:
> Hi Aravinda,
>
> Many thanks for the steps. I have a few questions about it:
>
> - in your point number 3, can I simply do an "rm -rf /my/brick/.glusterfs/changelogs" ?
Yes
> - in your point number 4, do I need to remove the attributes from every master nodes?
Yes, from all the bricks of Master Volume.
> - i am currently using GlusterFS 3.7.6, will this procedure work with version 3.7.6 or do I need version 3.7.8 or 3.7.9?
It should work.
>
>
> Regards
> ML
>
>
>
> On Thursday, February 25, 2016 11:57 AM, Aravinda <avishwan at redhat.com> wrote:
> Steps to force Geo-rep to sync from beginning
>
> 1. Stop Geo-replication
> 2. Disable the Changelog using `gluster volume set <MASTER VOLNAME>
> changelog.changelog off`
> 3. Delete all changelogs and htime files from Brick backend of Master
> Volume, $BRICK/.glusterfs/changelogs
> 4. Remove stime xattrs from all Brick root of Master Volume (setfattr -x
> trusted.glusterfs.<MASTERVOL_ID>.<SLAVEVOL_ID>.stime)
> Where ID is `gluster volume info <VOLNAME> | grep ID`
> 5. Enable changelog again `gluster volume set <MASTER VOLNAME>
> changelog.changelog on`
> 5. Clean the Slave Volume by deleting all content.
> 6. Start Geo-replication as usual, This will start syncing like fresh setup.
>
> You can try this re-setup with 3.7.9 release(which is expected anytime
> before mid March), We are trying to merge Geo-rep patches related to
> this issue for glusterfs-3.7.9
>
> Geo-rep should cleanup this xattrs when session is deleted, We will work
> on that fix in future releases
> BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1311926
>
> regards
> Aravinda
>
>
> On 02/24/2016 09:59 PM, ML mail wrote:
>> That would be great thank you. For me it is not an option to delete the volume on my master node (2 nodes, 1 brick per node). On the other hand no problem to delete the volume on the slave node which is only used for geo-rep.
>>
>> Regards
>> ML
>>
>>
>>
>> On Wednesday, February 24, 2016 4:44 PM, Aravinda <avishwan at redhat.com> wrote:
>> We can provide workaround steps to resync from beginning without
>> deleting Volume(s).
>>
>> I will send the Session reset details by tomorrow.
>>
>> regards
>> Aravinda
>>
>> On 02/24/2016 09:08 PM, ML mail wrote:
>>> That's right I saw already a few error messages mentioning "Device or resource busy" and was wondering what it was...
>>>
>>> You mean I have to delete the brick on my slave node, delete the volume on my slave node and finally re-create the volume on my slave node in order to start geo-replication from the beginning again? I do not have to touch or delete anything on the master node, right?
>>>
>>>
>>> Regards
>>> ML
>>>
>>>
>>>
>>> On Wednesday, February 24, 2016 3:07 PM, Milind Changire <mchangir at redhat.com> wrote:
>>> ML,
>>> Since the fixes to geo-rep are yet to get into a release,
>>> I can only suggest you to be a bit patient.
>>> Also, since you are using logrotate to rotate logs, you
>>> will most likely get into the "No such file or directory"
>>> or "Device or resource busy" scenario on the slave again.
>>> I'm not saying logrotate is at fault, I'm just saying that
>>> that specific use case leads to an inconsistent gluster
>>> state.
>>>
>>> Unfortunately, you cannot selectively purge the changelogs.
>>> You will have to delete the volume and empty the bricks
>>> and recreate the volume with the empty bricks to start
>>> all over again.
>>>
>>> You can delete the volume with:
>>> # gluster volume stop <volume name>
>>> # gluster volume delete <volume name>
>>>
>>> --
>>> Milind
>>>
>>>
>>> ----- Original Message -----
>>> From: "ML mail" <mlnospam at yahoo.com>
>>> To: "Milind Changire" <mchangir at redhat.com>
>>> Cc: "Gluster-users" <gluster-users at gluster.org>
>>> Sent: Wednesday, February 24, 2016 4:44:27 PM
>>> Subject: Re: [Gluster-users] geo-rep: remote operation failed - No such file or directory
>>>
>>> Thanks Milind again for your help. I understand now the concept and managed to set the required attribute for forcing the resyncing. That worked but unfortunately it is a never ending story, I fix stuff, start geo-rep it goes for a few more files and fails again.
>>>
>>> Now I think it will be easier to reset geo-replication and start from scratch again, luckily my volume is only 16 GB big as I am still experimenting. What would be the correct way to reset geo-rep? I don't want to remove the config but I would like to trash all the changelogs, delete the whole data on the slave and re-start geo-rep. How should I proceed?
>>>
>>> Regards
>>> ML
>>>
>>>
>>>
>>>
>>> On Wednesday, February 24, 2016 10:14 AM, Milind Changire <mchangir at redhat.com> wrote:
>>> 1. You could use the script at
>>> https://gist.github.com/aravindavk/afb16813261794faa432
>>> to create a path from the gfid that you could cd to
>>> i.e. for gfid c4b19f1c-cc18-4727-87a4-18de8fe0089e
>>>
>>> 2. yes, you have to recursively set the virtual xattr
>>> on all entries in the directory tree
>>> Also, remember to set a value as well
>>> # setfattr -n glusterfs.geo-rep.trigger-sync -v 1 <file-path>
>>>
>>> Also, remember to set the virtual xattr via the volume
>>> mount path and not the brick back-end path.
>>> You should have geo-replication stopped when you are
>>> setting the virtual xattr and start it when you are
>>> done setting the xattr for the entire directory tree.
>>>
>>> --
>>> Milind
>>>
>>>
>>> ----- Original Message -----
>>> From: "ML mail" <mlnospam at yahoo.com>
>>> To: "Milind Changire" <mchangir at redhat.com>
>>> Cc: "Gluster-users" <gluster-users at gluster.org>
>>> Sent: Wednesday, February 24, 2016 1:46:11 PM
>>> Subject: Re: [Gluster-users] geo-rep: remote operation failed - No such file or directory
>>>
>>> Thank you for explaining me how the symbolic linking works in the the .glusterfs directory. Now regarding your new instructions I have two questions:
>>>
>>> 1) How can I find out which directory "OC_DEFAULT_MODULE" on my master brick I should run the
>>> setfattr command on? My problem here is that there are a lot of OC_DEFAULT_MODULE directories on my brick not just only a single one.
>>>
>>>
>>>
>>> 2) If I understand your last paragraph correctly, you want me to locate the correct OC_DEFAULT_MODULE directory and recursively use setfattr on each sub-directories and/or files inside that directory, is this correct?
>>>
>>> Regards
>>> ML
>>>
>>>
>>>
>>> On Wednesday, February 24, 2016 7:29 AM, Milind Changire <mchangir at redhat.com> wrote:
>>> ML,
>>> You just need to worry about the very first entry that you found with
>>> the find command:
>>>
>>> $ find .glusterfs -name c4b19f1c-cc18-4727-87a4-18de8fe0089e -ls
>>> 228215 0 lrwxrwxrwx 1 root root 66 Feb 19 08:52 .glusterfs/c4/b1/c4b19f1c-cc18-4727-87a4-18de8fe0089e -> ../../92/1b/921bfe8e-81ef-4579-b335-abfa2c7e6afb/OC_DEFAULT_MODULE
>>>
>>> Since the back-end entry is a symlink, it means that OC_DEFAULT_MODULE
>>> is a directory on the master and it is missing on the slave.
>>> If you try to recursively look at the parent gfids of each of the entries
>>> then they will always point to symlinks since a directory is always
>>> represented as a symlink at the glusterfs back-end, and you will follow
>>> them up to the ROOT gfid.
>>>
>>> -----
>>>
>>> Now, to get the OC_DEFAULT_MODULE directory replicated on the slave,
>>> you will have to set the virtual xattr on the entire directory tree
>>> in pre-order listing i.e. set the virtual xattr on the directory
>>> starting at OC_DEFAULT_MODULE and then on the entries inside the
>>> directory, and so on down the directory tree.
>>>
>>> --
>>> Milind
>>>
>>>
>>> ----- Original Message -----
>>> From: "ML mail" <mlnospam at yahoo.com>
>>> To: "Milind Changire" <mchangir at redhat.com>
>>> Cc: "Gluster-users" <gluster-users at gluster.org>
>>> Sent: Wednesday, February 24, 2016 12:25:26 AM
>>> Subject: Re: [Gluster-users] geo-rep: remote operation failed - No such file or directory
>>>
>>> Hi Milind,
>>>
>>> Thanks for the instructions for forcing the data sync of a specific file. I was not able to do that as I have discovered something even more weird by trying to find out the concerned file by GFID with the find command as you suggested. Indeed it looks like I have a symbolic link pointing to another one and then to another and so on, as you can see below:
>>>
>>> $ find .glusterfs -name c4b19f1c-cc18-4727-87a4-18de8fe0089e -ls
>>> 228215 0 lrwxrwxrwx 1 root root 66 Feb 19 08:52 .glusterfs/c4/b1/c4b19f1c-cc18-4727-87a4-18de8fe0089e -> ../../92/1b/921bfe8e-81ef-4579-b335-abfa2c7e6afb/OC_DEFAULT_MODULE
>>>
>>> $ ls -la 92/1b/921bfe8e-81ef-4579-b335-abfa2c7e6afb
>>> lrwxrwxrwx 1 root root 79 Feb 19 08:52 92/1b/921bfe8e-81ef-4579-b335-abfa2c7e6afb -> ../../d7/9f/d79f2ebd-029c-4ac5-8074-5eef7ff21236/160201_File_1602_XX.xls
>>>
>>>
>>> $ ls -la d7/9f/d79f2ebd-029c-4ac5-8074-5eef7ff21236
>>> lrwxrwxrwx 1 root root 53 Feb 15 07:34 d7/9f/d79f2ebd-029c-4ac5-8074-5eef7ff21236 -> ../../fd/ea/fdea1fc6-0f2a-43d2-8776-651cc6ea73e8/1602
>>>
>>>
>>> $ ls -la fd/ea/fdea1fc6-0f2a-43d2-8776-651cc6ea73e8
>>> lrwxrwxrwx 1 root root 55 Feb 15 07:29 fd/ea/fdea1fc6-0f2a-43d2-8776-651cc6ea73e8 -> ../../20/25/20253364-add8-4149-a7cf-cf46d237a45c/Banana
>>>
>>>
>>> Is this normal? I somehow don't understand this weird structure of never ending symbolic links... or am I missing something?
>>>
>>>
>>> Regards
>>> ML
>>>
>>>
>>>
>>> On Tuesday, February 23, 2016 6:31 AM, Milind Changire <mchangir at redhat.com> wrote:
>>> ML,
>>> You will have to search for the gfid c4b19f1c-cc18-4727-87a4-18de8fe0089e
>>> at the master cluster brick back-ends and run the following command for
>>> that specific file on the master cluster to force triggering a data sync [1]
>>>
>>> # setfattr -n glusterfs.geo-rep.trigger-sync <file-path>
>>>
>>> To search for the file at the brick back-end:
>>>
>>> # find /<path-to-brick>/.glusterfs -name c4b19f1c-cc18-4727-87a4-18de8fe0089e
>>>
>>> Once path to the file is found at any of the bricks, you can then use
>>> the setfattr command described above.
>>>
>>> Reference:
>>> [1] feature/changelog: Virtual xattr to trigger explicit sync in geo-rep
>>> http://review.gluster.org/#/c/9337/
>>> --
>>> Milind
>>>
>>>
>>> ----- Original Message -----
>>> From: "ML mail" <mlnospam at yahoo.com>
>>> To: "Milind Changire" <mchangir at redhat.com>
>>> Cc: "Gluster-users" <gluster-users at gluster.org>
>>> Sent: Monday, February 22, 2016 9:10:56 PM
>>> Subject: Re: [Gluster-users] geo-rep: remote operation failed - No such file or directory
>>>
>>> Hi Milind,
>>>
>>> Thanks for the suggestion, I did that for a few problematic files and it seems to continue but now I am stuck at the following error message on the slave:
>>>
>>> [2016-02-22 15:21:30.451133] W [MSGID: 114031] [client-rpc-fops.c:2971:client3_3_lookup_cbk] 0-myvolume-geo-client-0: remote operation failed. Path: <gfid:c4b19f1c-cc18-4727-87a4-18de8fe0089e> (c4b19f1c-cc18-4727-87a4-18de8fe0089e) [No such file or directory]
>>>
>>> As you can see this message does not include any file or directory name, so I can't go any delete that file or directory. Any other ideas how I may proceed here?
>>>
>>> Or maybe would it be easier if I delete the whole directory which I think is affected and start geo-rep from there? Or will this mess things up?
>>>
>>> Regards
>>> ML
>>>
>>>
>>>
>>> On Monday, February 22, 2016 12:12 PM, Milind Changire <mchangir at redhat.com> wrote:
>>> ML,
>>> You could try deleting problematic files on slave to recover geo-replication
>>> from Faulty state.
>>>
>>> However, changelogs generated due to logrotate scenario will still cause
>>> geo-replication to go into Faulty state frequently if geo-replication
>>> fails and restarts.
>>>
>>> The patches mentioned in an earlier mail are being worked upon and finalized.
>>> They will be available soon in a release which will avoid geo-replication
>>> going into a Faulty state.
>>>
>>> --
>>> Milind
>>>
>>>
>>> ----- Original Message -----
>>> From: "ML mail" <mlnospam at yahoo.com>
>>> To: "Milind Changire" <mchangir at redhat.com>, "Gluster-users" <gluster-users at gluster.org>
>>> Sent: Monday, February 22, 2016 1:27:14 PM
>>> Subject: Re: [Gluster-users] geo-rep: remote operation failed - No such file or directory
>>>
>>> Hi Milind,
>>>
>>> Any news on this issue? I was wondering how can I fix and restart my geo-replication? Can I simply delete the problematic file(s) on my slave and restart geo-rep?
>>>
>>> Regards
>>> ML
>>>
>>>
>>>
>>>
>>>
>>> On Wednesday, February 17, 2016 4:30 PM, ML mail <mlnospam at yahoo.com> wrote:
>>>
>>>
>>> Hi Milind,
>>>
>>> Thank you for your short analysis. Indeed that's exactly what happens, as soon as I restart geo-rep it replays the same over and over as it does not succeed.
>>>
>>>
>>> Now regarding the sequence of the file management operations I am not totally sure how it works but I can tell you that we are using ownCloud v8.2.2 (www.owncloud.org) and as storage for this cloud software we use GlusterFS. So it is very probable that ownCloud works like that: when a user uploads a new file if first creates it with another temporary name which it then either renames or moves after successful upload.
>>>
>>>
>>> I have the feeling this issue is related to my initial issue which I have reported earlier this month:
>>> https://www.gluster.org/pipermail/gluster-users/2016-February/025176.html
>>>
>>> For now my question would be how do I get to restart geo-replication succesfully?
>>>
>>> Regards
>>> ML
>>>
>>>
>>>
>>> On Wednesday, February 17, 2016 4:10 PM, Milind Changire <mchangir at redhat.com> wrote:
>>>
>>>
>>> As per the slave logs, there is an attempt to RENAME files
>>> i.e. a .part file getting renamed to a name without the
>>> .part suffix
>>>
>>> Just restarting geo-rep isn't going to help much if
>>> you've already hit the problem. Since the last CHANGELOG
>>> is replayed by geo-rep on a restart, you'll most probably
>>> encounter the same log messages in the logs.
>>>
>>> Are the .part files CREATEd, RENAMEd and DELETEd with the
>>> same name often? Are the operations somewhat in the following
>>> sequence that happen on the geo-replication master cluster?
>>>
>>> CREATE f1.part
>>> RENAME f1.part f1
>>> DELETE f1
>>> CREATE f1.part
>>> RENAME f1.part f1
>>> ...
>>> ...
>>>
>>>
>>> If not, then it would help if you could send the sequence
>>> of file management operations.
>>>
>>> --
>>> Milind
>>>
>>>
>>> ----- Original Message -----
>>> From: "Kotresh Hiremath Ravishankar" <khiremat at redhat.com>
>>> To: "ML mail" <mlnospam at yahoo.com>
>>> Cc: "Gluster-users" <gluster-users at gluster.org>, "Milind Changire" <mchangir at redhat.com>
>>> Sent: Tuesday, February 16, 2016 6:28:21 PM
>>> Subject: Re: [Gluster-users] geo-rep: remote operation failed - No such file or directory
>>>
>>> Ccing Milind, he would be able to help
>>>
>>> Thanks and Regards,
>>> Kotresh H R
>>>
>>> ----- Original Message -----
>>>> From: "ML mail" <mlnospam at yahoo.com>
>>>> To: "Gluster-users" <gluster-users at gluster.org>
>>>> Sent: Monday, February 15, 2016 4:41:56 PM
>>>> Subject: [Gluster-users] geo-rep: remote operation failed - No such file or directory
>>>>
>>>> Hello,
>>>>
>>>> I noticed that the geo-replication of a volume has STATUS "Faulty" and while
>>>> looking in the *.gluster.log file in
>>>> /var/log/glusterfs/geo-replication-slaves/ on my slave I can see the
>>>> following relevant problem:
>>>>
>>>> [2016-02-15 10:58:40.402516] I [rpc-clnt.c:1847:rpc_clnt_reconfig]
>>>> 0-myvolume-geo-client-0: changing port to 49152 (from 0)
>>>> [2016-02-15 10:58:40.403928] I [MSGID: 114057]
>>>> [client-handshake.c:1437:select_server_supported_programs]
>>>> 0-myvolume-geo-client-0: Using Program GlusterFS 3.3, Num (1298437), Version
>>>> (330)
>>>> [2016-02-15 10:58:40.404130] I [MSGID: 114046]
>>>> [client-handshake.c:1213:client_setvolume_cbk] 0-myvolume-geo-client-0:
>>>> Connected to myvolume-geo-client-0, attached to remote volume
>>>> '/data/myvolume-geo/brick'.
>>>> [2016-02-15 10:58:40.404150] I [MSGID: 114047]
>>>> [client-handshake.c:1224:client_setvolume_cbk] 0-myvolume-geo-client-0:
>>>> Server and Client lk-version numbers are not same, reopening the fds
>>>> [2016-02-15 10:58:40.410150] I [fuse-bridge.c:5137:fuse_graph_setup] 0-fuse:
>>>> switched to graph 0
>>>> [2016-02-15 10:58:40.410223] I [MSGID: 114035]
>>>> [client-handshake.c:193:client_set_lk_version_cbk] 0-myvolume-geo-client-0:
>>>> Server lk version = 1
>>>> [2016-02-15 10:58:40.410370] I [fuse-bridge.c:4030:fuse_init]
>>>> 0-glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.22 kernel
>>>> 7.23
>>>> [2016-02-15 10:58:45.662416] I [MSGID: 109066] [dht-rename.c:1411:dht_rename]
>>>> 0-myvolume-geo-dht: renaming
>>>> /.gfid/94310944-7f8a-421d-a51f-1e23e28da9cc/Bild_03_Rosen.JPG-chunking-2242590604-0.FpKL3SIUb9vKHyjd.part
>>>> (hash=myvolume-geo-client-0/cache=myvolume-geo-client-0) =>
>>>> /.gfid/94310944-7f8a-421d-a51f-1e23e28da9cc/Bild_03_Rosen.JPG-chunking-2242590604-0
>>>> (hash=myvolume-geo-client-0/cache=<nul>)
>>>> [2016-02-15 10:58:45.665144] I [MSGID: 109066] [dht-rename.c:1411:dht_rename]
>>>> 0-myvolume-geo-dht: renaming
>>>> /.gfid/94310944-7f8a-421d-a51f-1e23e28da9cc/Bild_03_Rosen.JPG-chunking-2242590604-1.C6l0DEurb2y3Azw4.part
>>>> (hash=myvolume-geo-client-0/cache=myvolume-geo-client-0) =>
>>>> /.gfid/94310944-7f8a-421d-a51f-1e23e28da9cc/Bild_03_Rosen.JPG-chunking-2242590604-1
>>>> (hash=myvolume-geo-client-0/cache=<nul>)
>>>> [2016-02-15 10:58:45.749829] I [MSGID: 109066] [dht-rename.c:1411:dht_rename]
>>>> 0-myvolume-geo-dht: renaming
>>>> /.gfid/94310944-7f8a-421d-a51f-1e23e28da9cc/Bild_02_Pilz.JPG-chunking-628343631-0.ajEnSguUZ7EkzjzT.part
>>>> (hash=myvolume-geo-client-0/cache=myvolume-geo-client-0) =>
>>>> /.gfid/94310944-7f8a-421d-a51f-1e23e28da9cc/Bild_02_Pilz.JPG-chunking-628343631-0
>>>> (hash=myvolume-geo-client-0/cache=<nul>)
>>>> [2016-02-15 10:58:45.750225] W [MSGID: 114031]
>>>> [client-rpc-fops.c:2971:client3_3_lookup_cbk] 0-myvolume-geo-client-0:
>>>> remote operation failed. Path:
>>>> /.gfid/94310944-7f8a-421d-a51f-1e23e28da9cc/Bild_02_Pilz.JPG-chunking-628343631-0.ajEnSguUZ7EkzjzT.part
>>>> (9164caeb-740d-4429-a3bd-c85f40c35e11) [No such file or directory]
>>>> [2016-02-15 10:58:45.750418] W [fuse-bridge.c:1777:fuse_rename_cbk]
>>>> 0-glusterfs-fuse: 60:
>>>> /.gfid/94310944-7f8a-421d-a51f-1e23e28da9cc/Bild_02_Pilz.JPG-chunking-628343631-0.ajEnSguUZ7EkzjzT.part
>>>> ->
>>>> /.gfid/94310944-7f8a-421d-a51f-1e23e28da9cc/Bild_02_Pilz.JPG-chunking-628343631-0
>>>> => -1 (Device or resource busy)
>>>> [2016-02-15 10:58:45.767788] I [fuse-bridge.c:4984:fuse_thread_proc] 0-fuse:
>>>> unmounting /tmp/gsyncd-aux-mount-bZ9SMt
>>>> [2016-02-15 10:58:45.768063] W [glusterfsd.c:1236:cleanup_and_exit]
>>>> (-->/lib/x86_64-linux-gnu/libpthread.so.0(+0x80a4) [0x7feb610820a4]
>>>> -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5) [0x7feb626f45b5]
>>>> -->/usr/sbin/glusterfs(cleanup_and_exit+0x59) [0x7feb626f4429] ) 0-:
>>>> received signum (15), shutting down
>>>> [2016-02-15 10:58:45.768093] I [fuse-bridge.c:5683:fini] 0-fuse: Unmounting
>>>> '/tmp/gsyncd-aux-mount-bZ9SMt'.
>>>> [2016-02-15 10:58:54.871855] I [dict.c:473:dict_get]
>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.7.6/xlator/system/posix-acl.so(posix_acl_setxattr_cbk+0x26)
>>>> [0x7f8313dfb166]
>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.7.6/xlator/system/posix-acl.so(handling_other_acl_related_xattr+0x20)
>>>> [0x7f8313dfb060]
>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_get+0x93)
>>>> [0x7f831f3f40c3] ) 0-dict: !this || key=system.posix_acl_access [Invalid
>>>> argument]
>>>> [2016-02-15 10:58:54.871914] I [dict.c:473:dict_get]
>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.7.6/xlator/system/posix-acl.so(posix_acl_setxattr_cbk+0x26)
>>>> [0x7f8313dfb166]
>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.7.6/xlator/system/posix-acl.so(handling_other_acl_related_xattr+0xb0)
>>>> [0x7f8313dfb0f0]
>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_get+0x93)
>>>> [0x7f831f3f40c3] ) 0-dict: !this || key=system.posix_acl_default [Invalid
>>>> argument]
>>>>
>>>> This error gets repeated forever with always the same files. I tried to stop
>>>> and restart the geo-rep on the master but still the same problem and geo
>>>> replication does not proceed. Does anyone have an idea how to fix this?
>>>>
>>>> I am using GlusterFS 3.7.6 on Debian 8 with a two node replicate volume (1
>>>> brick per node) and one single off-site slave node for geo-rep.
>>>>
>>>> Regards
>>>> ML
>>>> _______________________________________________
>>>> Gluster-users mailing list
>>>> Gluster-users at gluster.org
>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>> _______________________________________________
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org
>>> http://www.gluster.org/mailman/listinfo/gluster-users
More information about the Gluster-users
mailing list