[Gluster-users] Fwd: Replica brick not working
Miloš Čučulović - MDPI
cuculovic at mdpi.com
Thu Dec 8 16:14:55 UTC 2016
I was able to fix the sync by rsync-ing all the directories, then the
hale started. The next problem :), as soon as there are files on the new
brick, the gluster mount will render also this one for mounts, and the
new brick is not ready yet, as the sync is not yet done, so it results
on missing files on client side. I temporary removed the new brick, now
I am running a manual rsync and will add the brick again, hope this
could work.
What mechanism is managing this issue, I guess there is something per
built to make a replica brick available only once the data is completely
synced.
- Kindest regards,
Milos Cuculovic
IT Manager
---
MDPI AG
Postfach, CH-4020 Basel, Switzerland
Office: St. Alban-Anlage 66, 4052 Basel, Switzerland
Tel. +41 61 683 77 35
Fax +41 61 302 89 18
Email: cuculovic at mdpi.com
Skype: milos.cuculovic.mdpi
On 08.12.2016 16:17, Ravishankar N wrote:
> On 12/08/2016 06:53 PM, Atin Mukherjee wrote:
>>
>>
>> On Thu, Dec 8, 2016 at 6:44 PM, Miloš Čučulović - MDPI
>> <cuculovic at mdpi.com <mailto:cuculovic at mdpi.com>> wrote:
>>
>> Ah, damn! I found the issue. On the storage server, the storage2
>> IP address was wrong, I inversed two digits in the /etc/hosts
>> file, sorry for that :(
>>
>> I was able to add the brick now, I started the heal, but still no
>> data transfer visible.
>>
> 1. Are the files getting created on the new brick though?
> 2. Can you provide the output of `getfattr -d -m . -e hex
> /data/data-cluster` on both bricks?
> 3. Is it possible to attach gdb to the self-heal daemon on the original
> (old) brick and get a backtrace?
> `gdb -p <pid of self-heal daemon on the orignal brick>`
> thread apply all bt -->share this output
> quit gdb.
>
>
> -Ravi
>>
>> @Ravi/Pranith - can you help here?
>>
>>
>>
>> By doing gluster volume status, I have
>>
>> Status of volume: storage
>> Gluster process TCP Port RDMA Port Online Pid
>> ------------------------------------------------------------------------------
>> Brick storage2:/data/data-cluster 49152 0 Y
>> 23101
>> Brick storage:/data/data-cluster 49152 0 Y
>> 30773
>> Self-heal Daemon on localhost N/A N/A Y
>> 30050
>> Self-heal Daemon on storage N/A N/A Y
>> 30792
>>
>>
>> Any idea?
>>
>> On storage I have:
>> Number of Peers: 1
>>
>> Hostname: 195.65.194.217
>> Uuid: 7c988af2-9f76-4843-8e6f-d94866d57bb0
>> State: Peer in Cluster (Connected)
>>
>>
>> - Kindest regards,
>>
>> Milos Cuculovic
>> IT Manager
>>
>> ---
>> MDPI AG
>> Postfach, CH-4020 Basel, Switzerland
>> Office: St. Alban-Anlage 66, 4052 Basel, Switzerland
>> Tel. +41 61 683 77 35
>> Fax +41 61 302 89 18
>> Email: cuculovic at mdpi.com <mailto:cuculovic at mdpi.com>
>> Skype: milos.cuculovic.mdpi
>>
>> On 08.12.2016 13:55, Atin Mukherjee wrote:
>>
>> Can you resend the attachment as zip? I am unable to extract the
>> content? We shouldn't have 0 info file. What does gluster peer
>> status
>> output say?
>>
>> On Thu, Dec 8, 2016 at 4:51 PM, Miloš Čučulović - MDPI
>> <cuculovic at mdpi.com <mailto:cuculovic at mdpi.com>
>> <mailto:cuculovic at mdpi.com <mailto:cuculovic at mdpi.com>>> wrote:
>>
>> I hope you received my last email Atin, thank you!
>>
>> - Kindest regards,
>>
>> Milos Cuculovic
>> IT Manager
>>
>> ---
>> MDPI AG
>> Postfach, CH-4020 Basel, Switzerland
>> Office: St. Alban-Anlage 66, 4052 Basel, Switzerland
>> Tel. +41 61 683 77 35
>> Fax +41 61 302 89 18
>> Email: cuculovic at mdpi.com <mailto:cuculovic at mdpi.com>
>> <mailto:cuculovic at mdpi.com <mailto:cuculovic at mdpi.com>>
>> Skype: milos.cuculovic.mdpi
>>
>> On 08.12.2016 10:28, Atin Mukherjee wrote:
>>
>>
>> ---------- Forwarded message ----------
>> From: *Atin Mukherjee* <amukherj at redhat.com
>> <mailto:amukherj at redhat.com>
>> <mailto:amukherj at redhat.com
>> <mailto:amukherj at redhat.com>> <mailto:amukherj at redhat.com
>> <mailto:amukherj at redhat.com>
>> <mailto:amukherj at redhat.com
>> <mailto:amukherj at redhat.com>>>>
>> Date: Thu, Dec 8, 2016 at 11:56 AM
>> Subject: Re: [Gluster-users] Replica brick not working
>> To: Ravishankar N <ravishankar at redhat.com
>> <mailto:ravishankar at redhat.com>
>> <mailto:ravishankar at redhat.com
>> <mailto:ravishankar at redhat.com>>
>> <mailto:ravishankar at redhat.com <mailto:ravishankar at redhat.com>
>> <mailto:ravishankar at redhat.com
>> <mailto:ravishankar at redhat.com>>>>
>> Cc: Miloš Čučulović - MDPI <cuculovic at mdpi.com
>> <mailto:cuculovic at mdpi.com>
>> <mailto:cuculovic at mdpi.com <mailto:cuculovic at mdpi.com>>
>> <mailto:cuculovic at mdpi.com <mailto:cuculovic at mdpi.com>
>> <mailto:cuculovic at mdpi.com <mailto:cuculovic at mdpi.com>>>>,
>> Pranith Kumar Karampuri
>> <pkarampu at redhat.com <mailto:pkarampu at redhat.com>
>> <mailto:pkarampu at redhat.com <mailto:pkarampu at redhat.com>>
>> <mailto:pkarampu at redhat.com
>> <mailto:pkarampu at redhat.com> <mailto:pkarampu at redhat.com
>> <mailto:pkarampu at redhat.com>>>>,
>> gluster-users
>> <gluster-users at gluster.org
>> <mailto:gluster-users at gluster.org>
>> <mailto:gluster-users at gluster.org
>> <mailto:gluster-users at gluster.org>>
>> <mailto:gluster-users at gluster.org
>> <mailto:gluster-users at gluster.org>
>> <mailto:gluster-users at gluster.org
>> <mailto:gluster-users at gluster.org>>>>
>>
>>
>>
>>
>> On Thu, Dec 8, 2016 at 11:11 AM, Ravishankar N
>> <ravishankar at redhat.com
>> <mailto:ravishankar at redhat.com> <mailto:ravishankar at redhat.com
>> <mailto:ravishankar at redhat.com>>
>> <mailto:ravishankar at redhat.com
>> <mailto:ravishankar at redhat.com> <mailto:ravishankar at redhat.com
>> <mailto:ravishankar at redhat.com>>>>
>>
>> wrote:
>>
>> On 12/08/2016 10:43 AM, Atin Mukherjee wrote:
>>
>> >From the log snippet:
>>
>> [2016-12-07 09:15:35.677645] I [MSGID: 106482]
>>
>> [glusterd-brick-ops.c:442:__glusterd_handle_add_brick]
>> 0-management: Received add brick req
>> [2016-12-07 09:15:35.677708] I [MSGID: 106062]
>>
>> [glusterd-brick-ops.c:494:__glusterd_handle_add_brick]
>> 0-management: replica-count is 2
>> [2016-12-07 09:15:35.677735] E [MSGID: 106291]
>>
>> [glusterd-brick-ops.c:614:__glusterd_handle_add_brick]
>> 0-management:
>>
>> The last log entry indicates that we hit the
>> code path in
>> gd_addbr_validate_replica_count ()
>>
>> if (replica_count ==
>> volinfo->replica_count) {
>> if (!(total_bricks %
>> volinfo->dist_leaf_count)) {
>> ret = 1;
>> goto out;
>> }
>> }
>>
>>
>> It seems unlikely that this snippet was hit
>> because we print
>> the E
>> [MSGID: 106291] in the above message only if ret==-1.
>> gd_addbr_validate_replica_count() returns -1 and
>> yet not
>> populates
>> err_str only when in volinfo->type doesn't match
>> any of the
>> known
>> volume types, so volinfo->type is corrupted perhaps?
>>
>>
>> You are right, I missed that ret is set to 1 here in
>> the above
>> snippet.
>>
>> @Milos - Can you please provide us the volume info
>> file from
>> /var/lib/glusterd/vols/<volname>/ from all the three
>> nodes to
>> continue
>> the analysis?
>>
>>
>>
>> -Ravi
>>
>> @Pranith, Ravi - Milos was trying to convert a
>> dist (1 X 1)
>> volume to a replicate (1 X 2) using add brick
>> and hit
>> this issue
>> where add-brick failed. The cluster is
>> operating with 3.7.6.
>> Could you help on what scenario this code path
>> can be
>> hit? One
>> straight forward issue I see here is missing
>> err_str in
>> this path.
>>
>>
>>
>>
>>
>>
>> --
>>
>> ~ Atin (atinm)
>>
>>
>>
>> --
>>
>> ~ Atin (atinm)
>>
>>
>>
>>
>> --
>>
>> ~ Atin (atinm)
>>
>>
>>
>>
>> --
>>
>> ~ Atin (atinm)
>
>
More information about the Gluster-users
mailing list