[Gluster-users] glusterfsd not starting at boot with Debian 7

ML mail mlnospam at yahoo.com
Thu Feb 5 13:16:54 UTC 2015


Dear Pranith

As asked you will find below the glusterd logfile including the log entries at the boot of the server. On Debian the logfile is located in the /var/log/glusterfs/etc-glusterfs-glusterd.vol.log file.


[2015-02-05 13:13:03.566059] I [glusterfsd.c:1959:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.5.3 (/usr/sbin/glusterd -p /var/run/glusterd.pid)
[2015-02-05 13:13:03.580131] I [glusterd.c:1122:init] 0-management: Using /var/lib/glusterd as working directory
[2015-02-05 13:13:03.583040] I [socket.c:3645:socket_init] 0-socket.management: SSL support is NOT enabled
[2015-02-05 13:13:03.583060] I [socket.c:3660:socket_init] 0-socket.management: using system polling thread
[2015-02-05 13:13:03.585326] W [rdma.c:4194:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device)
[2015-02-05 13:13:03.585343] E [rdma.c:4482:init] 0-rdma.management: Failed to initialize IB Device
[2015-02-05 13:13:03.585350] E [rpc-transport.c:333:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed
[2015-02-05 13:13:03.585392] W [rpcsvc.c:1535:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed
[2015-02-05 13:13:03.585446] I [socket.c:3645:socket_init] 0-socket.management: SSL support is NOT enabled
[2015-02-05 13:13:03.585454] I [socket.c:3660:socket_init] 0-socket.management: using system polling thread
[2015-02-05 13:13:06.111967] I [glusterd-store.c:1421:glusterd_restore_op_version] 0-glusterd: retrieved op-version: 30501
[2015-02-05 13:13:06.114871] E [glusterd-store.c:1979:glusterd_store_retrieve_volume] 0-: Unknown key: brick-0
[2015-02-05 13:13:06.277826] I [glusterd.c:138:glusterd_uuid_init] 0-management: retrieved UUID: 459ca0c5-8400-4392-9846-fcef98772f44
Final graph:
+------------------------------------------------------------------------------+
1: volume management
2:     type mgmt/glusterd
3:     option rpc-auth.auth-glusterfs on
4:     option rpc-auth.auth-unix on
5:     option rpc-auth.auth-null on
6:     option transport.socket.listen-backlog 128
7:     option rpc-auth-allow-insecure on
8:     option transport.socket.read-fail-log off
9:     option transport.socket.keepalive-interval 2
10:     option transport.socket.keepalive-time 10
11:     option transport-type rdma
12:     option working-directory /var/lib/glusterd
13: end-volume
14:
+------------------------------------------------------------------------------+
[2015-02-05 13:13:06.281802] I [rpc-clnt.c:972:rpc_clnt_connection_init] 0-management: setting frame-timeout to 600
[2015-02-05 13:13:06.281889] I [socket.c:3645:socket_init] 0-management: SSL support is NOT enabled
[2015-02-05 13:13:06.281902] I [socket.c:3660:socket_init] 0-management: using system polling thread
[2015-02-05 13:13:06.282359] I [socket.c:2321:socket_event_handler] 0-transport: disconnecting now
[2015-02-05 13:13:06.285676] I [rpc-clnt.c:972:rpc_clnt_connection_init] 0-management: setting frame-timeout to 600
[2015-02-05 13:13:06.285770] I [socket.c:3645:socket_init] 0-management: SSL support is NOT enabled
[2015-02-05 13:13:06.285786] I [socket.c:3660:socket_init] 0-management: using system polling thread
[2015-02-05 13:13:06.285982] I [glusterd-handler.c:3713:__glusterd_brick_rpc_notify] 0-management: Disconnected from gfs1a:/data/myvol/brick
[2015-02-05 13:13:06.286042] I [socket.c:2321:socket_event_handler] 0-transport: disconnecting now





On Thursday, February 5, 2015 12:02 PM, Pranith Kumar Karampuri <pkarampu at redhat.com> wrote:

On 02/05/2015 04:08 AM, ML mail wrote:
> Hi,
>
> I have installed Gluster 3.5.3 on Debian 7 and have one single test volume right now. Unfortunately after a reboot this volume does not get get started automatically: the glusterfsd process for that volume is inexistant although the glusterd process is running.
>
>
> After a boot running "gluster volume status" shows:
> Status of volume: myvol
> Gluster process                        Port    Online    Pid
> ------------------------------------------------------------------------------
> Brick gfs1a:/data/myvol/brick                N/A    N    N/A
>
> Task Status of Volume myvol
> ------------------------------------------------------------------------------
>
> There are no active volume tasks
>
> as you can see all N/A there. In order to make it work I have to run "gluster volume stop myvol" and "gluster volume start myvol". Then it is ready and working. What could the problem be? Is the init.d startup srcript on Debian 7 buggy?
If glusterd is starting then there shouldn't be any bug in the init 
scripts. Could you attach the log file of glusterd? I am not sure where 
it is stored in debian may be /var/log/glusterfs or 
/usr/local/var/log/glusterfs it will have glusterd in the name of the file.

Pranith

>
> Best regards
> ML
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users


More information about the Gluster-users mailing list