[Gluster-users] libgfapi access

Fri Dec 11 03:56:49 UTC 2015


On 12/10/2015 07:15 PM, Ankireddypalle Reddy wrote:
> Hi,
>       Please let me know in case you need any more details. Even for only write operations fuse seems to outperform libgfapi. Is it because of disperse volumes?. Also I noticed a lot of data loss in case I use libgfapi asyn I/O for disperse volumes.
Fuse and gfapi seem to take same amount of time to complete the run, 
i.e. 18 seconds. Could you let me know what you mean by fuse 
outperforming gfapi?

Pranith
>
> Thanks and Regards,
> Ram
>
> -----Original Message-----
> From: Ankireddypalle Reddy
> Sent: Wednesday, December 09, 2015 5:01 PM
> To: 'Pranith Kumar Karampuri'; Vijay Bellur; gluster-users at gluster.org
> Subject: RE: [Gluster-users] libgfapi access
>
> Hi,
>           I upgraded my setup to gluster 3.7.3. I tested writes by performing writes through fuse and through libgfapi. Attached are the profiles generated from fuse and libgfapi. The test programs essentially writes 10000 blocks each of 128K.
>
> [root at santest2 Base]# time ./GlusterFuseTest /ws/glus 131072 10000 Mount path: /ws/glus Block size: 131072 Num of blocks: 10000 Will perform write test on mount path : /ws/glus Succesfully created file /ws/glus/1449697583.glfs Successfully filled file /ws/glus/1449697583.glfs Write test succeeded Write test succeeded.
>
> real    0m18.722s
> user    0m3.913s
> sys     0m1.126s
>
> [root at santest2 Base]# time ./GlusterLibGFApiTest dispersevol santest2 24007 131072 10000 Host name: santest2
> Volume: dispersevol
> Port: 24007
> Block size: 131072
> Num of blocks: 10000
> Will perform write test on volume: dispersevol Successfully filled file 1449697651.glfs Write test succeeded Write test succeeded.
>
> real    0m18.630s
> user    0m8.804s
> sys     0m1.870s
>
> Thanks and Regards,
> Ram
>
>    
>
> -----Original Message-----
> From: Pranith Kumar Karampuri [mailto:pkarampu at redhat.com]
> Sent: Wednesday, December 09, 2015 1:39 AM
> To: Ankireddypalle Reddy; Vijay Bellur; gluster-users at gluster.org
> Subject: Re: [Gluster-users] libgfapi access
>
>
>
> On 12/08/2015 08:28 PM, Ankireddypalle Reddy wrote:
>> Vijay,
>>                We are trying to write data backed up by Commvault simpana to glusterfs volume.  The data being written is around 30 GB. Two kinds of write requests happen.
>> 	1) 1MB requests
>> 	2) Small write requests of size 128 bytes. In case of libgfapi access these are cached and a single 128KB write request is made where as in case of FUSE the 128 byte write request is handled to FUSE directly.
>>
>> 	glusterfs 3.6.5 built on Aug 24 2015 10:02:43
>>
>>                   Volume Name: dispersevol
>> 	Type: Disperse
>> 	Volume ID: c5d6ccf8-6fec-4912-ab2e-6a7701e4c4c0
>> 	Status: Started
>> 	Number of Bricks: 1 x (2 + 1) = 3
>> 	Transport-type: tcp
>> 	Bricks:
>> 	Brick1: ssdtest:/mnt/ssdfs1/brick3
>> 	Brick2: sanserver2:/data/brick3
>> 	Brick3: santest2:/home/brick3
>> 	Options Reconfigured:
>> 	performance.cache-size: 512MB
>> 	performance.write-behind-window-size: 8MB
>> 	performance.io-thread-count: 32
>> 	performance.flush-behind: on
> hi,
>        Things look okay. May be we can find something using profile info.
>
> Could you post the results of the following operations:
> 1) gluster volume profile <volname> start
> 2) Run the fuse workload
> 3) gluster volume profile <volname> info > /path/to/file-1/to/send/us
> 4) Run the libgfapi workload
> 5)gluster volume profile <volname> info > /path/to/file-2/to/send/us
>
> Send both these files to us to check what are the extra fops if any that are sent over network which may be causing the delay.
>
> I see that you are using disperse volume. If you are going to use disperse volume for production usecases, I suggest you use 3.7.x preferably 3.7.3. We fixed a bug in releases from 3.7.4 till 3.7.6 which will be released in 3.7.7.
>
> Pranith
>> Thanks and Regards,
>> Ram
>>
>>
>> -----Original Message-----
>> From: Vijay Bellur [mailto:vbellur at redhat.com]
>> Sent: Monday, December 07, 2015 6:13 PM
>> To: Ankireddypalle Reddy; gluster-users at gluster.org
>> Subject: Re: [Gluster-users] libgfapi access
>>
>> On 12/07/2015 10:29 AM, Ankireddypalle Reddy wrote:
>>> Hi,
>>>
>>>           I am trying to use  libgfapi  interface to access gluster
>>> volume. What I noticed is that reads/writes to the gluster volume
>>> through libgfapi interface are slower than FUSE.  I was expecting the
>>> contrary. Are there any recommendations/settings suggested to be used
>>> while using libgfapi interface.
>>>
>> Can you please provide more details about your tests? Providing information like I/O block size, file size, throughput would be helpful.
>>
>> Thanks,
>> Vijay
>>
>>
>>
>>
>>
>> ***************************Legal Disclaimer***************************
>> "This communication may contain confidential and privileged material
>> for the sole use of the intended recipient. Any unauthorized review,
>> use or distribution by others is strictly prohibited. If you have
>> received the message by mistake, please advise the sender by reply email and delete the message. Thank you."
>> **********************************************************************
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://www.gluster.org/mailman/listinfo/gluster-users
>
>
>
> ***************************Legal Disclaimer***************************
> "This communication may contain confidential and privileged material for the
> sole use of the intended recipient. Any unauthorized review, use or distribution
> by others is strictly prohibited. If you have received the message by mistake,
> please advise the sender by reply email and delete the message. Thank you."
> **********************************************************************